Package: pulseaudio
Version: 16.1+dfsg1-2+b1
Severity: normal
X-Debbugs-Cc: [email protected]
Dear Maintainer,
I upgraded my system (Dell XPS 13 laptop) to Debian 12 today.
The Pulseaudio daemon does not start automatically at start up.
I can fix the problem by issuing:
systemctl --user stop pulseaudio.socket
systemctl --user stop pulseaudio.service
systemctl --user start pulseaudio.socket
systemctl --user start pulseaudio.service
sudo pulseaudio --system
I'd like to know how to fix the issue cleanly.
Could you please help?
You'll find below some information to help debugging.
Feel free to ask more.
Best,
Eric CM
$ pacmd info
No PulseAudio daemon running, or not running as session daemon.
$ pacmd list-sinks
No PulseAudio daemon running, or not running as session daemon.
$ fuser -v /dev/snd/*
$ fuser -v /dev/dsp
Specified filename /dev/dsp does not exist.
$ loginctl show-session $XDG_SESSION_ID
[stalls]
$ pulseaudio -v
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not
permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not
permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 16.1
I: [pulseaudio] main.c: Page size is 4096 bytes
[...]
D: [pulseaudio] module.c: Checking for existence of
'/usr/lib/pulse-16.1+dfsg1/modules/module-esound-protocol-unix.so': failure
E: [pulseaudio] socket-server.c: bind(): Address already in use
E: [pulseaudio] module.c: Failed to load module "module-native-protocol-unix"
(argument: ""): initialization failed.
[...]
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #19; argument:
"").
E: [pulseaudio] main.c: D-Bus name org.pulseaudio.Server already taken.
I: [pulseaudio] main.c: Daemon startup complete.
[...]
I: [pulseaudio] module-suspend-on-idle.c: Sink
alsa_output.pci-0000_00_1f.3.analog-stereo idle for too long, suspending ...
I: [alsa-sink-ALC3246 Analog] alsa-sink.c: Device suspended...
$ pactl info
Server String: /run/user/1000/pulse/native
Library Protocol Version: 35
Server Protocol Version: 35
Is Local: yes
Client Index: 39
Tile Size: 65472
User Name: ecm
Host Name: tchao
Server Name: PulseAudio (on PipeWire 0.3.65)
Server Version: 15.0.0
Default Sample Specification: float32le 2ch 48000Hz
Default Channel Map: front-left,front-right
Default Sink: @DEFAULT_SINK@
Default Source: @DEFAULT_SOURCE@
Cookie: 4c9b:a38b
$ pactl list modules short
1 libpipewire-module-rt {
nice.level = -11
#rt.prio = 88
#rt.time.soft = -1
#rt.time.hard = -1
}
2 libpipewire-module-protocol-native
3 libpipewire-module-profiler
5 libpipewire-module-metadata
7 libpipewire-module-spa-device-factory
9 libpipewire-module-spa-node-factory
11 libpipewire-module-client-node
13 libpipewire-module-client-device
15 libpipewire-module-portal
16 libpipewire-module-access {
# access.allowed to list an array of paths of allowed
# apps.
#access.allowed = [
# /usr/bin/pipewire-media-session
#]
# An array of rejected paths.
#access.rejected = [ ]
# An array of paths with restricted access.
#access.restricted = [ ]
# Anything not in the above lists gets assigned the
# access.force permission.
#access.force = flatpak
}
17 libpipewire-module-adapter
19 libpipewire-module-link-factory
21 libpipewire-module-session-manager
536870912 module-always-sink
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: 12.0
APT prefers stable
APT policy: (900, 'stable'), (500, 'stable-security')
Architecture: amd64 (x86_64)
Kernel: Linux 5.10.0-21-amd64 (SMP w/4 CPU threads)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages pulseaudio depends on:
ii adduser 3.134
ii init-system-helpers 1.65.2
ii libasound2 1.2.8-1+b1
ii libasound2-plugins 1.2.7.1-1
ii libc6 2.36-9
ii libcap2 1:2.66-4
ii libdbus-1-3 1.14.6-1
ii libfftw3-single3 3.3.10-1
ii libgcc-s1 12.2.0-14
ii libglib2.0-0 2.74.6-2
ii libgstreamer-plugins-base1.0-0 1.22.0-3
ii libgstreamer1.0-0 1.22.0-2
ii libice6 2:1.0.10-1
ii libltdl7 2.4.7-5
ii liborc-0.4-0 1:0.4.33-2
ii libpulse0 16.1+dfsg1-2+b1
ii libsm6 2:1.2.3-1
ii libsndfile1 1.2.0-1
ii libsoxr0 0.1.3-4
ii libspeexdsp1 1.2.1-1
ii libstdc++6 12.2.0-14
ii libsystemd0 252.6-1
ii libtdb1 1.4.8-2
ii libudev1 252.6-1
ii libwebrtc-audio-processing1 0.3-1+b1
ii libwrap0 7.6.q-32
ii libx11-6 2:1.8.4-2
ii libx11-xcb1 2:1.8.4-2
ii libxcb1 1.15-1
ii libxtst6 2:1.2.3-1.1
ii lsb-base 11.6
ii pulseaudio-utils 16.1+dfsg1-2+b1
ii sysvinit-utils [lsb-base] 3.06-4
Versions of packages pulseaudio recommends:
ii dbus-user-session 1.14.6-1
ii libpam-systemd [logind] 252.6-1
ii rtkit 0.13-5
Versions of packages pulseaudio suggests:
pn paprefs <none>
ii pavucontrol 5.0-2
pn pavumeter <none>
ii udev 252.6-1
-- no debconf information
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; remixing-produce-lfe = no
; remixing-consume-lfe = no
; lfe-crossover-freq = 0
; flat-volumes = no
; rescue-streams = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the
paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
### Allow including a default.pa.d directory, which if present, can be used
### for additional configuration snippets.
### Note that those snippet files must have a .pa file extension, not .conf
.nofail
.include /etc/pulse/default.pa.d
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
### Allow including a system.pa.d directory, which if present, can be used
### for additional configuration snippets.
### Note that those snippet files must have a .pa file extension, not .conf
.nofail
.include /etc/pulse/system.pa.d
null
Discard all samples (playback) or generate zero samples (capture)
default
Playback/recording through the PulseAudio sound server
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
hw:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
Direct hardware device without any conversions
hw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct hardware device without any conversions
hw:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Direct hardware device without any conversions
hw:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Direct hardware device without any conversions
hw:CARD=PCH,DEV=9
HDA Intel PCH, HDMI 3
Direct hardware device without any conversions
hw:CARD=PCH,DEV=10
HDA Intel PCH, HDMI 4
Direct hardware device without any conversions
plughw:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
Hardware device with all software conversions
plughw:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Hardware device with all software conversions
plughw:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Hardware device with all software conversions
plughw:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Hardware device with all software conversions
plughw:CARD=PCH,DEV=9
HDA Intel PCH, HDMI 3
Hardware device with all software conversions
plughw:CARD=PCH,DEV=10
HDA Intel PCH, HDMI 4
Hardware device with all software conversions
sysdefault:CARD=PCH
HDA Intel PCH, ALC3246 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
Front output / input
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
hdmi:CARD=PCH,DEV=2
HDA Intel PCH, HDMI 2
HDMI Audio Output
hdmi:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 3
HDMI Audio Output
hdmi:CARD=PCH,DEV=4
HDA Intel PCH, HDMI 4
HDMI Audio Output
dmix:CARD=PCH,DEV=0
HDA Intel PCH, ALC3246 Analog
Direct sample mixing device
dmix:CARD=PCH,DEV=3
HDA Intel PCH, HDMI 0
Direct sample mixing device
dmix:CARD=PCH,DEV=7
HDA Intel PCH, HDMI 1
Direct sample mixing device
dmix:CARD=PCH,DEV=8
HDA Intel PCH, HDMI 2
Direct sample mixing device
dmix:CARD=PCH,DEV=9
HDA Intel PCH, HDMI 3
Direct sample mixing device
dmix:CARD=PCH,DEV=10
HDA Intel PCH, HDMI 4
Direct sample mixing device
usbstream:CARD=PCH
HDA Intel PCH
USB Stream Output
Module #1
Name: libpipewire-module-rt
Argument: {
nice.level = -11
#rt.prio = 88
#rt.time.soft = -1
#rt.time.hard = -1
}
Usage counter: n/a
Properties:
module.name = "libpipewire-module-rt"
object.id = "1"
object.serial = "1"
module.author = "Wim Taymans <[email protected]>"
module.description = "Use realtime thread scheduling, falling
back to RTKit"
module.usage = "[nice.level=<priority: default 20(don't
change)>] [rt.prio=<priority: default 88>] [rt.time.soft=<in usec: default -1]
[rt.time.hard=<in usec: default -1] "
module.version = "0.3.65"
nice.level = "-11"
Module #2
Name: libpipewire-module-protocol-native
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-protocol-native"
object.id = "2"
object.serial = "2"
module.author = "Wim Taymans <[email protected]>"
module.description = "Native protocol using unix sockets"
module.version = "0.3.65"
Module #3
Name: libpipewire-module-profiler
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-profiler"
object.id = "3"
object.serial = "3"
module.author = "Wim Taymans <[email protected]>"
module.description = "Generate Profiling data"
module.version = "0.3.65"
Module #5
Name: libpipewire-module-metadata
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-metadata"
object.id = "5"
object.serial = "5"
module.author = "Wim Taymans <[email protected]>"
module.description = "Allow clients to create metadata store"
module.version = "0.3.65"
Module #7
Name: libpipewire-module-spa-device-factory
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-spa-device-factory"
object.id = "7"
object.serial = "7"
module.author = "Wim Taymans <[email protected]>"
module.description = "Provide a factory to make SPA devices"
module.version = "0.3.65"
Module #9
Name: libpipewire-module-spa-node-factory
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-spa-node-factory"
object.id = "9"
object.serial = "9"
module.author = "Wim Taymans <[email protected]>"
module.description = "Provide a factory to make SPA nodes"
module.version = "0.3.65"
Module #11
Name: libpipewire-module-client-node
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-client-node"
object.id = "11"
object.serial = "11"
module.author = "Wim Taymans <[email protected]>"
module.description = "Allow clients to create and control
remote nodes"
module.version = "0.3.65"
Module #13
Name: libpipewire-module-client-device
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-client-device"
object.id = "13"
object.serial = "13"
module.author = "Wim Taymans <[email protected]>"
module.description = "Allow clients to create and control
remote devices"
module.version = "0.3.65"
Module #15
Name: libpipewire-module-portal
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-portal"
object.id = "15"
object.serial = "15"
Module #16
Name: libpipewire-module-access
Argument: {
# access.allowed to list an array of paths of allowed
# apps.
#access.allowed = [
# /usr/bin/pipewire-media-session
#]
# An array of rejected paths.
#access.rejected = [ ]
# An array of paths with restricted access.
#access.restricted = [ ]
# Anything not in the above lists gets assigned the
# access.force permission.
#access.force = flatpak
}
Usage counter: n/a
Properties:
module.name = "libpipewire-module-access"
object.id = "16"
object.serial = "16"
module.author = "Wim Taymans <[email protected]>"
module.description = "Perform access check"
module.usage = "[ access.force=flatpak ] [
access.allowed=<cmd-line> ] [ access.rejected=<cmd-line> ] [
access.restricted=<cmd-line> ] "
module.version = "0.3.65"
Module #17
Name: libpipewire-module-adapter
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-adapter"
object.id = "17"
object.serial = "17"
module.author = "Wim Taymans <[email protected]>"
module.description = "Manage adapter nodes"
module.version = "0.3.65"
Module #19
Name: libpipewire-module-link-factory
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-link-factory"
object.id = "19"
object.serial = "19"
module.author = "Wim Taymans <[email protected]>"
module.description = "Allow clients to create links"
module.version = "0.3.65"
Module #21
Name: libpipewire-module-session-manager
Argument:
Usage counter: n/a
Properties:
module.name = "libpipewire-module-session-manager"
object.id = "21"
object.serial = "21"
module.author = "George Kiagiadakis
<[email protected]>"
module.description = "Implements objects for session management"
module.version = "0.3.65"
Module #536870912
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Pauli Virtanen <[email protected]>"
module.description = "Always keeps at least one sink loaded
even if it's a null one"
module.usage = "sink_name=<name of sink>"
module.version = "0.3.65"
Sink #32
State: SUSPENDED
Name: auto_null
Description: Dummy Output
Driver: PipeWire
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: auto_null.monitor
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
node.name = "auto_null"
device.description = "Dummy Output"
audio.rate = "48000"
audio.channels = "2"
audio.position = "FL,FR"
media.class = "Audio/Sink"
factory.name = "support.null-audio-sink"
node.virtual = "true"
monitor.channel-volumes = "true"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "31"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "32"
object.serial = "32"
Formats:
pcm
Source #32
State: SUSPENDED
Name: auto_null.monitor
Description: Monitor of Dummy Output
Driver: PipeWire
Sample Specification: float32le 2ch 48000Hz
Channel Map: front-left,front-right
Owner Module: 4294967295
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: auto_null
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
node.name = "auto_null"
device.description = "Dummy Output"
audio.rate = "48000"
audio.channels = "2"
audio.position = "FL,FR"
media.class = "Audio/Sink"
factory.name = "support.null-audio-sink"
node.virtual = "true"
monitor.channel-volumes = "true"
factory.id = "18"
clock.quantum-limit = "8192"
client.id = "31"
node.driver = "true"
factory.mode = "merge"
audio.adapt.follower = ""
library.name = "audioconvert/libspa-audioconvert"
object.id = "32"
object.serial = "32"
device.class = "monitor"
Formats:
pcm
Client #31
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "1311"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "31"
object.serial = "31"
config.name = "pipewire-pulse.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
application.name = "pipewire"
application.process.binary = "pipewire"
application.language = "en_US.UTF-8"
application.process.id = "1311"
application.process.user = "ecm"
application.process.host = "tchao"
core.version = "0.3.65"
core.name = "pipewire-ecm-1311"
pipewire.access = "unrestricted"
Client #33
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "1464"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "33"
object.serial = "33"
pipewire.access.portal.is_portal = "true"
portal.monitor = "Camera"
log.level = "0"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
application.name = "xdg-desktop-portal"
application.process.binary = "xdg-desktop-portal"
application.language = "en_US.UTF-8"
application.process.id = "1464"
application.process.user = "ecm"
application.process.host = "tchao"
window.x11.display = ":0"
core.version = "0.3.65"
core.name = "pipewire-ecm-1464"
pipewire.access = "unrestricted"
Client #35
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "1311"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "34"
object.serial = "35"
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.name = "xfce4-pulseaudio-plugin"
application.version = "0.4.5"
application.id = "org.xfce.pulseaudio-plugin"
application.icon_name = "multimedia-volume-control"
application.process.id = "1692"
application.process.user = "ecm"
application.process.host = "tchao"
application.process.binary = "wrapper-2.0"
application.language = "en_US.UTF-8"
window.x11.display = ":0.0"
application.process.machine_id =
"7c2399336f5e41d593fb9cc5b8f70dc2"
application.process.session_id = "2"
config.name = "pipewire-pulse.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
core.version = "0.3.65"
core.name = "pipewire-ecm-1311"
pipewire.access = "unrestricted"
Client #36
Driver: PipeWire
Owner Module: 2
Properties:
pipewire.protocol = "protocol-native"
pipewire.sec.pid = "1311"
pipewire.sec.uid = "1000"
pipewire.sec.gid = "1000"
module.id = "2"
object.id = "35"
object.serial = "36"
client.api = "pipewire-pulse"
pulse.server.type = "unix"
application.process.id = "2951"
application.process.user = "ecm"
application.process.host = "tchao"
application.process.binary = "pactl"
application.name = "pactl"
application.language = "C"
window.x11.display = ":0.0"
application.process.machine_id =
"7c2399336f5e41d593fb9cc5b8f70dc2"
application.process.session_id = "2"
config.name = "pipewire-pulse.conf"
cpu.max-align = "32"
default.clock.rate = "48000"
default.clock.quantum = "1024"
default.clock.min-quantum = "32"
default.clock.max-quantum = "2048"
default.clock.quantum-limit = "8192"
default.video.width = "640"
default.video.height = "480"
default.video.rate.num = "25"
default.video.rate.denom = "1"
log.level = "2"
clock.power-of-two-quantum = "true"
link.max-buffers = "64"
mem.warn-mlock = "false"
mem.allow-mlock = "true"
settings.check-quantum = "false"
settings.check-rate = "false"
core.version = "0.3.65"
core.name = "pipewire-ecm-1311"
pipewire.access = "unrestricted"
Server String: /run/user/1000/pulse/native
Library Protocol Version: 35
Server Protocol Version: 35
Is Local: yes
Client Index: 37
Tile Size: 65472
User Name: ecm
Host Name: tchao
Server Name: PulseAudio (on PipeWire 0.3.65)
Server Version: 15.0.0
Default Sample Specification: float32le 2ch 48000Hz
Default Channel Map: front-left,front-right
Default Sink: @DEFAULT_SINK@
Default Source: @DEFAULT_SOURCE@
Cookie: 4c9b:a38b
_______________________________________________
pkg-pulseaudio-devel mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/pkg-pulseaudio-devel
