Your message dated Wed, 08 Apr 2020 10:48:38 +0000
with message-id <[email protected]>
and subject line Bug#947556: fixed in create-resources 0.1.3-6
has caused the Debian Bug report #947556,
regarding FTBFS with scons 3.1.2-1
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
947556: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=947556
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Source: create-resources
Version: 0.1.3-5
Severity: important
Usertags: scons_ftbfs
Hello,
in the context of the change to Python3 also Scons was revised. With
the current version 3.1.2-1 from Experimental the changeover is
finished so far.
However, an error occurred while building your package. The build log
is attached.
Please check it and fix the error.
CU
Jörg
--
New:
GPG Fingerprint: 63E0 075F C8D4 3ABB 35AB 30EE 09F8 9F3C 8CA1 D25D
GPG key (long) : 09F89F3C8CA1D25D
GPG Key : 8CA1D25D
CAcert Key S/N : 0E:D4:56
Old pgp Key: BE581B6E (revoked since 2014-12-31).
Jörg Frings-Fürst
D-54470 Lieser
git: https://jff.email/cgit/
Threema: SYR8SJXB
Wire: @joergfringsfuerst
Skype: joergpenguin
Ring: jff
Telegram: @joergfringsfuerst
My wish list:
- Please send me a picture from the nature at your home.
dh clean
dh: Compatibility levels before 9 are deprecated (level 7 in use)
debian/rules override_dh_auto_clean
make[1]: Entering directory
'/data/entwicklung/linux/debian/trans_scons/create-resources-0.1.3'
dh_auto_clean
dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use)
rm -f .sconsign.dblite
make[1]: Leaving directory
'/data/entwicklung/linux/debian/trans_scons/create-resources-0.1.3'
debian/rules override_dh_clean
make[1]: Entering directory
'/data/entwicklung/linux/debian/trans_scons/create-resources-0.1.3'
dh_clean -XSConscript~
dh_clean: Compatibility levels before 9 are deprecated (level 7 in use)
make[1]: Leaving directory
'/data/entwicklung/linux/debian/trans_scons/create-resources-0.1.3'
dpkg-source: info: using source format '3.0 (quilt)'
dpkg-source: info: building create-resources using existing
./create-resources_0.1.3.orig.tar.gz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: building create-resources in
create-resources_0.1.3-5.debian.tar.xz
dpkg-source: info: building create-resources in create-resources_0.1.3-5.dsc
[0mI: Generating source changes file for original dsc[0m
dpkg-genchanges: info: not including original source code in upload
[1;33mW: cgroups are not available on the host, not using them.[0m
[0mI: pbuilder: network access will be disabled during build[0m
[0mI: Current time: Fri Dec 27 11:51:59 CET 2019[0m
[0mI: pbuilder-time-stamp: 1577443919[0m
[0mI: Building the build Environment[0m
[0mI: extracting base tarball [/var/cache/pbuilder/sid-amd64-base.tgz][0m
[0mI: copying local configuration[0m
[0mI: mounting /proc filesystem[0m
[0mI: mounting /sys filesystem[0m
[0mI: creating /{dev,run}/shm[0m
[0mI: mounting /dev/pts filesystem[0m
[0mI: redirecting /dev/ptmx to /dev/pts/ptmx[0m
[0mI: Mounting /var/cache/debs[0m
[0mI: policy-rc.d already exists[0m
[1;33mW: Could not create compatibility symlink because /tmp/buildd exists and
it is not a directory[0m
[0mI: Obtaining the cached apt archive contents[0m
[0mI: Copying source file[0m
[0mI: copying [../create-resources_0.1.3-5.dsc][0m
[0mI: copying [../create-resources_0.1.3.orig.tar.gz][0m
[0mI: copying [../create-resources_0.1.3-5.debian.tar.xz][0m
[0mI: Extracting source[0m
dpkg-source: warning: extracting unsigned source package
(create-resources_0.1.3-5.dsc)
dpkg-source: info: extracting create-resources in create-resources-0.1.3
dpkg-source: info: unpacking create-resources_0.1.3.orig.tar.gz
dpkg-source: info: unpacking create-resources_0.1.3-5.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 0001-add_name_header_to_GIMP_palettes.patch
[0mI: using fakeroot in build.[0m
[0mI: Installing the build-deps[0m
[0mI: user script /var/cache/pbuilder/build//304480/tmp/hooks/D05deps
starting[0m
Get:1 file:/var/cache/debs ./ InRelease
Ign:1 file:/var/cache/debs ./ InRelease
Get:2 file:/var/cache/debs ./ Release
Ign:2 file:/var/cache/debs ./ Release
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages
Ign:3 file:/var/cache/debs ./ Packages
Get:3 file:/var/cache/debs ./ Packages [897 B]
Get:4 http://mirror.eu.oneandone.net/debian/ sid InRelease [142 kB]
Get:5 http://mirror.eu.oneandone.net/debian/ sid/non-free amd64
Packages.diff/Index [27.8 kB]
Get:6 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages.diff/Index
[27.9 kB]
Get:7 http://mirror.eu.oneandone.net/debian/ sid/non-free amd64 Packages
2019-12-25-0215.49.pdiff [200 B]
Get:7 http://mirror.eu.oneandone.net/debian/ sid/non-free amd64 Packages
2019-12-25-0215.49.pdiff [200 B]
Get:8 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-24-1431.59.pdiff [15.5 kB]
Get:9 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-24-2015.43.pdiff [20.2 kB]
Get:10 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-25-0215.49.pdiff [37.9 kB]
Get:11 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-25-0820.35.pdiff [5708 B]
Get:12 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-25-1417.31.pdiff [11.6 kB]
Get:13 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-25-2020.01.pdiff [14.2 kB]
Get:14 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-26-0217.44.pdiff [41.8 kB]
Get:15 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-26-0820.50.pdiff [7032 B]
Get:16 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-26-1413.53.pdiff [13.1 kB]
Get:17 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-26-2017.33.pdiff [33.4 kB]
Get:18 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-27-0215.07.pdiff [17.7 kB]
Get:19 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-27-0815.12.pdiff [8159 B]
Get:19 http://mirror.eu.oneandone.net/debian/ sid/main amd64 Packages
2019-12-27-0815.12.pdiff [8159 B]
Fetched 425 kB in 2s (211 kB/s)
Reading package lists...
[0mI: user script /var/cache/pbuilder/build//304480/tmp/hooks/D05deps
finished[0m
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: amd64
Maintainer: Debian Pbuilder Team <[email protected]>
Description: Dummy package to satisfy dependencies with aptitude - created by
pbuilder
This package was created automatically by pbuilder to satisfy the
build-dependencies of the package being currently built.
Depends: debhelper (>= 7.0.50~), scons
dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in
'/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Selecting previously unselected package pbuilder-satisfydepends-dummy.
(Reading database ... 15785 files and directories currently installed.)
Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ...
Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ...
dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring
anyway as you requested:
pbuilder-satisfydepends-dummy depends on debhelper (>= 7.0.50~); however:
Package debhelper is not installed.
pbuilder-satisfydepends-dummy depends on scons; however:
Package scons is not installed.
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
Building tag database...
pbuilder-satisfydepends-dummy is already installed at the requested version
(0.invalid.0)
pbuilder-satisfydepends-dummy is already installed at the requested version
(0.invalid.0)
The following NEW packages will be installed:
autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdmainutils{a}
debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a}
gettext{a} gettext-base{a} groff-base{a} intltool-debian{a}
libarchive-zip-perl{a} libbsd0{a} libcroco3{a} libdebhelper-perl{a} libelf1{a}
libexpat1{a} libfile-stripnondeterminism-perl{a} libicu63{a} libmagic-mgc{a}
libmagic1{a} libmpdec2{a} libpipeline1{a} libpython3-stdlib{a}
libpython3.7-minimal{a} libpython3.7-stdlib{a} libreadline8{a} libsigsegv2{a}
libssl1.1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a}
m4{a} man-db{a} mime-support{a} po-debconf{a} python3{a} python3-minimal{a}
python3.7{a} python3.7-minimal{a} readline-common{a} scons{a} sensible-utils{a}
The following packages are RECOMMENDED but will NOT be installed:
curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl lynx wget
0 packages upgraded, 47 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/25.2 MB of archives. After unpacking 97.8 MB will be used.
Writing extended state information...
Get: 1 file:/var/cache/debs ./ scons 3.1.2-1 [564 kB]
Preconfiguring packages ...
Selecting previously unselected package libbsd0:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 15785 files and directories currently installed.)
Preparing to unpack .../0-libbsd0_0.10.0-1_amd64.deb ...
Unpacking libbsd0:amd64 (0.10.0-1) ...
Selecting previously unselected package bsdmainutils.
Preparing to unpack .../1-bsdmainutils_11.1.2+b1_amd64.deb ...
Unpacking bsdmainutils (11.1.2+b1) ...
Selecting previously unselected package libuchardet0:amd64.
Preparing to unpack .../2-libuchardet0_0.0.6-3_amd64.deb ...
Unpacking libuchardet0:amd64 (0.0.6-3) ...
Selecting previously unselected package groff-base.
Preparing to unpack .../3-groff-base_1.22.4-4_amd64.deb ...
Unpacking groff-base (1.22.4-4) ...
Selecting previously unselected package libpipeline1:amd64.
Preparing to unpack .../4-libpipeline1_1.5.1-3_amd64.deb ...
Unpacking libpipeline1:amd64 (1.5.1-3) ...
Selecting previously unselected package man-db.
Preparing to unpack .../5-man-db_2.9.0-2_amd64.deb ...
Unpacking man-db (2.9.0-2) ...
Selecting previously unselected package libssl1.1:amd64.
Preparing to unpack .../6-libssl1.1_1.1.1d-2_amd64.deb ...
Unpacking libssl1.1:amd64 (1.1.1d-2) ...
Selecting previously unselected package libpython3.7-minimal:amd64.
Preparing to unpack .../7-libpython3.7-minimal_3.7.6-1_amd64.deb ...
Unpacking libpython3.7-minimal:amd64 (3.7.6-1) ...
Selecting previously unselected package libexpat1:amd64.
Preparing to unpack .../8-libexpat1_2.2.9-1_amd64.deb ...
Unpacking libexpat1:amd64 (2.2.9-1) ...
Selecting previously unselected package python3.7-minimal.
Preparing to unpack .../9-python3.7-minimal_3.7.6-1_amd64.deb ...
Unpacking python3.7-minimal (3.7.6-1) ...
Setting up libssl1.1:amd64 (1.1.1d-2) ...
Setting up libpython3.7-minimal:amd64 (3.7.6-1) ...
Setting up libexpat1:amd64 (2.2.9-1) ...
Setting up python3.7-minimal (3.7.6-1) ...
Selecting previously unselected package python3-minimal.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 16696 files and directories currently installed.)
Preparing to unpack .../0-python3-minimal_3.7.5-3_amd64.deb ...
Unpacking python3-minimal (3.7.5-3) ...
Selecting previously unselected package mime-support.
Preparing to unpack .../1-mime-support_3.64_all.deb ...
Unpacking mime-support (3.64) ...
Selecting previously unselected package libmpdec2:amd64.
Preparing to unpack .../2-libmpdec2_2.4.2-2_amd64.deb ...
Unpacking libmpdec2:amd64 (2.4.2-2) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../3-readline-common_8.0-3_all.deb ...
Unpacking readline-common (8.0-3) ...
Selecting previously unselected package libreadline8:amd64.
Preparing to unpack .../4-libreadline8_8.0-3_amd64.deb ...
Unpacking libreadline8:amd64 (8.0-3) ...
Selecting previously unselected package libpython3.7-stdlib:amd64.
Preparing to unpack .../5-libpython3.7-stdlib_3.7.6-1_amd64.deb ...
Unpacking libpython3.7-stdlib:amd64 (3.7.6-1) ...
Selecting previously unselected package python3.7.
Preparing to unpack .../6-python3.7_3.7.6-1_amd64.deb ...
Unpacking python3.7 (3.7.6-1) ...
Selecting previously unselected package libpython3-stdlib:amd64.
Preparing to unpack .../7-libpython3-stdlib_3.7.5-3_amd64.deb ...
Unpacking libpython3-stdlib:amd64 (3.7.5-3) ...
Setting up python3-minimal (3.7.5-3) ...
Selecting previously unselected package python3.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 17157 files and directories currently installed.)
Preparing to unpack .../00-python3_3.7.5-3_amd64.deb ...
Unpacking python3 (3.7.5-3) ...
Selecting previously unselected package sensible-utils.
Preparing to unpack .../01-sensible-utils_0.0.12+nmu1_all.deb ...
Unpacking sensible-utils (0.0.12+nmu1) ...
Selecting previously unselected package libmagic-mgc.
Preparing to unpack .../02-libmagic-mgc_1%3a5.37-6_amd64.deb ...
Unpacking libmagic-mgc (1:5.37-6) ...
Selecting previously unselected package libmagic1:amd64.
Preparing to unpack .../03-libmagic1_1%3a5.37-6_amd64.deb ...
Unpacking libmagic1:amd64 (1:5.37-6) ...
Selecting previously unselected package file.
Preparing to unpack .../04-file_1%3a5.37-6_amd64.deb ...
Unpacking file (1:5.37-6) ...
Selecting previously unselected package gettext-base.
Preparing to unpack .../05-gettext-base_0.19.8.1-10_amd64.deb ...
Unpacking gettext-base (0.19.8.1-10) ...
Selecting previously unselected package libsigsegv2:amd64.
Preparing to unpack .../06-libsigsegv2_2.12-2_amd64.deb ...
Unpacking libsigsegv2:amd64 (2.12-2) ...
Selecting previously unselected package m4.
Preparing to unpack .../07-m4_1.4.18-4_amd64.deb ...
Unpacking m4 (1.4.18-4) ...
Selecting previously unselected package autoconf.
Preparing to unpack .../08-autoconf_2.69-11_all.deb ...
Unpacking autoconf (2.69-11) ...
Selecting previously unselected package autotools-dev.
Preparing to unpack .../09-autotools-dev_20180224.1_all.deb ...
Unpacking autotools-dev (20180224.1) ...
Selecting previously unselected package automake.
Preparing to unpack .../10-automake_1%3a1.16.1-4_all.deb ...
Unpacking automake (1:1.16.1-4) ...
Selecting previously unselected package autopoint.
Preparing to unpack .../11-autopoint_0.19.8.1-10_all.deb ...
Unpacking autopoint (0.19.8.1-10) ...
Selecting previously unselected package libtool.
Preparing to unpack .../12-libtool_2.4.6-11_all.deb ...
Unpacking libtool (2.4.6-11) ...
Selecting previously unselected package dh-autoreconf.
Preparing to unpack .../13-dh-autoreconf_19_all.deb ...
Unpacking dh-autoreconf (19) ...
Selecting previously unselected package libdebhelper-perl.
Preparing to unpack .../14-libdebhelper-perl_12.7.2_all.deb ...
Unpacking libdebhelper-perl (12.7.2) ...
Selecting previously unselected package libarchive-zip-perl.
Preparing to unpack .../15-libarchive-zip-perl_1.67-1_all.deb ...
Unpacking libarchive-zip-perl (1.67-1) ...
Selecting previously unselected package libsub-override-perl.
Preparing to unpack .../16-libsub-override-perl_0.09-2_all.deb ...
Unpacking libsub-override-perl (0.09-2) ...
Selecting previously unselected package libfile-stripnondeterminism-perl.
Preparing to unpack .../17-libfile-stripnondeterminism-perl_1.6.3-1_all.deb ...
Unpacking libfile-stripnondeterminism-perl (1.6.3-1) ...
Selecting previously unselected package dh-strip-nondeterminism.
Preparing to unpack .../18-dh-strip-nondeterminism_1.6.3-1_all.deb ...
Unpacking dh-strip-nondeterminism (1.6.3-1) ...
Selecting previously unselected package libelf1:amd64.
Preparing to unpack .../19-libelf1_0.176-1.1_amd64.deb ...
Unpacking libelf1:amd64 (0.176-1.1) ...
Selecting previously unselected package dwz.
Preparing to unpack .../20-dwz_0.13-5_amd64.deb ...
Unpacking dwz (0.13-5) ...
Selecting previously unselected package libicu63:amd64.
Preparing to unpack .../21-libicu63_63.2-2_amd64.deb ...
Unpacking libicu63:amd64 (63.2-2) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../22-libxml2_2.9.4+dfsg1-8_amd64.deb ...
Unpacking libxml2:amd64 (2.9.4+dfsg1-8) ...
Selecting previously unselected package libcroco3:amd64.
Preparing to unpack .../23-libcroco3_0.6.13-1_amd64.deb ...
Unpacking libcroco3:amd64 (0.6.13-1) ...
Selecting previously unselected package gettext.
Preparing to unpack .../24-gettext_0.19.8.1-10_amd64.deb ...
Unpacking gettext (0.19.8.1-10) ...
Selecting previously unselected package intltool-debian.
Preparing to unpack .../25-intltool-debian_0.35.0+20060710.5_all.deb ...
Unpacking intltool-debian (0.35.0+20060710.5) ...
Selecting previously unselected package po-debconf.
Preparing to unpack .../26-po-debconf_1.0.21_all.deb ...
Unpacking po-debconf (1.0.21) ...
Selecting previously unselected package debhelper.
Preparing to unpack .../27-debhelper_12.7.2_all.deb ...
Unpacking debhelper (12.7.2) ...
Selecting previously unselected package scons.
Preparing to unpack .../28-scons_3.1.2-1_all.deb ...
Unpacking scons (3.1.2-1) ...
Setting up libpipeline1:amd64 (1.5.1-3) ...
Setting up mime-support (3.64) ...
Setting up libmagic-mgc (1:5.37-6) ...
Setting up libarchive-zip-perl (1.67-1) ...
Setting up libdebhelper-perl (12.7.2) ...
Setting up libmagic1:amd64 (1:5.37-6) ...
Setting up gettext-base (0.19.8.1-10) ...
Setting up file (1:5.37-6) ...
Setting up libicu63:amd64 (63.2-2) ...
Setting up autotools-dev (20180224.1) ...
Setting up libsigsegv2:amd64 (2.12-2) ...
Setting up autopoint (0.19.8.1-10) ...
Setting up sensible-utils (0.0.12+nmu1) ...
Setting up libuchardet0:amd64 (0.0.6-3) ...
Setting up libsub-override-perl (0.09-2) ...
Setting up libmpdec2:amd64 (2.4.2-2) ...
Setting up libbsd0:amd64 (0.10.0-1) ...
Setting up libelf1:amd64 (0.176-1.1) ...
Setting up readline-common (8.0-3) ...
Setting up libxml2:amd64 (2.9.4+dfsg1-8) ...
Setting up libfile-stripnondeterminism-perl (1.6.3-1) ...
Setting up libtool (2.4.6-11) ...
Setting up libreadline8:amd64 (8.0-3) ...
Setting up m4 (1.4.18-4) ...
Setting up bsdmainutils (11.1.2+b1) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write)
in auto mode
update-alternatives: using /usr/bin/bsd-from to provide /usr/bin/from (from) in
auto mode
Setting up libcroco3:amd64 (0.6.13-1) ...
Setting up autoconf (2.69-11) ...
Setting up dh-strip-nondeterminism (1.6.3-1) ...
Setting up dwz (0.13-5) ...
Setting up groff-base (1.22.4-4) ...
Setting up automake (1:1.16.1-4) ...
update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake
(automake) in auto mode
Setting up libpython3.7-stdlib:amd64 (3.7.6-1) ...
Setting up gettext (0.19.8.1-10) ...
Setting up man-db (2.9.0-2) ...
Building database of manual pages ...
Setting up intltool-debian (0.35.0+20060710.5) ...
Setting up libpython3-stdlib:amd64 (3.7.5-3) ...
Setting up python3.7 (3.7.6-1) ...
Setting up po-debconf (1.0.21) ...
Setting up python3 (3.7.5-3) ...
Setting up scons (3.1.2-1) ...
Setting up dh-autoreconf (19) ...
Setting up debhelper (12.7.2) ...
Processing triggers for libc-bin (2.29-6) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
Building tag database...
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
apt-utils is already the newest version (1.8.4).
The following NEW packages will be installed:
fakeroot libfakeroot
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/132 kB of archives.
After this operation, 393 kB of additional disk space will be used.
Selecting previously unselected package libfakeroot:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 18808 files and directories currently installed.)
Preparing to unpack .../libfakeroot_1.24-1_amd64.deb ...
Unpacking libfakeroot:amd64 (1.24-1) ...
Selecting previously unselected package fakeroot.
Preparing to unpack .../fakeroot_1.24-1_amd64.deb ...
Unpacking fakeroot (1.24-1) ...
Setting up libfakeroot:amd64 (1.24-1) ...
Setting up fakeroot (1.24-1) ...
update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot
(fakeroot) in auto mode
Processing triggers for man-db (2.9.0-2) ...
Processing triggers for libc-bin (2.29-6) ...
[0mI: Copying back the cached apt archive contents[0m
[0mI: Building the package[0m
[0mI: Running cd /build/create-resources-0.1.3/ && env
PATH="/usr/sbin:/usr/bin:/sbin:/bin" HOME="/nonexistent" dpkg-buildpackage -us
-uc -d[0m
dpkg-buildpackage: info: source package create-resources
dpkg-buildpackage: info: source version 0.1.3-5
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Alessio Treglia <[email protected]>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture amd64
fakeroot debian/rules clean
dh clean
dh: Compatibility levels before 9 are deprecated (level 7 in use)
debian/rules override_dh_auto_clean
make[1]: Entering directory '/build/create-resources-0.1.3'
dh_auto_clean
dh_auto_clean: Compatibility levels before 9 are deprecated (level 7 in use)
rm -f .sconsign.dblite
make[1]: Leaving directory '/build/create-resources-0.1.3'
debian/rules override_dh_clean
make[1]: Entering directory '/build/create-resources-0.1.3'
dh_clean -XSConscript~
dh_clean: Compatibility levels before 9 are deprecated (level 7 in use)
make[1]: Leaving directory '/build/create-resources-0.1.3'
dpkg-source -b .
dpkg-source: info: using source format '3.0 (quilt)'
dpkg-source: info: building create-resources using existing
./create-resources_0.1.3.orig.tar.gz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: building create-resources in
create-resources_0.1.3-5.debian.tar.xz
dpkg-source: info: building create-resources in create-resources_0.1.3-5.dsc
debian/rules build
dh build
dh: Compatibility levels before 9 are deprecated (level 7 in use)
dh_update_autotools_config
fakeroot debian/rules binary
dh binary
dh: Compatibility levels before 9 are deprecated (level 7 in use)
dh_testroot
dh_prep
dh_installdirs
dh_installdirs: Compatibility levels before 9 are deprecated (level 7 in use)
debian/rules override_dh_auto_install
make[1]: Entering directory '/build/create-resources-0.1.3'
scons -Q install
PREFIX=/build/create-resources-0.1.3/debian/create-resources/usr
File "/build/create-resources-0.1.3/SConstruct", line 12
print "Preparing Create Resource Files ..."
^
SyntaxError: Missing parentheses in call to 'print'. Did you mean
print("Preparing Create Resource Files ...")?
make[1]: *** [debian/rules:11: override_dh_auto_install] Error 2
make[1]: Leaving directory '/build/create-resources-0.1.3'
make: *** [debian/rules:4: binary] Error 2
dpkg-buildpackage: error: fakeroot debian/rules binary subprocess returned exit
status 2
[0mI: copying local configuration[0m
[0;31mE: Failed autobuilding of package[0m
[0mI: user script /var/cache/pbuilder/build//304480/tmp/hooks/C10shell
starting[0m
Reading package lists...
Building dependency tree...
Reading state information...
bash is already the newest version (5.0-5).
mc is already the newest version (3:4.8.23-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
W: --force-yes is deprecated, use one of the options starting with --allow
instead.
[0mI: user script /var/cache/pbuilder/build//304480/tmp/hooks/C10shell
finished[0m
[0mI: unmounting /var/cache/debs filesystem[0m
[0mI: unmounting dev/ptmx filesystem[0m
[0mI: unmounting dev/pts filesystem[0m
[0mI: unmounting dev/shm filesystem[0m
[0mI: unmounting proc filesystem[0m
[0mI: unmounting sys filesystem[0m
[0mI: cleaning the build env [0m
[0mI: removing directory /var/cache/pbuilder/build//304480 and its
subdirectories[0m
signature.asc
Description: This is a digitally signed message part
--- End Message ---
--- Begin Message ---
Source: create-resources
Source-Version: 0.1.3-6
Done: Ross Gammon <[email protected]>
We believe that the bug you reported is fixed in the latest version of
create-resources, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Ross Gammon <[email protected]> (supplier of updated create-resources
package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Wed, 08 Apr 2020 12:16:03 +0200
Source: create-resources
Architecture: source
Version: 0.1.3-6
Distribution: unstable
Urgency: medium
Maintainer: Debian Multimedia Maintainers <[email protected]>
Changed-By: Ross Gammon <[email protected]>
Closes: 947556
Changes:
create-resources (0.1.3-6) unstable; urgency=medium
.
[ Ondřej Nový ]
* d/copyright: Change Format URL to correct one
* d/control: Deprecating priority extra as per policy 4.0.1
* d/control: Set Vcs-* to salsa.debian.org
* d/changelog: Remove trailing whitespaces
.
[ Felipe Sateler ]
* Change maintainer address to [email protected]
.
[ Ross Gammon ]
* Add myself to uploaders
* Apply patch to fix FTBFS with Python3 Scons.
Thanks to Reiner Herrmann (Closes: #947556)
* Bump sandards version, no changes required
* Move to latest debhelper-compat level 12, delete compat file
Checksums-Sha1:
586a33fe600827ebc1ab60b7a44d05fd0ae654d0 2052 create-resources_0.1.3-6.dsc
db439fb85a710ee0bae808691c89d7af8aecb83b 5232
create-resources_0.1.3-6.debian.tar.xz
773116da62810453ac2bc37662a895e2a3ea7adf 6438
create-resources_0.1.3-6_amd64.buildinfo
Checksums-Sha256:
99e4a4b4ed44512b4b8c5a6ee723e9fa9ff83e2635529bbe9de8bf5e7dece7ed 2052
create-resources_0.1.3-6.dsc
b13b69409d72468ff88b9c6e3e5c24a668e233d199b8c6c4f095492e5a143728 5232
create-resources_0.1.3-6.debian.tar.xz
62a9101c5ee7b5a152c811f37f9b197227326db23ecaf51250ddb1804b3990e9 6438
create-resources_0.1.3-6_amd64.buildinfo
Files:
4ec3b1a56d8712a9a29bd7602e609de4 2052 graphics optional
create-resources_0.1.3-6.dsc
d9f1ed7a01497c26a4690e1d80b137ab 5232 graphics optional
create-resources_0.1.3-6.debian.tar.xz
ae2d2eb6447123c838f703ff0d0925c4 6438 graphics optional
create-resources_0.1.3-6_amd64.buildinfo
-----BEGIN PGP SIGNATURE-----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=6dHM
-----END PGP SIGNATURE-----
--- End Message ---
_______________________________________________
pkg-multimedia-maintainers mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/pkg-multimedia-maintainers
