Alan,
One step forward 2 steps back :)
wood...@mappy:/u/local/src$ sudo apt-get -t lenny-backports install
libpq5 libpq-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
postgresql-doc-8.4
The following packages will be upgraded:
libpq-dev libpq5
2 upgraded, 0 newly installed, 0 to remove and 91 not upgraded.
Need to get 363kB of archives.
After this operation, 578kB disk space will be freed.
Get:1 http://www.backports.org lenny-backports/main libpq-dev
8.4.3-1~bpo50+1 [228kB]
Get:2 http://www.backports.org lenny-backports/main libpq5
8.4.3-1~bpo50+1 [134kB]
Fetched 363kB in 1s (201kB/s)
(Reading database ... 75002 files and directories currently installed.)
Preparing to replace libpq-dev 8.3.9-0lenny1 (using
.../libpq-dev_8.4.3-1~bpo50+1_amd64.deb) ...
Unpacking replacement libpq-dev ...
Preparing to replace libpq5 8.3.9-0lenny1 (using
.../libpq5_8.4.3-1~bpo50+1_amd64.deb) ...
Unpacking replacement libpq5 ...
Processing triggers for man-db ...
Setting up libpq5 (8.4.3-1~bpo50+1) ...
Setting up libpq-dev (8.4.3-1~bpo50+1) ...
So this part ran ok, and it allowed me to do:
wood...@mappy:/u/local/src$ sudo dpkg -i postgis_1.5.1-1_amd64.deb
Selecting previously deselected package postgis.
(Reading database ... 74995 files and directories currently installed.)
Unpacking postgis (from postgis_1.5.1-1_amd64.deb) ...
Setting up postgis (1.5.1-1) ...
Processing triggers for man-db ...
But this step bombs:
wood...@mappy:/u/local/src$ sudo dpkg -i
postgresql-8.3-postgis_1.5.1-1_amd64.deb
Selecting previously deselected package postgresql-8.3-postgis.
(Reading database ... 75006 files and directories currently installed.)
Unpacking postgresql-8.3-postgis (from
postgresql-8.3-postgis_1.5.1-1_amd64.deb) ...
Setting up postgresql-8.3-postgis (1.5.1-1) ...
Postgis extension not found, something wrong did probably happen
Which comes from:
wood...@mappy:/u/local/src/$ cat debian/postgresql-8.3-postgis.postinst
#!/bin/sh
set -e
# Creates a link for the shared lib in the postgres area
if [ "$1" = "configure" ]; then
if [ -f /usr/lib/postgis/1.5.1/postgres/8.3/lib/postgis-1.4.so
]; then
ln -f
/usr/lib/postgis/1.5.1/postgres/8.3/lib/postgis-1.4.so \
/usr/lib/postgresql/8.3/lib/postgis-1.4.so
else
echo "Postgis extension not found, something wrong did
probably happen"
fi
fi
#DEBHELPER#
exit 0
But we installed:
wood...@mappy:/u/local/src/postgis-1.5.1$ ls
/usr/lib/postgis/1.5.1/postgres/8.3/lib/
postgis-1.5.so
So, I'm looking for where @SOVERSION@ is getting defined, which
appears to be in rules_lenny (which is what I'm using). Using the svn
rules it builds postgis-1.5.so but still fails on the above script.
It looks like I can probably do the link by hand, then try to upgrade
the databases, but I have to run out the door for the weekend, so I'll
tackle this on monday some more.
Thank you all for you help and suggestions.
-Steve
Alan Boudreault wrote:
Hi Stephen,
Just a quick thing you could try: "apt-get install -f" , this should
install the missing dependency and continue the postgis package
installation normally. Be sure you have lenny-backports in you
sources.list because the libpq5 version 8.4 is there. Note that dpkg
will never download and install missing dependencies, it's not its
job. It's the apt-get job. That's why you have to call apt-get to fix
things and continue what dpkg started before. You can also take a
look at the "gdebi" utility. It's a tool to install a .deb file and
it *should* (never used it much) call apt-get itself to solve missing
dependencies.
see also my comments below....
Stephen Woodbridge wrote:
Hi all,
I have just found pbuilder and I'm using it with the pkg-grass
debian package definitions for geos-3.2.0 and postgis-1.5.1 building
packages for lenny. This is all very cool and makes things soo much
easier. I am also using some packages backports.org.
So, I have gotten things setup and have been able to build packages,
but postgis and postgresql-8.3-postgis will not install giving the
following error:
wood...@mappy:/u/local/src$ sudo dpkg -i postgis_1.5.1-1_amd64.deb
[sudo] password for woodbri:
(Reading database ... 75044 files and directories currently installed.)
Preparing to replace postgis 1.5.1-1 (using
postgis_1.5.1-1_amd64.deb) ...
Unpacking replacement postgis ...
dpkg: dependency problems prevent configuration of postgis:
postgis depends on libpq5 (>= 8.4~0cvs20090328); however:
Version of libpq5 on system is 8.3.9-0lenny1.
dpkg: error processing postgis (--install):
dependency problems - leaving unconfigured
Processing triggers for man-db ...
Errors were encountered while processing:
postgis
I have attached the postgis_1.5.1-1_amd64.build.gz from the pdebuild.
I think this might be because the control_lenny file has BOTH
postgresql-server-dev-8.3, postgresql-server-dev-8.4
as Build-Depends for postgis.
That is ok, the package is made to build the postgis extension for
both versions.
Would this not then require BOTH
libpq5 8.4~0cvs20090328 from postgresql-8.4
libpq5 8.3.9-0lenny1 from postgresql-8.3
to be part of the dependencies, probably with the later one winning
or whatever?
No. libpq5 is the library that allows user programs to communicate
with a postgresql server. The version of libpq5 >=8.4 is compatible
to communicate with servers from PostgreSQL 8.2 or later. So it's all
right that the postgis package has libpq5 >=8.4.x as dependency.
Any ideas how to fix this? Does the control file need to be split
into two files one for postgresql-8.3 and one for postgresql-8.4?
would the rules file need to changes also or instead of the control
file?
As I said, the control and rule files are ok and build the extension
for postgresql 8.3 and 8.4.
I've put a lot of time and effort into trying to resolve this, but I
just don't know that much about building debian packages. Reall need
to guidance and help on this one.
Best regards,
-Steve
------------------------------------------------------------------------
_______________________________________________
Pkg-grass-devel mailing list
Pkg-grass-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/pkg-grass-devel
Hope this help,
regards,
Alan
