Hi again One Question i downloaded again the file zip and now I can run the configure without errors. =)
But when I run "make test" I receive this error make test +-----------------------------------------------------------+ | ! ERROR ! | | The test-suite requires that proc_open() is available. | | Please check if you disabled it in php.ini. | +-----------------------------------------------------------+ I the first time the I install php in this server, and I dont have the php.ini in the /usr/local/php/etc/ Is this normal? I think this is ok, I never will can, do this test because this condition. Then "I did make install" Please confirm this error, if is normal. Thanks -- Angel 2010/3/8 Angel Motta <angelmo...@gmail.com> > Ohhh Christopher > I think you have the reason. When I was trying to unzipping again I see > this: > [r...@zimbra instantclient]# unzip > instantclient-basic-linux32-11.2.0.1.zip > Archive: instantclient-basic-linux32-11.2.0.1.zip > inflating: instantclient_11_2/adrci > inflating: instantclient_11_2/BASIC_README > inflating: instantclient_11_2/genezi > * inflating: instantclient_11_2/libclntsh.so.11.1 bad CRC 05bc2fea > (should be 1621b100)* > inflating: instantclient_11_2/libnnz11.so > inflating: instantclient_11_2/libocci.so.11.1 > inflating: instantclient_11_2/libociei.so > inflating: instantclient_11_2/libocijdbc11.so > inflating: instantclient_11_2/ojdbc5.jar > inflating: instantclient_11_2/ojdbc6.jar > inflating: instantclient_11_2/xstreams.jar > > I think the zip file is corrupted. I am downloading this file again. > I will post the results of this. > > -- > Angel > > 2010/3/8 Christopher Jones <christopher.jo...@oracle.com> > >> >> The error "/opt/instantclient/libclntsh.so: file not recognized: File >> format not recognized" still makes me think there is an installation >> issue. >> >> Make the libclntsh symbolic link points to the right file. See >> http://www.oracle.com/technology/pub/notes/technote_php_instant.html >> And/or try unzipping the 32 bit package again >> >> I just built PHP 5.2.13 on Oracle EL 5.4 using effectively the same >> options as you. It built OK. My configure line was: >> >> ./configure --prefix=$HOME/phptmp --with-xmlrpc >> --with-apxs2=$HOME/apache22/bin/apxs --with-gd=/usr/ --with-jpeg-dir=/usr >> --with-png-dir=/usr --with-freetype-dir=/usr --with-xpm-dir=/usr >> --with-zlib=/usr --with-oci8=instantclient,$HOME/instantclient_11_2 >> --with-pdo-oci=instantclient,$HOME/instantclient_11_2,11.2 --with-snmp=/usr/ >> --with-openssl-dir=/usr --with-iconv --with-curl=/usr --with-curlwrappers >> --with-libxml-dir=/usr --with-gettext=/usr --enable-sigchild --enable-libxml >> --enable-soap >> >> Chris >> >> >> Angel Motta wrote: >> > Sorry for send twice. >> > I forgot php version and apache >> > php-5.2.8 >> > apache: httpd-2.2.12 >> > >> > 2010/3/8 Angel Motta <angelmo...@gmail.com <mailto:angelmo...@gmail.com >> >> >> >> > >> > Hi Christopher and Thanks for your assistance >> > >> > I am using: >> > RHEL 5.3 - 32bit platform >> > instantclient-basic-linux32-11.2.0.1.zip >> > instantclient-sdk-linux32-11.2.0.1.zip >> > >> > I want to install oci8 support with snmp. When I enable snmp-support >> > (that is my objective) in the configure I get this error: >> > >> > ./configure --prefix=/usr/local/php --with-xmlrpc >> > --with-apxs2=/usr/local/apache2/bin/apxs >> > --with-config-file-path=/usr/local/php/etc --with-gd=/usr/ >> > --with-jpeg-dir=/usr --with-png-dir=/usr --with-freetype-dir=/usr >> > --with-xpm-dir=/usr --with-zlib=/usr >> > --with-oci8=instantclient,/opt/instantclient >> > --with-pdo-oci=instantclient,/opt/instantclient,11.1 >> > --with-snmp=/usr/ --with-openssl-dir=/usr >> > --with-iconv=/usr/local/lib --with-curl=/usr --with-curlwrappers >> > --with-libxml-dir=/usr --with-gettext=/usr --enable-sigchild >> > --enable-libxml --enable-soap >> > >> > checking for SNMP support... yes >> > checking OpenSSL dir for SNMP... /usr >> > checking whether to enable UCD SNMP hack... yes >> > checking for snmp_parse_oid in -lnetsnmp... no >> > checking for init_snmp in -lnetsnmp... no >> > configure: error: SNMP sanity check failed. Please check config.log >> > for more information. >> > >> > #> vi config.log >> > Start with some like: >> > configure:2165: error: '__CYGWIN32__' undeclared (first use in this >> > function) >> > configure:2194: error: '__MINGW32__' undeclared (first use in this >> > function) >> > >> > End with some of this: >> > >> > /opt/instantclient/libclntsh.so: file not recognized: File format >> > not recognized >> > 2017 collect2: ld returned 1 exit status >> > 2018 configure: failed program was: >> > 2019 #line 88940 "configure" >> > 2020 #include "confdefs.h" >> > 2021 /* Override any gcc2 internal prototype to avoid an error. */ >> > 2022 /* We use char because int might match the return type of a >> gcc2 >> > 2023 builtin and then its argument prototype would still apply. >> */ >> > 2024 char init_snmp(); >> > >> > >> > Thanks >> > -- >> > Angel >> > >> > 2010/3/8 Christopher Jones <christopher.jo...@oracle.com >> > <mailto:christopher.jo...@oracle.com>> >> >> > >> > >> > What platform? What PHP version? >> > Are you doing something like using 32 bit instantclient on a 64 >> > bit machine? >> > >> > Chris >> > >> > >> > Angel Motta wrote: >> > >> > Hi List >> > Is my first time that I write to this list. >> > I am having problems to compile php with oci support. >> > >> > I run this: >> > ./configure --prefix=/usr/local/php --with-xmlrpc >> > --with-apxs2=/usr/local/apache2/bin/apxs >> > --with-config-file-path=/usr/local/php/etc --with-gd=/usr/ >> > --with-jpeg-dir=/usr --with-png-dir=/usr >> > --with-freetype-dir=/usr --with-xpm-dir=/usr >> > --with-zlib=/usr >> > --with-oci8=instantclient,/opt/instantclient >> > --with-pdo-oci=instantclient,/opt/instantclient,11.1 >> > --with-openssl-dir=/usr --with-iconv=/usr/local >> > --with-curl=/usr --with-curlwrappers --with-libxml-dir=/usr >> > --with-gettext=/usr --enable-sigchild --enable-libxml >> > --enable-soap >> > >> > And I receive alert at finish of ./configure and I see the >> > debug.log with this at the end: >> > conftest.c: In function 'main': >> > conftest.c:3: warning: incompatible implicit declaration of >> > built-in function 'exit' >> > /opt/instantclient/libclntsh.so: file not recognized: File >> > format not recognized >> > collect2: ld returned 1 exit status >> > >> > >> > Thanks for your assistance >> > -- >> > Angel >> > >> > >> > -- >> > Email: christopher.jo...@oracle.com >> > <mailto:christopher.jo...@oracle.com> Tel: +1 650 506 8630 >> >> > Blog: http://blogs.oracle.com/opal/ Free PHP Book: >> > http://tinyurl.com/UGPOM >> > >> > >> > >> > >> > -- >> > Atte >> > Angel Motta Paz >> > >> > >> > >> > >> > -- >> > Atte >> > Angel Motta Paz >> >> -- >> Email: christopher.jo...@oracle.com Tel: +1 650 506 8630 >> Blog: http://blogs.oracle.com/opal/ Free PHP Book: >> http://tinyurl.com/UGPOM >> > > > > -- > Atte > Angel Motta Paz > -- Atte Angel Motta Paz
