Hello,
I have installed php3 in my machine.To make php connection with mysql what are the lines to be comment out in apache conf file.Here i am attaching the some parts of apache conf file -Uma
## ## httpd.conf -- Apache HTTP server configuration file ## # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://www.apache.org/docs/> for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # After this file is processed, the server will look for and process # /usr/conf/srm.conf and then /usr/conf/access.conf # unless you have overridden these with ResourceConfig and/or # AccessConfig directives here. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "/usr/local/apache" will be interpreted by the # server as "/usr/local/apache/logs/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerType is either inetd, or standalone. Inetd mode is only supported on # Unix platforms. # ServerType standalone # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/httpd" # # The LockFile directive sets the path to the lockfile used when Apache # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at # its default value. The main reason for changing it is if the logs # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL # DISK. The PID of the main server process is automatically appended to # the filename. # LockFile /var/lock/httpd.lock # # PidFile: The file in which the server should record its process # identification number when it starts. # PidFile /var/run/httpd.pid # # ScoreBoardFile: File used to store internal server process information. # Not all architectures require this. But if yours does (you'll know because # this file will be created when you run Apache) then you *must* ensure that # no two invocations of Apache share the same scoreboard file. # ScoreBoardFile /var/run/httpd.scoreboard # # In the standard configuration, the server will process this file, # srm.conf, and access.conf in that order. The latter two files are # now distributed empty, as it is recommended that all directives # be kept in a single file for simplicity. The commented-out values # below are the built-in defaults. You can have the server ignore # these files altogether by using "/dev/null" (for Unix) or # "nul" (for Win32) for the arguments to the directives. # #ResourceConfig conf/srm.conf #AccessConfig conf/access.conf # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 # # Server-pool size regulation. Rather than making you guess how many # server processes you need, Apache dynamically adapts to the load it # sees --- that is, it tries to maintain enough server processes to # handle the current load, plus a few spare servers to handle transient # load spikes (e.g., multiple simultaneous requests from a single # Netscape browser). # # It does this by periodically checking how many servers are waiting # for a request. If there are fewer than MinSpareServers, it creates # a new spare. If there are more than MaxSpareServers, some of the # spares die off. The default values are probably OK for most sites. # MinSpareServers 5 MaxSpareServers 20 # # Number of servers to start initially --- should be a reasonable ballpark # figure. # StartServers 8 # # Limit on total number of servers running, i.e., limit on the number # of clients who can simultaneously connect --- if this limit is ever # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. # It is intended mainly as a brake to keep a runaway server from taking # the system with it as it spirals down... # MaxClients 150 # # MaxRequestsPerChild: the number of requests each child process is # allowed to process before the child dies. The child will exit so # as to avoid problems after prolonged use when Apache (and maybe the # libraries it uses) leak memory or other resources. On most systems, this # isn't really needed, but a few (such as Solaris) do have notable leaks # in the libraries. For these platforms, set to something like 10000 # or so; a setting of 0 means unlimited. # # NOTE: This value does not include keepalive requests after the initial # request per connection. For example, if a child process handles # an initial request and 10 subsequent "keptalive" requests, it # would only count as 1 request towards this limit. # MaxRequestsPerChild 100 # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, in addition to the default. See also the <VirtualHost> # directive. # #Listen 3000 #Listen 12.34.56.78:80 Listen 80 # # BindAddress: You can support virtual hosts with this option. This directive # is used to tell the server which IP address to listen to. It can either # contain "*", an IP address, or a fully qualified Internet domain name. # See also the <VirtualHost> and Listen directives. # #BindAddress * # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Please read the file README.DSO in the Apache 1.3 distribution for more # details about the DSO mechanism and run `httpd -l' for the list of already # built-in (statically linked and thus always available) modules in your httpd # binary. # # Note: The order is which modules are loaded is important. Don't change # the order below without expert advice. # # Example: # LoadModule foo_module modules/mod_foo.so #LoadModule mmap_static_module modules/mod_mmap_static.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule env_module modules/mod_env.so LoadModule config_log_module modules/mod_log_config.so LoadModule agent_log_module modules/mod_log_agent.so LoadModule referer_log_module modules/mod_log_referer.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule mime_module modules/mod_mime.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule status_module modules/mod_status.so LoadModule info_module modules/mod_info.so LoadModule includes_module modules/mod_include.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule dir_module modules/mod_dir.so LoadModule cgi_module modules/mod_cgi.so LoadModule asis_module modules/mod_asis.so LoadModule imap_module modules/mod_imap.so LoadModule action_module modules/mod_actions.so #LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule access_module modules/mod_access.so LoadModule auth_module modules/mod_auth.so LoadModule anon_auth_module modules/mod_auth_anon.so LoadModule db_auth_module modules/mod_auth_db.so #LoadModule dbm_auth_module modules/mod_auth_dbm.so #LoadModule auth_ldap_module modules/mod_auth_ldap.so #LoadModule digest_module modules/mod_digest.so #LoadModule proxy_module modules/libproxy.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule headers_module modules/mod_headers.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule example_module modules/mod_example.so #LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule bandwidth_module modules/mod_bandwidth.so #LoadModule put_module modules/mod_put.so #LoadModule throttle_module modules/mod_throttle.so #LoadModule define_module modules/mod_define.so <IfDefine HAVE_PERL> LoadModule perl_module modules/libperl.so </IfDefine> <IfDefine HAVE_PHP> LoadModule php_module modules/mod_php.so </IfDefine> <IfDefine HAVE_PHP3> LoadModule php3_module modules/libphp3.so LoadModule php4_module modules/libphp4.so </IfDefine> <IfDefine HAVE_PHP4> LoadModule php4_module modules/libphp4.so </IfDefine> <IfDefine HAVE_DAV> LoadModule dav_module modules/libdav.so </IfDefine> <IfDefine HAVE_ROAMING> LoadModule roaming_module modules/mod_roaming.so </IfDefine> <IfDefine HAVE_SSL> LoadModule ssl_module modules/libssl.so </IfDefine> # Reconstruction of the complete module list from all available modules # (static and shared ones) to achieve correct module execution order. # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] ClearModuleList #AddModule mod_mmap_static.c AddModule mod_vhost_alias.c AddModule mod_env.c AddModule mod_log_config.c AddModule mod_log_agent.c AddModule mod_log_referer.c #AddModule mod_mime_magic.c AddModule mod_mime.c AddModule mod_negotiation.c AddModule mod_status.c AddModule mod_info.c AddModule mod_include.c AddModule mod_autoindex.c AddModule mod_dir.c AddModule mod_cgi.c AddModule mod_asis.c AddModule mod_imap.c AddModule mod_actions.c #AddModule mod_speling.c AddModule mod_userdir.c AddModule mod_alias.c AddModule mod_rewrite.c AddModule mod_access.c AddModule mod_auth.c AddModule mod_auth_anon.c AddModule mod_auth_db.c #AddModule mod_digest.c #AddModule mod_proxy.c #AddModule mod_cern_meta.c AddModule mod_expires.c AddModule mod_headers.c #AddModule mod_usertrack.c #AddModule mod_example.c #AddModule mod_unique_id.c AddModule mod_so.c AddModule mod_setenvif.c #AddModule mod_bandwidth.c #AddModule mod_put.c <IfDefine HAVE_PERL> AddModule mod_perl.c </IfDefine> <IfDefine HAVE_PHP> AddModule mod_php.c </IfDefine> <IfDefine HAVE_PHP3> AddModule mod_php3.c AddModule mod_php4.c </IfDefine> <IfDefine HAVE_PHP4> AddModule mod_php4.c </IfDefine> <IfDefine HAVE_DAV> AddModule mod_dav.c </IfDefine> <IfDefine HAVE_ROAMING> AddModule mod_roaming.c </IfDefine> <IfDefine HAVE_SSL> AddModule mod_ssl.c </IfDefine> # # ExtendedStatus: controls whether Apache will generate "full" status # information (ExtendedStatus On) or just basic information (ExtendedStatus # Off) when the "server-status" handler is called. The default is Off. # #ExtendedStatus On ### Section 2: 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # If your ServerType directive (set earlier in the 'Global Environment' # section) is set to "inetd", the next few directives don't have any # effect since their settings are defined by the inetd configuration. # Skip ahead to the ServerAdmin directive. # # # Port: The port to which the standalone server listens. For # ports < 1023, you will need httpd to be run as root initially. # Port 80 # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # . On SCO (ODT 3) use "User nouser" and "Group nogroup". # . On HPUX you may not be able to use shared memory as nobody, and the # suggested workaround is to create a user www and use that user. # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) # when the value of (unsigned)Group is above 60000; # don't use Group nobody on these systems! # User apache Group apache # <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # The following is for PHP4 (conficts with PHP/FI, below): #<IfModule mod_php4.c> # AddType application/x-httpd-php .php4 .php3 .phtml .php # AddType application/x-httpd-php-source .phps #</IfModule> AddType application/x-httpd-php .php # The following is for PHP3: <IfModule mod_php4.c> AddType application/x-httpd-php .php </IfModule> #--------- <IfModule mod_php3.c> AddType application/x-httpd-php3 .php3 AddType application/x-httpd-php3-source .phps </IfModule> #--------- # The following is for PHP/FI (PHP2): <IfModule mod_php.c> AddType application/x-httpd-php .phtml </IfModule> AddType application/x-tar .tgz # # AddHandler: allows you to map certain file extensions to "handlers", # actions unrelated to filetype. These can be either built into the server # or added with the Action command (see below) # # If you want to use server side includes, or CGI outside # ScriptAliased directories, uncomment the following lines. # # To use CGI scripts: # #AddHandler cgi-script .cgi # # To use server-parsed HTML files # AddType text/html .shtml AddHandler server-parsed .shtml # # Uncomment the following line to enable Apache's send-asis HTTP file # feature # #AddHandler send-as-is asis # # If you wish to use server-parsed imagemap files, use # AddHandler imap-file map # # To enable type maps, you might want to use # #AddHandler type-map var # # Action: lets you define media types that will execute a script whenever # a matching file is called. This eliminates the need for repeated URL # pathnames for oft-used CGI file processors. # Format: Action media/type /cgi-script/location # Format: Action handler-name /cgi-script/location # # # MetaDir: specifies the name of the directory in which Apache can find # meta information files. These files contain additional HTTP headers # to include when sending the document # #MetaDir .web # # MetaSuffix: specifies the file name suffix for the file containing the # meta information. # #MetaSuffix .meta # # Customizable error response (Apache style) # these come in three flavors # # 1) plain text #ErrorDocument 500 "The server made a boo boo. # n.b. the (") marks it as text, it does not get output # # 2) local redirects #ErrorDocument 404 /missing.html # to redirect to local URL /missing.html #ErrorDocument 404 /cgi-bin/missing_handler.pl # N.B.: You can redirect to a script or a document using server-side-includes. # # 3) external redirects #ErrorDocument 402 http://some.other_server.com/subscription_info.html # N.B.: Many of the environment variables associated with the original # request will *not* be available to such a script. # # The following directives modify normal HTTP response behavior. # The first directive disables keepalive for Netscape 2.x and browsers that # spoof it. There are known problems with these browser implementations. # The second directive is for Microsoft Internet Explorer 4.0b2 # which has a broken HTTP/1.1 implementation and does not properly # support keepalive when it is used on 301 or 302 (redirect) responses. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 # # The following directive disables HTTP/1.1 responses to browsers which # are in violation of the HTTP/1.0 spec by not being able to grok a # basic 1.1 response. # BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # If the perl module is installed, this will be enabled. <IfModule mod_perl.c> Alias /perl/ /home/httpd/perl/ <Location /perl> SetHandler perl-script PerlHandler Apache::Registry Options +ExecCGI </Location> </IfModule> # # Allow http put (such as Netscape Gold's publish feature) # Use htpasswd to generate /etc/httpd/conf/passwd. # You must unremark these two lines at the top of this file as well: #LoadModule put_module modules/mod_put.so #AddModule mod_put.c # #Alias /upload /tmp #<Location /upload> # EnablePut On # AuthType Basic # AuthName Temporary # AuthUserFile /etc/httpd/conf/passwd # EnableDelete Off # umask 007 # <Limit PUT> # require valid-user # </Limit> #</Location> # # Allow server status reports, with the URL of http://servername/server-status # Change the ".your_domain.com" to match your domain to enable. # #<Location /server-status> # SetHandler server-status # Order deny,allow # Deny from all # Allow from .your_domain.com #</Location> # # Allow remote server configuration reports, with the URL of # http://servername/server-info (requires that mod_info.c be loaded). # Change the ".your_domain.com" to match your domain to enable. # #<Location /server-info> # SetHandler server-info # Order deny,allow # Deny from all # Allow from .your_domain.com #</Location> # Allow access to local system documentation from localhost Alias /doc/ /usr/doc/ <Location /doc> order deny,allow deny from all allow from localhost Options Indexes FollowSymLinks </Location> # # There have been reports of people trying to abuse an old bug from pre-1.1 # days. This bug involved a CGI script distributed as a part of Apache. # By uncommenting these lines you can redirect these attacks to a logging # script on phf.apache.org. Or, you can record them yourself, using the script # support/phf_abuse_log.cgi. # #<Location /cgi-bin/phf*> # Deny from all # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi #</Location> # # Proxy Server directives. Uncomment the following lines to # enable the proxy server: # #<IfModule mod_proxy.c> #ProxyRequests On # #<Directory proxy:*> # Order deny,allow # Deny from all # Allow from .your_domain.com #</Directory> # # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block # #ProxyVia On # # To enable the cache as well, edit and uncomment the following lines: # (no cacheing without CacheRoot) # #CacheRoot "/var/cache/httpd" #CacheSize 5 #CacheGcInterval 4 #CacheMaxExpire 24 #CacheLastModifiedFactor 0.1 #CacheDefaultExpire 1 #NoCache a_domain.com another_domain.edu joes.garage_sale.com #</IfModule> # End of proxy directives.
-- PHP General Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
