I wrote: > This patch is not complete, because I didn't look at changing > the contrib modules, and grep says at least some of them are using > contsel for non-geometric data types. But I thought I'd put it up > for discussion at this stage.
Hearing nothing, I went ahead and hacked on the contrib code. The attached 0002 updates hstore, ltree, and pg_trgm to get them out of using contsel/contjoinsel for anything. (0001 is the same patch I posted before.) In ltree, I noted that < <= >= > were using contsel even though those are part of a btree opclass, meaning they could perfectly well use scalarltsel and friends. So now they do. Everything else now uses matchsel/matchjoinsel, leaving ltreeparentsel as an unused backward-compatibility feature. I didn't think that the default selectivity in ltreeparentsel was particularly sane, so having those operators use their own selectivity logic instead of using matchsel like everything else seemed pointless (and certainly pairing a custom ltreeparentsel with contjoinsel isn't something to encourage). In pg_trgm, the change of default selectivity estimate causes one plan to change, but I think that's fine; looking at the data hidden by COSTS OFF shows the new estimate is closer to reality anyway. (That test is meant to exercise some gist consistent-function logic, which it still does, so no worries there.) The cube and seg extensions still make significant use of contsel and the other geometric estimator stubs. Although we could in principle change those operators to use matchsel, I'm hesitant to do so without closer analysis. The sort orderings imposed by their default btree opclasses correlate strongly with cube/seg size, which is related to overlap/containment outcomes, so I'm not sure that the histogram entries would provide a plausibly random sample for this purpose. So those modules are not touched here. There are a few other random uses of geometric join estimators paired with non-geometric restriction estimators, including these in the core core: @>(anyrange,anyelement) | range_contains_elem | rangesel | contjoinsel @>(anyrange,anyrange) | range_contains | rangesel | contjoinsel <@(anyelement,anyrange) | elem_contained_by_range | rangesel | contjoinsel <@(anyrange,anyrange) | range_contained_by | rangesel | contjoinsel &&(anyrange,anyrange) | range_overlaps | rangesel | areajoinsel plus the @@ and ~~ operators in intarray. While this is ugly, it's probably not worth changing until somebody creates non-stub join selectivity code that will work for these cases. regards, tom lane
diff --git a/contrib/ltree/ltree_op.c b/contrib/ltree/ltree_op.c index 070868f..2791037 100644 --- a/contrib/ltree/ltree_op.c +++ b/contrib/ltree/ltree_op.c @@ -559,8 +559,6 @@ ltree2text(PG_FUNCTION_ARGS) } -#define DEFAULT_PARENT_SEL 0.001 - /* * ltreeparentsel - Selectivity of parent relationship for ltree data types. */ @@ -571,101 +569,12 @@ ltreeparentsel(PG_FUNCTION_ARGS) Oid operator = PG_GETARG_OID(1); List *args = (List *) PG_GETARG_POINTER(2); int varRelid = PG_GETARG_INT32(3); - VariableStatData vardata; - Node *other; - bool varonleft; double selec; - /* - * If expression is not variable <@ something or something <@ variable, - * then punt and return a default estimate. - */ - if (!get_restriction_variable(root, args, varRelid, - &vardata, &other, &varonleft)) - PG_RETURN_FLOAT8(DEFAULT_PARENT_SEL); - - /* - * If the something is a NULL constant, assume operator is strict and - * return zero, ie, operator will never return TRUE. - */ - if (IsA(other, Const) && - ((Const *) other)->constisnull) - { - ReleaseVariableStats(vardata); - PG_RETURN_FLOAT8(0.0); - } - - if (IsA(other, Const)) - { - /* Variable is being compared to a known non-null constant */ - Datum constval = ((Const *) other)->constvalue; - FmgrInfo contproc; - double mcvsum; - double mcvsel; - double nullfrac; - int hist_size; - - fmgr_info(get_opcode(operator), &contproc); - - /* - * Is the constant "<@" to any of the column's most common values? - */ - mcvsel = mcv_selectivity(&vardata, &contproc, constval, varonleft, - &mcvsum); - - /* - * If the histogram is large enough, see what fraction of it the - * constant is "<@" to, and assume that's representative of the - * non-MCV population. Otherwise use the default selectivity for the - * non-MCV population. - */ - selec = histogram_selectivity(&vardata, &contproc, - constval, varonleft, - 10, 1, &hist_size); - if (selec < 0) - { - /* Nope, fall back on default */ - selec = DEFAULT_PARENT_SEL; - } - else if (hist_size < 100) - { - /* - * For histogram sizes from 10 to 100, we combine the histogram - * and default selectivities, putting increasingly more trust in - * the histogram for larger sizes. - */ - double hist_weight = hist_size / 100.0; - - selec = selec * hist_weight + - DEFAULT_PARENT_SEL * (1.0 - hist_weight); - } - - /* In any case, don't believe extremely small or large estimates. */ - if (selec < 0.0001) - selec = 0.0001; - else if (selec > 0.9999) - selec = 0.9999; - - if (HeapTupleIsValid(vardata.statsTuple)) - nullfrac = ((Form_pg_statistic) GETSTRUCT(vardata.statsTuple))->stanullfrac; - else - nullfrac = 0.0; - - /* - * Now merge the results from the MCV and histogram calculations, - * realizing that the histogram covers only the non-null values that - * are not listed in MCV. - */ - selec *= 1.0 - nullfrac - mcvsum; - selec += mcvsel; - } - else - selec = DEFAULT_PARENT_SEL; - - ReleaseVariableStats(vardata); - - /* result should be in range, but make sure... */ - CLAMP_PROBABILITY(selec); + /* Use generic restriction selectivity logic, with default 0.001. */ + selec = generic_restriction_selectivity(root, operator, + args, varRelid, + 0.001); PG_RETURN_FLOAT8((float8) selec); } diff --git a/doc/src/sgml/xoper.sgml b/doc/src/sgml/xoper.sgml index 132056f..610545a 100644 --- a/doc/src/sgml/xoper.sgml +++ b/doc/src/sgml/xoper.sgml @@ -283,6 +283,18 @@ column OP constant </para> <para> + Another useful built-in selectivity estimation function + is <function>matchsel</function>, which will work for almost any + binary operator, if standard MCV and/or histogram statistics are + collected for the input data type(s). Its default estimate is set to + twice the default estimate used in <function>eqsel</function>, making + it most suitable for comparison operators that are somewhat less + strict than equality. (Or you could call the + underlying <function>generic_restriction_selectivity</function> + function, providing a different default estimate.) + </para> + + <para> There are additional selectivity estimation functions designed for geometric operators in <filename>src/backend/utils/adt/geo_selfuncs.c</filename>: <function>areasel</function>, <function>positionsel</function>, and <function>contsel</function>. At this writing these are just stubs, but you might want @@ -319,6 +331,7 @@ table1.column1 OP table2.column2 <member><function>scalarlejoinsel</function> for <literal><=</literal></member> <member><function>scalargtjoinsel</function> for <literal>></literal></member> <member><function>scalargejoinsel</function> for <literal>>=</literal></member> + <member><function>matchjoinsel</function> for generic matching operators</member> <member><function>areajoinsel</function> for 2D area-based comparisons</member> <member><function>positionjoinsel</function> for 2D position-based comparisons</member> <member><function>contjoinsel</function> for 2D containment-based comparisons</member> diff --git a/src/backend/utils/adt/selfuncs.c b/src/backend/utils/adt/selfuncs.c index 0be26fe..2e68338 100644 --- a/src/backend/utils/adt/selfuncs.c +++ b/src/backend/utils/adt/selfuncs.c @@ -829,6 +829,132 @@ histogram_selectivity(VariableStatData *vardata, FmgrInfo *opproc, } /* + * generic_restriction_selectivity - Selectivity for almost anything + * + * This function estimates selectivity for operators that we don't have any + * special knowledge about, but are on data types that we collect standard + * MCV and/or histogram statistics for. (Additional assumptions are that + * the operator is strict and immutable, or at least stable.) + * + * If we have "VAR OP CONST" or "CONST OP VAR", selectivity is estimated by + * applying the operator to each element of the column's MCV and/or histogram + * stats, and merging the results using the assumption that the histogram is + * a reasonable random sample of the column's non-MCV population. Note that + * if the operator's semantics are related to the histogram ordering, this + * might not be such a great assumption; other functions such as + * scalarineqsel() are probably a better match in such cases. + * + * Otherwise, fall back to the default selectivity provided by the caller. + */ +double +generic_restriction_selectivity(PlannerInfo *root, Oid operator, + List *args, int varRelid, + double default_selectivity) +{ + double selec; + VariableStatData vardata; + Node *other; + bool varonleft; + + /* + * If expression is not variable OP something or something OP variable, + * then punt and return the default estimate. + */ + if (!get_restriction_variable(root, args, varRelid, + &vardata, &other, &varonleft)) + return default_selectivity; + + /* + * If the something is a NULL constant, assume operator is strict and + * return zero, ie, operator will never return TRUE. + */ + if (IsA(other, Const) && + ((Const *) other)->constisnull) + { + ReleaseVariableStats(vardata); + return 0.0; + } + + if (IsA(other, Const)) + { + /* Variable is being compared to a known non-null constant */ + Datum constval = ((Const *) other)->constvalue; + FmgrInfo opproc; + double mcvsum; + double mcvsel; + double nullfrac; + int hist_size; + + fmgr_info(get_opcode(operator), &opproc); + + /* + * Calculate the selectivity for the column's most common values. + */ + mcvsel = mcv_selectivity(&vardata, &opproc, constval, varonleft, + &mcvsum); + + /* + * If the histogram is large enough, see what fraction of it matches + * the query, and assume that's representative of the non-MCV + * population. Otherwise use the default selectivity for the non-MCV + * population. + */ + selec = histogram_selectivity(&vardata, &opproc, + constval, varonleft, + 10, 1, &hist_size); + if (selec < 0) + { + /* Nope, fall back on default */ + selec = default_selectivity; + } + else if (hist_size < 100) + { + /* + * For histogram sizes from 10 to 100, we combine the histogram + * and default selectivities, putting increasingly more trust in + * the histogram for larger sizes. + */ + double hist_weight = hist_size / 100.0; + + selec = selec * hist_weight + + default_selectivity * (1.0 - hist_weight); + } + + /* In any case, don't believe extremely small or large estimates. */ + if (selec < 0.0001) + selec = 0.0001; + else if (selec > 0.9999) + selec = 0.9999; + + /* Don't forget to account for nulls. */ + if (HeapTupleIsValid(vardata.statsTuple)) + nullfrac = ((Form_pg_statistic) GETSTRUCT(vardata.statsTuple))->stanullfrac; + else + nullfrac = 0.0; + + /* + * Now merge the results from the MCV and histogram calculations, + * realizing that the histogram covers only the non-null values that + * are not listed in MCV. + */ + selec *= 1.0 - nullfrac - mcvsum; + selec += mcvsel; + } + else + { + /* Comparison value is not constant, so we can't do anything */ + selec = default_selectivity; + } + + ReleaseVariableStats(vardata); + + /* result should be in range, but make sure... */ + CLAMP_PROBABILITY(selec); + + return selec; +} + +/* * ineq_histogram_selectivity - Examine the histogram for scalarineqsel * * Determine the fraction of the variable's histogram population that @@ -2916,6 +3042,40 @@ fail: /* + * matchsel -- generic matching-operator selectivity support + * + * Use these for any operators that (a) are on data types for which we collect + * standard statistics, and (b) have behavior for which the default estimate + * of 2*DEFAULT_EQ_SEL is sane. Typically that is good for match-like + * operators. + */ + +Datum +matchsel(PG_FUNCTION_ARGS) +{ + PlannerInfo *root = (PlannerInfo *) PG_GETARG_POINTER(0); + Oid operator = PG_GETARG_OID(1); + List *args = (List *) PG_GETARG_POINTER(2); + int varRelid = PG_GETARG_INT32(3); + double selec; + + /* Use generic restriction selectivity logic. */ + selec = generic_restriction_selectivity(root, operator, + args, varRelid, + 2 * DEFAULT_EQ_SEL); + + PG_RETURN_FLOAT8((float8) selec); +} + +Datum +matchjoinsel(PG_FUNCTION_ARGS) +{ + /* Just punt, for the moment. */ + PG_RETURN_FLOAT8(2 * DEFAULT_EQ_SEL); +} + + +/* * Helper routine for estimate_num_groups: add an item to a list of * GroupVarInfos, but only if it's not known equal to any of the existing * entries. diff --git a/src/include/catalog/pg_operator.dat b/src/include/catalog/pg_operator.dat index 7c135da..6c9bbb3 100644 --- a/src/include/catalog/pg_operator.dat +++ b/src/include/catalog/pg_operator.dat @@ -3016,18 +3016,18 @@ { oid => '3693', descr => 'contains', oprname => '@>', oprleft => 'tsquery', oprright => 'tsquery', oprresult => 'bool', oprcom => '<@(tsquery,tsquery)', - oprcode => 'tsq_mcontains', oprrest => 'contsel', oprjoin => 'contjoinsel' }, + oprcode => 'tsq_mcontains', oprrest => 'matchsel', oprjoin => 'matchjoinsel' }, { oid => '3694', descr => 'is contained by', oprname => '<@', oprleft => 'tsquery', oprright => 'tsquery', oprresult => 'bool', oprcom => '@>(tsquery,tsquery)', - oprcode => 'tsq_mcontained', oprrest => 'contsel', oprjoin => 'contjoinsel' }, + oprcode => 'tsq_mcontained', oprrest => 'matchsel', oprjoin => 'matchjoinsel' }, { oid => '3762', descr => 'text search match', oprname => '@@', oprleft => 'text', oprright => 'text', oprresult => 'bool', - oprcode => 'ts_match_tt', oprrest => 'contsel', oprjoin => 'contjoinsel' }, + oprcode => 'ts_match_tt', oprrest => 'matchsel', oprjoin => 'matchjoinsel' }, { oid => '3763', descr => 'text search match', oprname => '@@', oprleft => 'text', oprright => 'tsquery', - oprresult => 'bool', oprcode => 'ts_match_tq', oprrest => 'contsel', - oprjoin => 'contjoinsel' }, + oprresult => 'bool', oprcode => 'ts_match_tq', oprrest => 'matchsel', + oprjoin => 'matchjoinsel' }, # generic record comparison operators { oid => '2988', oid_symbol => 'RECORD_EQ_OP', descr => 'equal', @@ -3178,7 +3178,7 @@ { oid => '3897', descr => 'is adjacent to', oprname => '-|-', oprleft => 'anyrange', oprright => 'anyrange', oprresult => 'bool', oprcom => '-|-(anyrange,anyrange)', - oprcode => 'range_adjacent', oprrest => 'contsel', oprjoin => 'contjoinsel' }, + oprcode => 'range_adjacent', oprrest => 'matchsel', oprjoin => 'matchjoinsel' }, { oid => '3898', descr => 'range union', oprname => '+', oprleft => 'anyrange', oprright => 'anyrange', oprresult => 'anyrange', oprcom => '+(anyrange,anyrange)', @@ -3258,22 +3258,22 @@ { oid => '3246', descr => 'contains', oprname => '@>', oprleft => 'jsonb', oprright => 'jsonb', oprresult => 'bool', oprcom => '<@(jsonb,jsonb)', oprcode => 'jsonb_contains', - oprrest => 'contsel', oprjoin => 'contjoinsel' }, + oprrest => 'matchsel', oprjoin => 'matchjoinsel' }, { oid => '3247', descr => 'key exists', oprname => '?', oprleft => 'jsonb', oprright => 'text', oprresult => 'bool', - oprcode => 'jsonb_exists', oprrest => 'contsel', oprjoin => 'contjoinsel' }, + oprcode => 'jsonb_exists', oprrest => 'matchsel', oprjoin => 'matchjoinsel' }, { oid => '3248', descr => 'any key exists', oprname => '?|', oprleft => 'jsonb', oprright => '_text', oprresult => 'bool', - oprcode => 'jsonb_exists_any', oprrest => 'contsel', - oprjoin => 'contjoinsel' }, + oprcode => 'jsonb_exists_any', oprrest => 'matchsel', + oprjoin => 'matchjoinsel' }, { oid => '3249', descr => 'all keys exist', oprname => '?&', oprleft => 'jsonb', oprright => '_text', oprresult => 'bool', - oprcode => 'jsonb_exists_all', oprrest => 'contsel', - oprjoin => 'contjoinsel' }, + oprcode => 'jsonb_exists_all', oprrest => 'matchsel', + oprjoin => 'matchjoinsel' }, { oid => '3250', descr => 'is contained by', oprname => '<@', oprleft => 'jsonb', oprright => 'jsonb', oprresult => 'bool', oprcom => '@>(jsonb,jsonb)', oprcode => 'jsonb_contained', - oprrest => 'contsel', oprjoin => 'contjoinsel' }, + oprrest => 'matchsel', oprjoin => 'matchjoinsel' }, { oid => '3284', descr => 'concatenate', oprname => '||', oprleft => 'jsonb', oprright => 'jsonb', oprresult => 'jsonb', oprcode => 'jsonb_concat' }, @@ -3292,10 +3292,10 @@ { oid => '4012', descr => 'jsonpath exists', oprname => '@?', oprleft => 'jsonb', oprright => 'jsonpath', oprresult => 'bool', oprcode => 'jsonb_path_exists_opr(jsonb,jsonpath)', - oprrest => 'contsel', oprjoin => 'contjoinsel' }, + oprrest => 'matchsel', oprjoin => 'matchjoinsel' }, { oid => '4013', descr => 'jsonpath match', oprname => '@@', oprleft => 'jsonb', oprright => 'jsonpath', oprresult => 'bool', oprcode => 'jsonb_path_match_opr(jsonb,jsonpath)', - oprrest => 'contsel', oprjoin => 'contjoinsel' }, + oprrest => 'matchsel', oprjoin => 'matchjoinsel' }, ] diff --git a/src/include/catalog/pg_proc.dat b/src/include/catalog/pg_proc.dat index 07a86c7..088d106 100644 --- a/src/include/catalog/pg_proc.dat +++ b/src/include/catalog/pg_proc.dat @@ -10574,6 +10574,15 @@ prosrc => 'shift_jis_2004_to_euc_jis_2004', probin => '$libdir/euc2004_sjis2004' }, +{ oid => '8387', + descr => 'restriction selectivity for generic matching operators', + proname => 'matchsel', provolatile => 's', prorettype => 'float8', + proargtypes => 'internal oid internal int4', prosrc => 'matchsel' }, +{ oid => '8388', descr => 'join selectivity for generic matching operators', + proname => 'matchjoinsel', provolatile => 's', prorettype => 'float8', + proargtypes => 'internal oid internal int2 internal', + prosrc => 'matchjoinsel' }, + # replication/origin.h { oid => '6003', descr => 'create a replication origin', proname => 'pg_replication_origin_create', provolatile => 'v', diff --git a/src/include/utils/selfuncs.h b/src/include/utils/selfuncs.h index 1c9570f..faa01cf 100644 --- a/src/include/utils/selfuncs.h +++ b/src/include/utils/selfuncs.h @@ -148,6 +148,9 @@ extern double histogram_selectivity(VariableStatData *vardata, FmgrInfo *opproc, Datum constval, bool varonleft, int min_hist_size, int n_skip, int *hist_size); +extern double generic_restriction_selectivity(PlannerInfo *root, Oid operator, + List *args, int varRelid, + double default_selectivity); extern double ineq_histogram_selectivity(PlannerInfo *root, VariableStatData *vardata, FmgrInfo *opproc, bool isgt, bool iseq,
diff --git a/contrib/hstore/Makefile b/contrib/hstore/Makefile index 24a9b02..872ca03 100644 --- a/contrib/hstore/Makefile +++ b/contrib/hstore/Makefile @@ -11,6 +11,7 @@ OBJS = \ EXTENSION = hstore DATA = hstore--1.4.sql \ + hstore--1.6--1.7.sql \ hstore--1.5--1.6.sql \ hstore--1.4--1.5.sql \ hstore--1.3--1.4.sql hstore--1.2--1.3.sql \ diff --git a/contrib/hstore/hstore--1.6--1.7.sql b/contrib/hstore/hstore--1.6--1.7.sql new file mode 100644 index 0000000..08d7b35 --- /dev/null +++ b/contrib/hstore/hstore--1.6--1.7.sql @@ -0,0 +1,19 @@ +/* contrib/hstore/hstore--1.6--1.7.sql */ + +-- complain if script is sourced in psql, rather than via ALTER EXTENSION +\echo Use "ALTER EXTENSION hstore UPDATE TO '1.7'" to load this file. \quit + +ALTER OPERATOR ? (hstore, text) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ?| (hstore, text[]) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ?& (hstore, text[]) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR @> (hstore, hstore) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR <@ (hstore, hstore) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR @ (hstore, hstore) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ~ (hstore, hstore) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); diff --git a/contrib/hstore/hstore.control b/contrib/hstore/hstore.control index e0fbb8b..f0da772 100644 --- a/contrib/hstore/hstore.control +++ b/contrib/hstore/hstore.control @@ -1,6 +1,6 @@ # hstore extension comment = 'data type for storing sets of (key, value) pairs' -default_version = '1.6' +default_version = '1.7' module_pathname = '$libdir/hstore' relocatable = true trusted = true diff --git a/contrib/ltree/Makefile b/contrib/ltree/Makefile index 70c5e37..58a8295 100644 --- a/contrib/ltree/Makefile +++ b/contrib/ltree/Makefile @@ -15,7 +15,7 @@ OBJS = \ PG_CPPFLAGS = -DLOWER_NODE EXTENSION = ltree -DATA = ltree--1.1.sql ltree--1.0--1.1.sql +DATA = ltree--1.1.sql ltree--1.0--1.1.sql ltree--1.1--1.2.sql PGFILEDESC = "ltree - hierarchical label data type" HEADERS = ltree.h diff --git a/contrib/ltree/ltree--1.1--1.2.sql b/contrib/ltree/ltree--1.1--1.2.sql new file mode 100644 index 0000000..cc70757 --- /dev/null +++ b/contrib/ltree/ltree--1.1--1.2.sql @@ -0,0 +1,86 @@ +/* contrib/ltree/ltree--1.1--1.2.sql */ + +-- complain if script is sourced in psql, rather than via ALTER EXTENSION +\echo Use "ALTER EXTENSION ltree UPDATE TO '1.2'" to load this file. \quit + +ALTER OPERATOR < (ltree, ltree) + SET (RESTRICT = scalarltsel, JOIN = scalarltjoinsel); +ALTER OPERATOR <= (ltree, ltree) + SET (RESTRICT = scalarlesel, JOIN = scalarlejoinsel); +ALTER OPERATOR >= (ltree, ltree) + SET (RESTRICT = scalargesel, JOIN = scalargejoinsel); +ALTER OPERATOR > (ltree, ltree) + SET (RESTRICT = scalargtsel, JOIN = scalargtjoinsel); + +ALTER OPERATOR @> (ltree, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^@> (ltree, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR <@ (ltree, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^<@ (ltree, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ~ (ltree, lquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ~ (lquery, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^~ (ltree, lquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^~ (lquery, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ? (ltree, _lquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ? (_lquery, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^? (ltree, _lquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^? (_lquery, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR @ (ltree, ltxtquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR @ (ltxtquery, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^@ (ltree, ltxtquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^@ (ltxtquery, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR @> (_ltree, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR <@ (ltree, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR <@ (_ltree, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR @> (ltree, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ~ (_ltree, lquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ~ (lquery, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ? (_ltree, _lquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ? (_lquery, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR @ (_ltree, ltxtquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR @ (ltxtquery, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^@> (_ltree, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^<@ (ltree, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^<@ (_ltree, ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^@> (ltree, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^~ (_ltree, lquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^~ (lquery, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^? (_ltree, _lquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^? (_lquery, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^@ (_ltree, ltxtquery) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR ^@ (ltxtquery, _ltree) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); diff --git a/contrib/ltree/ltree.control b/contrib/ltree/ltree.control index 3118df6..b408d64 100644 --- a/contrib/ltree/ltree.control +++ b/contrib/ltree/ltree.control @@ -1,6 +1,6 @@ # ltree extension comment = 'data type for hierarchical tree-like structures' -default_version = '1.1' +default_version = '1.2' module_pathname = '$libdir/ltree' relocatable = true trusted = true diff --git a/contrib/ltree/ltree_op.c b/contrib/ltree/ltree_op.c index 2791037..8ad8a1d 100644 --- a/contrib/ltree/ltree_op.c +++ b/contrib/ltree/ltree_op.c @@ -561,6 +561,9 @@ ltree2text(PG_FUNCTION_ARGS) /* * ltreeparentsel - Selectivity of parent relationship for ltree data types. + * + * This function is not used anymore, if the ltree extension has been + * updated to 1.2 or later. */ Datum ltreeparentsel(PG_FUNCTION_ARGS) diff --git a/contrib/pg_trgm/Makefile b/contrib/pg_trgm/Makefile index f0a8d9c..d75e9ad 100644 --- a/contrib/pg_trgm/Makefile +++ b/contrib/pg_trgm/Makefile @@ -9,7 +9,7 @@ OBJS = \ trgm_regexp.o EXTENSION = pg_trgm -DATA = pg_trgm--1.3--1.4.sql \ +DATA = pg_trgm--1.4--1.5.sql pg_trgm--1.3--1.4.sql \ pg_trgm--1.3.sql pg_trgm--1.2--1.3.sql pg_trgm--1.1--1.2.sql \ pg_trgm--1.0--1.1.sql PGFILEDESC = "pg_trgm - trigram matching" diff --git a/contrib/pg_trgm/expected/pg_trgm.out b/contrib/pg_trgm/expected/pg_trgm.out index 91596f8..19006f2 100644 --- a/contrib/pg_trgm/expected/pg_trgm.out +++ b/contrib/pg_trgm/expected/pg_trgm.out @@ -4013,16 +4013,15 @@ SELECT similarity('Szczecin', 'Warsaw'); EXPLAIN (COSTS OFF) SELECT DISTINCT city, similarity(city, 'Warsaw'), show_limit() FROM restaurants WHERE city % 'Warsaw'; - QUERY PLAN -------------------------------------------------------------- - Unique - -> Sort - Sort Key: city, (similarity(city, 'Warsaw'::text)) - -> Bitmap Heap Scan on restaurants - Recheck Cond: (city % 'Warsaw'::text) - -> Bitmap Index Scan on restaurants_city_idx - Index Cond: (city % 'Warsaw'::text) -(7 rows) + QUERY PLAN +------------------------------------------------------------------- + HashAggregate + Group Key: city, similarity(city, 'Warsaw'::text), show_limit() + -> Bitmap Heap Scan on restaurants + Recheck Cond: (city % 'Warsaw'::text) + -> Bitmap Index Scan on restaurants_city_idx + Index Cond: (city % 'Warsaw'::text) +(6 rows) SELECT set_limit(0.3); set_limit diff --git a/contrib/pg_trgm/pg_trgm--1.4--1.5.sql b/contrib/pg_trgm/pg_trgm--1.4--1.5.sql new file mode 100644 index 0000000..c0d9f6f --- /dev/null +++ b/contrib/pg_trgm/pg_trgm--1.4--1.5.sql @@ -0,0 +1,15 @@ +/* contrib/pg_trgm/pg_trgm--1.4--1.5.sql */ + +-- complain if script is sourced in psql, rather than via ALTER EXTENSION +\echo Use "ALTER EXTENSION pg_trgm UPDATE TO '1.5'" to load this file. \quit + +ALTER OPERATOR % (text, text) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR <% (text, text) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR %> (text, text) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR <<% (text, text) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); +ALTER OPERATOR %>> (text, text) + SET (RESTRICT = matchsel, JOIN = matchjoinsel); diff --git a/contrib/pg_trgm/pg_trgm.control b/contrib/pg_trgm/pg_trgm.control index 831ba23..ed4487e 100644 --- a/contrib/pg_trgm/pg_trgm.control +++ b/contrib/pg_trgm/pg_trgm.control @@ -1,6 +1,6 @@ # pg_trgm extension comment = 'text similarity measurement and index searching based on trigrams' -default_version = '1.4' +default_version = '1.5' module_pathname = '$libdir/pg_trgm' relocatable = true trusted = true