----- Original Message -----
From: "Merlin Moncure" <[EMAIL PROTECTED]>
To: "Janning Vygen" <[EMAIL PROTECTED]>
Cc: <pgsql-general@postgresql.org>
Sent: Wednesday, April 12, 2006 12:31 PM
Subject: Re: [GENERAL] Hardware related question: 3ware 9500S
[snip]
> - I want to know if 3ware 9500 S is recommended or if its one of those
> controllers which sucks.
escalade is a fairly full featured raid controller for the price.
consider it the ford taurus of raid controllers, it's functional and
practical but not sexy. Their S line is not native sata but operates
over a pata->sata bridge. Stay away from raid 5.
Hi Merlin
Why? What's wrong with raid 5? I could well be wrong (given how little
attention I have paid to hardware over the past few years because of a focus
on developing software), but I was under the impression that of the raid
options available, raid 5 with hot swappable drives provided good data
protection and performance at a reasonably low cost. Is the problem with
the concept of raid 5, or the common implementations?
Do you have a recommendation regarding whether the raid array is built into
the server running the RDBMS (in our case PostgreSQL), or located in a
network appliance dedicated to storing the data managed by the RDBMS? If
you were asked to design a subnet that provides the best possible
performance and protection of the data, but without gold-plating anything,
what would you do? How much redundancy would you build in, and at what
granularity?
Ted
---------------------------(end of broadcast)---------------------------
TIP 3: Have you checked our extensive FAQ?
http://www.postgresql.org/docs/faq
