Hi,
I am new to pgpool. I have just installed pgpool and configured Master/Slave
mode with "stream" sub_mode. I have enabled load balance as that is the main
feature we want test out. I have enabled Health Check. The load balance appears
to work as I can see connections to both Master and Slave database.
pgpool is installed on a separate server. (linux Redhat 6)
ie: server1 = pgpool
server2 = Master
server3= Slave
(wal streaming replication)
I tested two scenarios and it failing:
1. When I stop/start the slave database, pgpool stops load balancing. It
looks like it doesn't know that it available again after the slave comes backup
online. Even after I restart pgpool it doesn't load balance. It just sends all
queries to the Master.
2. I tried shutting down slave db and then shut down master db (no
failover) and restart master db and restart slave, pgpool failed to reconnect
to the master or the slave. I get database unavailable errors. However, if I
restart pgpool for this scenario, its all fine.
It appears that pgpool is not doing the healthcheck correctly?? Or have I
missed something here??
Here are my main pgpool.conf changes:
#------------------------------------------------------------------------------
# CONNECTIONS
#------------------------------------------------------------------------------
# - pgpool Connection Settings -
listen_addresses = '*'
# Host name or IP address to listen on:
# '*' for all, '' for no TCP/IP connections
# (change requires restart)
#port = 9999
port = 5432
# Port number
# (change requires restart)
socket_dir = '/var/run/postgresql'
# Unix domain socket path
# The Debian package defaults to
# /var/run/postgresql
# (change requires restart)
listen_backlog_multiplier = 2
# Set the backlog parameter of listen(2) to
#
num_init_children * listen_backlog_multiplier.
# (change requires restart)
serialize_accept = off
# whether to serialize accept() call to
avoid thundering herd problem
# (change requires restart)
# - pgpool Communication Manager Connection Settings -
pcp_listen_addresses = '*'
# Host name or IP address for pcp process to
listen on:
# '*' for all, '' for no TCP/IP connections
# (change requires restart)
pcp_port = 9898
# Port number for pcp
# (change requires restart)
pcp_socket_dir = '/var/run/postgresql'
# Unix domain socket path for pcp
# The Debian package defaults to
# /var/run/postgresql
# (change requires restart)
# - Backend Connection Settings -
backend_hostname0 = '10.69.20.11'
# Host name or IP address to connect to for
backend 0
backend_port0 = 5432
# Port number for backend 0
backend_weight0 = 1
# Weight for backend 0 (only in load
balancing mode)
backend_data_directory0 = '/var/lib/pgsql/9.5/data'
# Data directory for backend 0
backend_flag0 = 'ALLOW_TO_FAILOVER'
# Controls various backend behavior
# ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER
backend_hostname1 = '10.68.20.11'
backend_port1 = 5432
backend_weight1 = 1
backend_data_directory1 = '/var/lib/pgsql/9.5/data'
backend_flag1 = 'ALLOW_TO_FAILOVER'
#------------------------------------------------------------------------------
# POOLS
#------------------------------------------------------------------------------
# - Concurrent session and pool size -
num_init_children = 32
# Number of concurrent sessions allowed
# (change requires restart)
max_pool = 4
# Number of connection pool caches per
connection
# (change requires restart)
# - Life time -
child_life_time = 300
# Pool exits after being idle for this many
seconds
child_max_connections = 0
# Pool exits after receiving that many
connections
# 0 means no exit
connection_life_time = 0
# Connection to backend closes after being
idle for this many seconds
# 0 means no close
client_idle_limit = 0
# Client is disconnected after being idle
for that many seconds
# (even inside an explicit transactions!)
# 0 means no disconnection
#------------------------------------------------------------------------------
# CONNECTION POOLING
#------------------------------------------------------------------------------
connection_cache = on
# Activate connection pools
# (change requires restart)
# Semicolon separated list of queries
# to be issued at the end of a session
# The default is for 8.3 and later
reset_query_list = 'ABORT; DISCARD ALL'
# The following one is for 8.2 and before
#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
#------------------------------------------------------------------------------
# LOAD BALANCING MODE
#------------------------------------------------------------------------------
load_balance_mode = on
# Activate load balancing mode
# (change requires restart)
ignore_leading_white_space = on
# Ignore leading white spaces of each query
white_function_list = ''
# Comma separated list of function names
# that don't write to database
# Regexp are accepted
#black_function_list = 'nextval,setval,nextval,setval'
black_function_list = 'currval,lastval,nextval,setval'
# Comma separated list of function names
# that write to database
# Regexp are accepted
database_redirect_preference_list = ''
# comma
separated list of pairs of database and node id.
# example:
postgres:primary,mydb[0-4]:1,mydb[5-9]:2'
# valid for
streaming replicaton mode only.
app_name_redirect_preference_list = ''
# comma
separated list of pairs of app name and node id.
# example:
'psql:primary,myapp[0-4]:1,myapp[5-9]:standby'
# valid for
streaming replicaton mode only.
allow_sql_comments = off
# if on,
ignore SQL comments when judging if load balance or
# query
cache is possible.
# If off,
SQL comments effectively prevent the judgment
# (pre 3.4
behavior).
#------------------------------------------------------------------------------
# MASTER/SLAVE MODE
#------------------------------------------------------------------------------
master_slave_mode = on
# Activate master/slave mode
# (change requires restart)
master_slave_sub_mode = 'stream'
# Master/slave sub mode
# Valid values are combinations slony or
# stream. Default is slony.
# (change requires restart)
# - Streaming -
sr_check_period = 5
# Streaming replication check period
# Disabled (0) by default
sr_check_user = 'postgres'
# Streaming replication check user
# This is necessary even if you disable
# streaming replication delay check with
# sr_check_period = 0
sr_check_password = 'xxxxxxxxxxxxxxxx'
# Password for streaming replication check
user
sr_check_database = 'postgres'
# Database name for streaming replication
check
delay_threshold = 10000000
# Threshold before not dispatching query to
standby node
# Unit is in bytes
# Disabled (0) by default
# - Special commands -
follow_master_command = ''
# Executes this command after master failover
# Special values:
# %d = node id
# %h = host name
# %p = port number
# %D = database cluster path
# %m = new master node id
# %H = hostname of the new master node
# %M = old master node id
# %P = old primary node id
# %r = new master port number
# %R = new master database cluster path
# %% = '%' character
#------------------------------------------------------------------------------
# HEALTH CHECK
#------------------------------------------------------------------------------
health_check_period = 40
# Health check period
# Disabled (0) by default
health_check_timeout = 10
# Health check timeout
# 0 means no timeout
health_check_user = 'postgres'
# Health check user
health_check_password = 'xxxxxxxxxxxxxxxxxx'
# Password for health check user
health_check_database = ''
# Database name for health check. If '',
tries 'postgres' frist, then 'template1'
health_check_max_retries = 3
# Maximum number of times to retry a failed
health check before giving up.
health_check_retry_delay = 1
# Amount of time to wait (in seconds)
between retries.
connect_timeout = 10000
# Timeout value in milliseconds before
giving up to connect to backend.
# Default is
10000 ms (10 second). Flaky network user may want to increase
# the value.
0 means no timeout.
# Note that
this value is not only used for health check,
# but also
for ordinary conection to backend.
Thanks.
Dylan Luong
Information Strategy & Technology Services
University of South Australia
A Building, Room A2-05, Mawson Lakes Campus
MAWSON LAKES
South Australia 5095
Email: dylan.lu...@unisa.edu.au<mailto:dylan.lu...@unisa.edu.au>
Phone: +61 8 83023629
Fax: +61 8 83023577
WWW: http://www.unisa.edu.au
