I already try to change the dependencies with postgresql.service (adding as a prerequesite lvm scan, iscsi) . The mounting began before postgresql but the mount was successfull after the failure. ----- Mail d'origine ----- De: Adrian Klaver <adrian.kla...@aklaver.com> À: p...@free.fr, pgsql-general@postgresql.org Envoyé: Wed, 17 Feb 2016 18:35:15 +0100 (CET) Objet: Re: [GENERAL] Pgsql troubleshooting & Iscsi
On 02/17/2016 09:07 AM, p...@free.fr wrote: > Hi everybody, > > I installed a postgresql database on Redhat 7.1 and I decided to move the > database on an ISCSI device (LUN) inside a logical volume, mounted at > starting of the machine (xfs formatted). The mounting point is /var/lib/pgsql > > At the boot of the server, postgresql.service is in failed status. > > In messages.log : > systemd: mounting /var/lib/pgsql > starting PostgreSQL database server > kernel sdv: unknown partition table > sd 2:0:0:0: [sdb] attached SCSI disk > xfs (dm-4): Mounting V4 Filesystem > postgresql-check-db-dir: "/var/lib/pgsql/data" is missing or empty > postgresql.service: control process exited, code=exited status=1 > Failed to start PostgreSQL database server. > > > When I'm logged on the server, if it try to start manually the database : > systemctl start postgresql --> OK (and I don't lose any data, database is > available) > > I think it's a problem of order in the boot process : network service must be > started, then iscsi, then lvm etc... So I tried to force dependencies on the > /usr/lib/systemd/system/postgresql.service adding "After=lvm-pgscan.service > iscsi.service" etc... but the result is the same : failure in starting > postgresql > > > > systemd: Starting Remote File Systems (Pre) > systemd: Reached Remote File Systems (Pre) > systemd: mounting /var/lib/pgsql ^ File system not mounted yet. > systemd: starting PostgreSQL database server > kernel sdb: unknown partition table > postgresql-check-db-dir: "/var/lib/pgsql/data" is missing or empty ^ Cannot find mount point > kernel: xfs (dm-4): Mounting V4 Filesystem > postgresql.service: control process exited, code=exited status=1 > Failed to start PostgreSQL database server. > Unit postgresql.service entered failed state > sd 2:0:0:0: [sdb] attached SCSI disk > starting LVM2 PV scan on device 8:16 > kernel: xfs (dm-3): Ending clean mount > systemd: Mounted /var/lib/pgsql ^ Now file system is mounted. > Starting Remote File Systems > Reached target Remote File Systems > > Any ideas ? Find where file system mounting is completed and start Postgres after that. I am still figuring out systemd, so I can not offer anything more concrete. > > regards, > Magique > > -- Adrian Klaver adrian.kla...@aklaver.com -- Sent via pgsql-general mailing list (pgsql-general@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-general
