Kevin, Thanks for the response. I will look into it based on your suggestion.
-Laurent On Mon, Oct 14, 2013 at 8:29 PM, Kevin Grittner <kgri...@ymail.com> wrote: > Laurentius Purba <lpu...@sproutloud.com> wrote: > > > I did google this error message, "...signal 10: Bus error.." and > > found the issue with hardware problem, memory. > > > > Do you have any other pointers or clues that I can look into? > > Well, the very first thing I would do is to make sure that the OS > and jail software was up-to-date, in case it is a bug which has > been fixed. I might take a look at BIOS and firmware levels, too. > Tomas makes a good point about the XML library tending to be > problematic, so I would make sure that was current. > > If I still had the problem after that, I would try to distil it > down to the smallest reproducible test case, and see whether it ran > OK outside the jail. > > Another approach would be to run hardware tests, although that > tends to require a longer maintenance window than the other things. > > Basically, there are a lot of layers the problem could be in, and > not a lot of reason to suspect any particular layer, so you need to > start ruling things out. In a situation like that I tend to start > with the fastest, easiest layers to check first. > > -- > Kevin Grittner > EDB: http://www.enterprisedb.com > The Enterprise PostgreSQL Company >
