it is a firewall issue. they can't open the port that we requested it. so as you mentioned tunnel to the primary via tunnel. will give that a try
regards On Mon, Sep 30, 2013 at 11:10 PM, Chris Travers <chris.trav...@gmail.com>wrote: > > > > On Mon, Sep 30, 2013 at 7:14 PM, akp geek <akpg...@gmail.com> wrote: > >> Hi all - >> >> Currently we have set up one master one slave , which working >> fine. Now we need to replicate to an other slave. The problem we have , >> the port that we use on primary can not be reached from the new slave. We >> can't the change the primary port also, because many applications using it. >> >> I can't reach out to my primary using the recovery.conf on the >> new slave. >> >> Can you suggest how I can handle this? Appreciate your help. >> > > Why can't you reach it? Is it a firewall? > > if so basically you have two options. The first is you can configure your > firewall to allow the connection. The second is you can tunnel through > using another port/service like SSH or IPSec ESP. > > Best Wishes, > Chris Travers > >> >> Regards >> >> > > > -- > Best Wishes, > Chris Travers > > Efficito: Hosted Accounting and ERP. Robust and Flexible. No vendor > lock-in. > http://www.efficito.com/learn_more.shtml >
