On 03/14/12 12:53 PM, Scott Marlowe wrote:
Note that if you don't need a lot of storage you can often use 300G 15k SAS drives which are around $300 each. 20 of those in a RAID-10 gives you ~3TB of storage which is plenty for most transactional applications.
I'm actually using 25 x 146gb 15k SAS2 as we didn't need space, just speed, so the 20xraid10 is 1.4TB. most of our database tests to date have been in the 50-100GB range. and they shread at IOPS. the controller and/or IO channels seems to bottleneck somewhere up around 1.2GB/sec sustained write, or at about 12000 write IOPS.
afaik, the HP P411 raid card is a LSI Logic megasas2 card with HP firmware, the hardware is equivalent to the LSI 9260-8i. the HP firmware is somewhat less annoying than the LSI megacli stuff.
-- john r pierce N 37, W 122 santa cruz ca mid-left coast -- Sent via pgsql-general mailing list (pgsql-general@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-general
