这是 getpwuid 的问题，测试脚本没考虑到 windows 上的安装，可以考虑 force install 这个模块.
2009/11/6 Zhang JiaQiang <[email protected]> > > 失败信息如下，有人成功过么？ > > cpan> install Net::SSH::Perl > Running install for module 'Net::SSH::Perl' > Running make for T/TU/TURNSTEP/Net-SSH-Perl-1.34.tar.gz > Checksum for C:\strawberry\cpan\sources\authors\id\T\TU\TURNSTEP\Net- > SSH-Perl-1. > 34.tar.gz ok > > CPAN.pm: Going to build T/TU/TURNSTEP/Net-SSH-Perl-1.34.tar.gz > > This is Net::SSH::Perl. > > As of version 1.00, Net::SSH::Perl supports both the SSH1 and > SSH2 protocols natively. The two protocols have different > module prerequisitives, so you need to decide which protocol(s) > you plan to use. If you use one or the other, only those modules > for your chosen protocol will be installed; if you choose both, > all of the supporting modules will be installed. Please choose > the protocols you'd like to use from the following list ("Both" > is the default). > > [1] SSH1 > [2] SSH2 > [3] Both SSH1 and SSH2 > > Which protocol(s) do you plan to use? [3] > > Some of the Net::SSH::Perl ciphers depend on a Crypt:: module from > CPAN. You may already have the necessary modules installed, in which > case you don't need to bother with this step. Otherwise you'll need > to install at least one cipher to use Net::SSH::Perl. Please choose > at least one from the following list (Crypt::IDEA is the default). > > [1] IDEA > [2] DES > [3] DES3 > [4] Blowfish > [5] RC4 > > Enter your choices, separated by spaces: [1] > > Checking for optional modules > > Checking if your kit is complete... > Looks good > Writing Makefile for Net::SSH::Perl > cp lib/Net/SSH/Perl/Agent.pm blib\lib\Net\SSH\Perl\Agent.pm > cp lib/Net/SSH/Perl/Auth/KeyboardInt.pm blib\lib\Net\SSH\Perl\Auth > \KeyboardInt.p > m > cp lib/Net/SSH/Perl/Util/RSA.pm blib\lib\Net\SSH\Perl\Util\RSA.pm > cp lib/Net/SSH/Perl/AuthMgr.pm blib\lib\Net\SSH\Perl\AuthMgr.pm > cp lib/Net/SSH/Perl/Auth/Rhosts.pm blib\lib\Net\SSH\Perl\Auth > \Rhosts.pm > cp lib/Net/SSH/Perl/Cipher/IDEA.pm blib\lib\Net\SSH\Perl\Cipher > \IDEA.pm > cp lib/Net/SSH/Perl/Util/Authfile.pm blib\lib\Net\SSH\Perl\Util > \Authfile.pm > cp lib/Net/SSH/Perl/Handle/SSH2.pm blib\lib\Net\SSH\Perl\Handle > \SSH2.pm > cp lib/Net/SSH/Perl/Util/SSH1MP.pm blib\lib\Net\SSH\Perl\Util > \SSH1MP.pm > cp lib/Net/SSH/Perl/Util/Hosts.pm blib\lib\Net\SSH\Perl\Util\Hosts.pm > cp lib/Net/SSH/Perl/Auth.pm blib\lib\Net\SSH\Perl\Auth.pm > cp lib/Net/SSH/Perl/Util/Term.pm blib\lib\Net\SSH\Perl\Util\Term.pm > cp lib/Net/SSH/Perl/Handle/SSH1.pm blib\lib\Net\SSH\Perl\Handle > \SSH1.pm > cp lib/Net/SSH/Perl/Cipher/CBC.pm blib\lib\Net\SSH\Perl\Cipher\CBC.pm > cp lib/Net/SSH/Perl/Comp.pm blib\lib\Net\SSH\Perl\Comp.pm > cp lib/Net/SSH/Perl/Auth/PublicKey.pm blib\lib\Net\SSH\Perl\Auth > \PublicKey.pm > cp lib/Net/SSH/Perl/Subsystem/Client.pm blib\lib\Net\SSH\Perl\Subsystem > \Client.p > m > cp lib/Net/SSH/Perl/Kex.pm blib\lib\Net\SSH\Perl\Kex.pm > cp lib/Net/SSH/Perl/Auth/Password.pm blib\lib\Net\SSH\Perl\Auth > \Password.pm > cp lib/Net/SSH/Perl/Cipher/Blowfish.pm blib\lib\Net\SSH\Perl\Cipher > \Blowfish.pm > cp lib/Net/SSH/Perl/Auth/Rhosts_RSA.pm blib\lib\Net\SSH\Perl\Auth > \Rhosts_RSA.pm > cp lib/Net/SSH/Perl/Key/RSA1.pm blib\lib\Net\SSH\Perl\Key\RSA1.pm > cp lib/Net/SSH/Perl/Key.pm blib\lib\Net\SSH\Perl\Key.pm > cp lib/Net/SSH/Perl/Buffer.pm blib\lib\Net\SSH\Perl\Buffer.pm > cp lib/Net/SSH/Perl/Key/DSA.pm blib\lib\Net\SSH\Perl\Key\DSA.pm > cp lib/Net/SSH/Perl/Cipher/DES3.pm blib\lib\Net\SSH\Perl\Cipher > \DES3.pm > cp lib/Net/SSH/Perl/Cipher/RC4.pm blib\lib\Net\SSH\Perl\Cipher\RC4.pm > cp lib/Net/SSH/Perl/Cipher.pm blib\lib\Net\SSH\Perl\Cipher.pm > cp lib/Net/SSH/Perl/Constants.pm blib\lib\Net\SSH\Perl\Constants.pm > cp lib/Net/SSH/Perl/ChannelMgr.pm blib\lib\Net\SSH\Perl\ChannelMgr.pm > cp lib/Net/SSH/Perl/Auth/RSA.pm blib\lib\Net\SSH\Perl\Auth\RSA.pm > cp lib/Net/SSH/Perl/Cipher/CFB.pm blib\lib\Net\SSH\Perl\Cipher\CFB.pm > cp lib/Net/SSH/Perl/Util/SSH1Misc.pm blib\lib\Net\SSH\Perl\Util > \SSH1Misc.pm > cp lib/Net/SSH/Perl/Comp/Zlib.pm blib\lib\Net\SSH\Perl\Comp\Zlib.pm > cp lib/Net/SSH/Perl/Mac.pm blib\lib\Net\SSH\Perl\Mac.pm > cp lib/Net/SSH/Perl/Kex/DH1.pm blib\lib\Net\SSH\Perl\Kex\DH1.pm > cp lib/Net/SSH/Perl/SSH2.pm blib\lib\Net\SSH\Perl\SSH2.pm > cp lib/Net/SSH/Perl/Config.pm blib\lib\Net\SSH\Perl\Config.pm > cp lib/Net/SSH/Perl/Subsystem/Server.pm blib\lib\Net\SSH\Perl\Subsystem > \Server.p > m > cp lib/Net/SSH/Perl/Util.pm blib\lib\Net\SSH\Perl\Util.pm > cp lib/Net/SSH/Perl/Handle.pm blib\lib\Net\SSH\Perl\Handle.pm > cp lib/Net/SSH/Perl/Util/SSH2MP.pm blib\lib\Net\SSH\Perl\Util > \SSH2MP.pm > cp lib/Net/SSH/Perl.pm blib\lib\Net\SSH\Perl.pm > cp lib/Net/SSH/Perl/Auth/ChallengeResponse.pm blib\lib\Net\SSH\Perl > \Auth\Challen > geResponse.pm > cp lib/Net/SSH/Perl/Channel.pm blib\lib\Net\SSH\Perl\Channel.pm > cp lib/Net/SSH/Perl/SSH1.pm blib\lib\Net\SSH\Perl\SSH1.pm > cp lib/Net/SSH/Perl/Cipher/DES.pm blib\lib\Net\SSH\Perl\Cipher\DES.pm > cp lib/Net/SSH/Perl/Packet.pm blib\lib\Net\SSH\Perl\Packet.pm > cp lib/Net/SSH/Perl/Key/RSA.pm blib\lib\Net\SSH\Perl\Key\RSA.pm > TURNSTEP/Net-SSH-Perl-1.34.tar.gz > C:\strawberry\c\bin\dmake.EXE -- OK > Running make test > C:\strawberry\perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" > "test_harness(0, > 'blib\lib', 'blib\arch')" t/*.t > t/00-signature.t ... skipped: Set the environment variable > TEST_SIGNATURE to ena > ble this test > t/01-compile.t ..... ok > t/02-buffer.t ...... ok > t/03-packet.t ...... Use of uninitialized value $ENV{"HOME"} in > concatenation (. > ) or string at C:\strawberry\cpan\build\Net-SSH-Perl-1.34-q3FdXz\blib > \lib/Net/SS > H/Perl.pm line 108. > The getpwuid function is unimplemented at C:\strawberry\cpan\build\Net- > SSH-Perl- > 1.34-q3FdXz\blib\lib/Net/SSH/Perl/SSH1.pm line 30. > # Looks like your test exited with 9 before it could output anything. > t/03-packet.t ...... Dubious, test returned 9 (wstat 2304, 0x900) > Failed 10/10 subtests > t/04-config.t ...... 1/25 Use of uninitialized value $ENV{"HOME"} in > concatenati > on (.) or string at C:\strawberry\cpan\build\Net-SSH-Perl-1.34-q3FdXz > \blib\lib/N > et/SSH/Perl.pm line 108. > t/04-config.t ...... ok > t/05-cipher.t ...... ok > t/06-auth.t ........ skipped: Test not enabled yet > t/06-circular.t .... ok > t/99-perlcritic.t .. skipped: Set the environment variable TEST_CRITIC > to enable > this test > t/99-pod.t ......... skipped: Test not ready yet. > t/99-spellcheck.t .. skipped: Set the environment variable TEST_SPELL > to enable > this test > t/99-yaml.t ........ skipped: Set the environment variable TEST_AUTHOR > to enable > this test > > Test Summary Report > ------------------- > t/03-packet.t (Wstat: 2304 Tests: 0 Failed: 0) > Non-zero exit status: 9 > Parse errors: Bad plan. You planned 10 tests but ran 0. > Files=12, Tests=106, 6 wallclock secs ( 0.16 usr + 0.14 sys = 0.30 > CPU) > Result: FAIL > Failed 1/12 test programs. 0/106 subtests failed. > dmake.EXE: Error code 255, while making 'test_dynamic' > TURNSTEP/Net-SSH-Perl-1.34.tar.gz > C:\strawberry\c\bin\dmake.EXE test -- NOT OK > //hint// to see the cpan-testers results for installing this module, > try: > reports TURNSTEP/Net-SSH-Perl-1.34.tar.gz > Running make install > make test had returned bad status, won't install without force > Failed during this command: > TURNSTEP/Net-SSH-Perl-1.34.tar.gz : make_test NO > > > > > --~--~---------~--~----~------------~-------~--~----~ 您收到此信息是由于您订阅了 Google 论坛“PerlChina Mongers 讨论组”论坛。 要在此论坛发帖，请发电子邮件到 [email protected] 要退订此论坛，请发邮件至 [email protected] 更多选项，请通过 http://groups.google.com/group/perlchina?hl=zh-CN 访问该论坛 -~----------~----~----~----~------~----~------~--~---
