Re-reply for list.
Well...
5.0.x had existing default old-style recursor.conf (default values, no
modifications done). After upgrade this file was rewritten to new
recursor.conf with yaml syntax (so all default values are gone).
tldr; this is upgrade 5.0.8 -> 5.1.1 (alltime pdns repository), not the
new install.
Renaming recursor-local.conf to recursor-local.yml:
###recursor-local.yml
#Ansible managed
allow-from=127.0.0.1,192.168.0.0/16,SUBNET_IPV4,SUBNET_IPV4,::1/128,SUBNET_IPV6,SUBNET_IPV4
local-address=::1,ADDR_IPV6,127.0.0.1,ADDR_IPV4
local-port=53
max-negative-ttl=300
query-local-address=0.0.0.0,::
serve-rfc1918=no
forward-zones=
forward-zones+=internal1.cortex.cz=ADDR;ADDR;ADDR
forward-zones+=internal2.cortex.cz=ADDR;ADDR;ADDR
forward-zones+=168.192.in-addr.arpa=ADDR;ADDR;ADDR
forward-zones+=x.x.x.x.x.x.x.x.ip6.arpa=ADDR;ADDR;ADDR
forward-zones+=internal3.cortex.cz=ADDR;ADDR;ADDR
###syslog
2024-08-30T11:15:19.559023+02:00 hostname systemd[1]: Starting
pdns-recursor.service - PowerDNS Recursor...
2024-08-30T11:15:19.616148+02:00 hostname pdns-recursor[8741]: Aug 30
11:15:19 PowerDNS Recursor 5.1.1 (C) PowerDNS.COM BV
2024-08-30T11:15:19.616222+02:00 hostname pdns-recursor[8741]: Aug 30
11:15:19 Using 64-bits mode. Built using gcc 12.2.0 on Jul 22 2024
13:49:14 by root@localhost.
2024-08-30T11:15:19.616250+02:00 hostname pdns-recursor[8741]: Aug 30
11:15:19 PowerDNS comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it according to the terms
of the GPL version 2.
2024-08-30T11:15:19.616339+02:00 hostname pdns-recursor[8741]: Aug 30
11:15:19 msg="Processing main YAML settings" subsystem="config"
level="0" prio="Notice" tid="0" ts="1725009319.615"
path="/etc/powerdns/recursor.conf"
2024-08-30T11:15:19.616367+02:00 hostname pdns-recursor[8741]: Aug 30
11:15:19 msg="Processing YAML settings" subsystem="config" level="0"
prio="Notice" tid="0" ts="1725009319.616"
path="/etc/powerdns/recursor.d/recursor-local.yml"
2024-08-30T11:15:19.616493+02:00 hostname pdns-recursor[8741]: Aug 30
11:15:19 msg="YAML config found, but error occurred processing it"
error="invalid type: string
\"allow-from=127.0.0.1,192.168.0.0/16,SUBNET_IPV4,SUBNET_IPV4,::1/128,SUBNET_IPV6,SUBNET_IPV4
local-address=::1,ADDR_IPV6,127.0.0.1,ADDR_IPV4 local-port=53
max-negative-ttl=300 query-local-address=0.0.0.0,:\", expected struct
Recursorsettings at line 3 column 1" subsystem="config" level="0"
prio="Error" tid="0" ts="1725009319.616"
configname="/etc/powerdns/recursor.conf"
2024-08-30T11:15:19.616575+02:00 hostname pdns-recursor[8741]: Aug 30
11:15:19 msg="Trying to read YAML from .yml or .conf failed, failing
back to old-style config read" subsystem="config" level="0"
prio="Warning" tid="0" ts="1725009319.616"
configname="/etc/powerdns/recursor.conf"
2024-08-30T11:15:19.616649+02:00 hostname pdns-recursor[8741]: Aug 30
11:15:19 msg="Fatal error" error="Trying to set unknown setting
'dnssec:'" subsystem="config" level="0" prio="Critical" tid="0"
ts="1725009319.616" exception="PDNSException"
2024-08-30T11:15:19.618127+02:00 hostname systemd[1]:
pdns-recursor.service: Main process exited, code=exited,
status=1/FAILURE
2024-08-30T11:15:19.618355+02:00 hostname systemd[1]:
pdns-recursor.service: Failed with result 'exit-code'.
2024-08-30T11:15:19.618644+02:00 hostname systemd[1]: Failed to start
pdns-recursor.service - PowerDNS Recursor.
For me, upgrade 5.0.8 -> 5.1.1 breaks because it overwrite even default
old-style recursor.conf and all shit with mix yaml/old-style happens.
Prochazka
Dne 2024-08-30 10:46, Otto Moerbeek via Pdns-users napsal:
On Fri, Aug 30, 2024 at 10:16:22AM +0200, Otto Moerbeek via Pdns-users
wrote:
On Fri, Aug 30, 2024 at 09:33:17AM +0200, Prochazka via Pdns-users
wrote:
> Hi,
>
> i upgraded one of the 5.0.x recursor to 5.1.1 from pdns repo. We have
> modifications in the /etc/powerdns/recursor.d/recursor-local.conf in the
> non-yaml syntax. After upgrade i see /etc/recursor.conf include
> /etc/powerdns/recursor.d/ but modifications are ignored. Why? I don't see
> (or missed info) in the documentation about not supporting old syntax on
> 5.1.x.
>
> Please confirm.
>
> Thanks
> Prochazka
5.1.1 accepts both YAML and old-style settings. It tries to read the
the recursor.conf file as YAML, but if that fails falls back to old
style. Please share more details (exact config files and log), so we
can diagnose what is going on.
Additional info: if the main recursor.conf file is YAML format, only
.yml included file are processed. Could that be happening here?
Our packages do not overwrite existing .conf files, but will install
default .conf file in YAML format for new installs.
-Otto
_______________________________________________
Pdns-users mailing list
Pdns-users@mailman.powerdns.com
https://mailman.powerdns.com/mailman/listinfo/pdns-users
_______________________________________________
Pdns-users mailing list
Pdns-users@mailman.powerdns.com
https://mailman.powerdns.com/mailman/listinfo/pdns-users
