I'll check with my guys and see what I can find for you WRT the lamp. I think it is a 212 that you need. IIRC, the 601 uses 2 condensors at a time, but you replace one of them with one of a different FL, depending on whether you are printing 120 or 35mm. Isn't there a condensor map inside the head? Bill ----- Original Message ----- From: Bill D. Casselberry Subject: Re: The Great PDML Print Challenge
> William Robb wrote: > > > Bill, Which lamp do you need? > > I think it's a Sylvania 211, maybe 212? Anyway, looks just > like a regular light bulb. It's an older Durst M601 enlarger. > > I also am beginning to think I only have the medium format > condenser set, as I lose ability to bring image into focus > about halfway up the column w/ 35mm film and a 50mm lens. I > do have the "riser gizmo" to get the lens up into the unit, > but have always had difficulty going much bigger than 6x w/ > 35mm negs. With the 75mm lens and the flat lensboard I can > just barely get 8x from 35mm - but the head is so far up it > takes considerable time. > > Bill - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
