On Sat, Mar 21, 2009 at 11:16:34PM +0900, David Savage wrote: > <http://www.manfrotto.com/Jahia/spare_parts_db_detail/site/manfrotto/op/normal/cache/off/lang/en?id_spare_items=974> > > I try straightening the section by jamming a piece of wooden dowel or > similar up it's length and applying a bit of percussive maintenance.
I've got a tiltall tripod with a slightly kinked leg section. My plan is to chuck it up in a friend's lathe, and use some sort of chucked up tool to straighten it. It may work best with a small chunk of wood to push it back into line. lrc > > Cheers, > > Dave > > 2009/3/21 Cory Waters <[email protected]>: > > I happened upon a mono pod yesterday. It's a four section Manfrotto 680B > > and it was free. It was pretty well covered with dirt and crud. The action > > of the tubes sliding in and out to felt really gritty so I took it all apart > > and cleaned it up. It seems alright but the bottom leg section is bent > > enough to make compacting it all the way a little tough. Does anyone know if > > such parts are available or how much the leg section and foot might be? > > Cory > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and follow > the directions. -- The fastest way to get your question answered on the net is to post the wrong answer. Larry Colen [email protected] http://www.red4est.com/lrc -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
