Thanks Jim. That's the information I needed.
Paul
Jim Apilado wrote:
>
> I have an early LX that I purchased in 1983 or 84. I attached my 400T to
> the camera using Synch Cord B (hot shoe on LX to connector on the 400T). I
> set the shutter speed dial to Auto. The 400T is set to TTL Auto, and the
> Finder A Check switch is moved to the right to "on".
> Turning on the 400T, and after charging, the camera sets the X synch to 1/75
> sec. A red diode lights up at the synch speed. When I trip the shutter
> release and the flash goes off, if enough light is confirmed by the
> electronics to be good for exposure, the green light activates on the flash
> and the red synch indicator blinks a couple of times in the viewfinder of my
> LX indicating enough light was given.
>
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
