Hello all

I confess to having been lurking here for some time but I've finally got around
to subscribing.

I notice there are quite a number of list members from Oz and I'm another one -
and before you ask, yes, I do have Vegemite on toast for breakfast - it's one
of life's little pleasures......

About my photography - I haven't gone digital yet (apart from a point and shoot
'FinePix') and although lusting ater an *istD I don't expect to be digitally
enabled for some time unless prices unexpectedly plummet!  Currently I'm mainly
using an MZ5 and a Z20 but I'm a bit of a collector so I have a number of other
camera bodies to choose from including several screw mounts.

I enjoy landscape and wildflower photography and I'm hoping to get a  bit of
inspiration from the PAW entries of list members.

Anyway enoungh about me, 

Markus Maurer asked....

"is there a risk of overloading the connectors if I use both flash connectors
on a Pentax ME Super at the same
time, for ex. an Pentax AF280T on the hot shoe and some NonPentaxFlash on
the side connector ? And, how is it with
a Pentax SFX/SF1/SF7, can I also use both connectors at the same time?

Can I combine any brand of flash and beside the limited length of the cable
connection, is there a difference in quality
or else to a master/slave connection with a special slave adapter for the
second flash?"



I have some experience with this sort of set up as I use a dual flash
arrangement for wildflower 'macro' photography.  I've been using dual flash on
my Super A for many years with an AF280T attached to the hotshoe (via a 4P sync
cord B and hot shoe adapter F) and an AF200S connected to the PC socket via a
generic hot shoe cable.  Before I got the 200S I was using a generic brand
flash connected to the PC socket.  All I can say is that the setup has never
caused any problems.  

I've also used the same arrangement occasionally with an ME Super and SFXn - in
the latter case both flashes are attached via a hot shoe adapter as there's no
PC socket.  Again, no problems have been experienced.


Cheers

Brian Walters





Reply via email to