Hi Ken,
Thanks for the information.
I'll be working with him tomorrow and I'll try the ideas suggested on
this list plus a few from my personal brainstorming.
Dave
On 1/17/2016 5:47 PM, ken wrote:
Hi, He should direct jaws to use the internal card
for speech.
Use the mike output for earphone or plug your speaker amp in to it for
music.
If it's a desktop he'l have to have a external amp and speaker just to
hear jaws.
h t h
-----Original Message----- From: Dave Marthouse
Sent: Sunday, January 17, 2016 1:16 PM
To: PC Audio Discussion List
Subject: Re: Strange Problem
Hi Rich,
Thanks for the suggestion. I totally forgotten to check the sound card
configuration in Jaws.
For years I've used hardware synthesizers for speech output and as a
result never had such conflicts.
Thanks.
Dave
On 1/17/2016 1:11 PM, Smiling? wrote:
Change the Sound Card specifically for JAWS.
To gain focus on JAWS use the Insert+J keystroke.
Now arrow to Utilities submenu...
And arrow down to Sound Card submenu...
And change the selected sound card to be used for JAWS. I am sure
that it is still left to the default card (which is what Windows
makes the USB mic whenever it's installed)
-----Original Message-----
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of
Dave Marthouse
Sent: Sunday, January 17, 2016 9:59 AM
To: PC Audio Discussion List
Subject: Re: Strange Problem
Rich,
That's a good idea to check what you suggested. I'm doing the
troubleshooting remotely and the next time we talk I'll ask him for more
details about the mic. Thanks for the idea.
Dave
Dave
On 1/17/2016 12:27 PM, Rich De Steno wrote:
Is only speech lost or are all sounds lost? If the latter, then the
sound card maybe directing all sound to the microphone, which may have
a headphone jack on it.
Rich De Steno
On 1/17/2016 12:06 PM, Dave Marthouse wrote:
I am assisting a friend in getting his USB mic to work.
He is running Windows7 and Jaws16 with eloquence.
When the mic was plugged in for the first time we were informed that
the system was searching for drivers. The driver was found and
installed. I assume that the system recognized the mic as the
connection sound is played when the mic was plugged bin and another
sound is played when it's removed. When the mic is connected speech
is lost. When the plug is removed speech returns.
I have the feeling that this is some kind of driver issue.
If anyone can shed light on this one it would be appreciated.
--
Dave Marthouse
dmartho...@gmail.com
