It's not the voltage that is the problem usually, it's the connector that plugs into the wall socket.
Robert Nelson ----- Original Message ----- From: "DJ DOCTOR P" <djdoct...@att.net> To: "PC Audio Discussion List" <pc-audio@pc-audio.org> Sent: Thursday, June 10, 2010 7:19 AM Subject: Re: a good mixer for live broadcasting? High Mario and Robert, Two things here. #1. the M-Audio sound cards don't usually have microphone input jacks on them, so you will need some kind of a preamp to get the mike to work anyway. #2. If you end up getting electronic equipment from the United States, some of it usually have 105 to 215 volt switches on them. But if they don't, there is a power transformer that you can buy to step the 220 volts down to 110 volts. Hope this helps. My best regards. John. ----- Original Message ----- From: "Mario" <m...@tiscali.it> To: "PC Audio Discussion List" <pc-audio@pc-audio.org> Sent: Wednesday, June 09, 2010 4:16 PM Subject: Re: a good mixer for live broadcasting? > Hi Robert, I was tinking of using a mixer because I want to go on air, and > manage volume directly with faders, controlling music and microphone > separately. There is a way for doing this with my m-audio? Sorry but I'am > really confused. > > A presto, > Mario Loreti > Speaker pubblicitario e radiofonico > ----------------------------------------------------- > www.marioloreti.net > ----------------------------------------------------- > To unsubscribe from this list, send a blank email to: > pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
