wow! Well, you got it to work. You can always change the Output setting in Winamp from the Wave Out plug in to the Direct Sound one. I don't like using that one much myself, but it might not conflict with Total recorder.
~Ann ----- Original Message ----- From: "Marty Rimpau" <[EMAIL PROTECTED]> To: "PC audio discussion list. " <[email protected]> Sent: Saturday, October 29, 2005 7:24 PM Subject: Re: tried to record with total recorder scheduler > Hi Ann, I finally figured it out, because total recorder behaves the > way it does when you're making normal recordings, and by that I mean > that if a source like winamp or media player is started before total > recorder is, then, it won't record, because it sees a driver or > something like that, so, what I finally did was this, schedule the test > recording before a stream was started, and then leave total recorder > running, start the stream before the scheduled time, and then it > recorded the stream, because, in a sense, after you schedule a > recording with total recorder, it's as if, you're recording something, > even though you actually aren't, so now, I will use it to record at > least an hour of the antologias program from x e d x in Ensenada, if > they don't change the location of the stream for that station, as they > often do. > On Sat, 29 Oct 2005 18:24:13 -0400, Ann wrote: > >>Hi Marty, >> >>This might be a long message, because many things might have happened to >>cause this problem. I'm remembering why I switched from standard to Pro >>now >>as it's easier to schedule stream recording with Pro, but still ... >> >>Ok, let's see. If you were at your computer, and total recorder popped up >>and you closed it during the time it was to record, it is possible you >>inadvertently cancelled the recording by mistake when you closed the >>program. The program does not, I think, automatically default to running >>in >>your system tray when it is closed. >> >>Or, it is possible the wrong recording source was selected, and that is >>why >>there was no signal to be recorded. When you scheduled your recording, >>what >>did you have set under the Recording Source & Parameters dialogs, record >>from Software or from the soundboard? Usually, if you are recording a >>stream, the Software choice works quite well. The soundboard option lets >>you >>select various sound sources such as a secondary soundcard, if you have >>one, >>and various input sources from your soundcard such as the Line in, >>microphone, etc. I'd open Total recorder, and then open the scheduler and >>double check what is selected under Recording Source and Parameters, and >>try >>using the Software option before playing around with Soundboard, and all >>it's many choices. >> >>Try playing with it a bit, and making some test recordings to get really >>comfortable with the program before your next scheduled recording is to >>take >>place. . Total recorder can take a bit of getting used to, and I missed a >>couple of scheduled programs before I finally got mine completely >>straightened out. >> >>Feel free to write to me off list if you need any help. >> >>~Ann >> >> >>----- Original Message ----- >>From: "Marty Rimpau" <[EMAIL PROTECTED]> >>To: "pc-audio list" <[email protected]> >>Sent: Saturday, October 29, 2005 4:34 PM >>Subject: tried to record with total recorder scheduler >> >> >>> Hi all, I tried to record with total recorder scheduler, and I >>> understood from this list that you had to have the stream going before >>> the recording could be made, well, I scheduled the time, and had the >>> stream going, but no file got recorded, instead, it said no signal, and >>> I don't know why it did that, seeing that kerio personal firewall >>> didn't come up and warn me about a connection, so, what might have I >>> done wrong? I did close total recorder, because I didn't know if it >>> had to be running, because ftp voyager doesn't need to be running for >>> its' scheduler to work, so I had total recorder scheduler start in ms >>> config, but when I checked what I thought was a file, there was none, >>> and, in the scheduler, it gave the name and location of the file, but >>> said, no signal, so what went wrong, because it was acting the way >>> total recorder usually does when winamp is started before a stream, by >>> not recording, yet, with standard edition, I was told I had to have the >>> stream up before total recorder could record the stream, and the radio >>> button was set to record the file, so is the trick to leave total >>> recorder running until the event is over, or will the scheduler take >>> care of things, because, total recorder did come up during the >>> scheduled time, but it was as if, the scheduler totally ignored the >>> part about recording the file I wanted. This with total recorder >>> version 5.3, window-eyes 5.5 beta2, windows 98 se, 192 megs of ram, and >>> a 400 megs processor. >>> >>> Marty >>> >>> >>> >>> _______________________________________________ >>> PC-Audio List Help, Guidelines, Archives and more... >>> http://www.pc-audio.org >>> >>> To unsubscribe from this list, send a blank email to: >>> [EMAIL PROTECTED] >>> >>> This list is a service of MosenExplosion.com. To see what other lists we >>> offer, visit us on the web at http://www.MosenExplosion.com >>> >>> >> >> >>_______________________________________________ >>PC-Audio List Help, Guidelines, Archives and more... >>http://www.pc-audio.org >> >>To unsubscribe from this list, send a blank email to: >>[EMAIL PROTECTED] >> >>This list is a service of MosenExplosion.com. To see what other lists we >>offer, visit us on the web at http://www.MosenExplosion.com >> > > Marty > > _______________________________________________ > PC-Audio List Help, Guidelines, Archives and more... > http://www.pc-audio.org > > To unsubscribe from this list, send a blank email to: > [EMAIL PROTECTED] > > This list is a service of MosenExplosion.com. To see what other lists we > offer, visit us on the web at http://www.MosenExplosion.com > > _______________________________________________ PC-Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] This list is a service of MosenExplosion.com. To see what other lists we offer, visit us on the web at http://www.MosenExplosion.com
