Dear Paraview developers, I have a question about how to convert point data (vtk file) to 2d plane data. Actually, originally, I was working with vtk file. Then I use the extract selection to select some cells in the original model. In order to process the data of the selected cells, I save the data as the csv file. Then I use Matlab to do some calculation on the data in the csv file. After that, I open the modified csv file by using Paraview directly. And now, I only have spreadsheet view. After searching some online information, I use TabletoPoint to convert the data to point data. However, I still want to view them as the 2d cell. So I use point interpolation to try to convert the points data to 2d plane cell data. However, It doesn't work.
So my question is, how to show the data value in the space between different 2d points data by using point interpolation? Or is there any way that I can process the original data in the 2d cell plane mode without saving it as the csv file? Best, Teng Li Teng Li Master Candidate in Structures Department of Civil and Environmental Engineering University of Illinois at Urbana-Champaign 205 North Mathews Ave, Urbana, IL. 61801 Phone:(217)8196210, Email: [email protected]
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
