Hi,
I have two small problems and since I am just a newbie I really appreciate any
help.
In the first piece I want to create only the geometry and in the second piece
some points (these are gauss points actually) and with some data.
First problem is, paraview does not see “strain” when it is defined as given
below. However, if I swap the point dataset to the first piece it works: on the
wrong points of course.
Second, it is apparently not possible to show the geometry and point values at
the same time. Do you think I need to define two separate files and "light them
up" separately on main paraview screen?
Thanks a bunch!
Ersan
<?xml version="1.0"?>
<VTKFile type="UnstructuredGrid" version="0.1" byte_order="LittleEndian">
<UnstructuredGrid>
<Piece NumberOfPoints="4" NumberOfCells="1">
<Points>
<DataArray type="Float64" NumberOfComponents="3" format="ascii">
0.00 0.00 0.00 1.00 0.00 0.00 1.00 1.00 0.00 0.00 1.00 0.00
</DataArray>
</Points>
<Cells>
<DataArray type="Int64" Name="connectivity" format="ascii">
0 1 2 3
</DataArray>
<DataArray type="Int64" Name="offsets" format="ascii">
4
</DataArray>
<DataArray type="UInt8" Name="types" format="ascii">
9
</DataArray>
</Cells>
<PointData Tensors="strain">
</PointData>
<CellData>
</CellData>
</Piece>
<Piece NumberOfPoints="4" NumberOfCells="0">
<Points>
<DataArray type="Float64" NumberOfComponents="3" format="ascii">
0.25 0.25 0.00 0.75 0.25 0.00 0.75 0.75 0.00 0.25 0.75 0.00
</DataArray>
</Points>
<Cells>
<DataArray type="Int64" Name="connectivity" format="ascii">
</DataArray>
<DataArray type="Int64" Name="offsets" format="ascii">
</DataArray>
<DataArray type="UInt8" Name="types" format="ascii">
</DataArray>
</Cells>
<PointData Tensors="strain">
<DataArray type="Float64" Name="strain" NumberOfComponents="9"
format="ascii">
2.0 3.0 0.0
3.0 2.0 0.0
0.0 0.0 0.0
1.0 2.0 0.0
2.0 1.0 0.0
0.0 0.0 0.0
5.0 4.0 0.0
4.0 1.0 0.0
0.0 0.0 0.0
3.0 6.0 0.0
6.0 7.0 0.0
0.0 0.0 0.0
</DataArray>
</PointData>
<CellData>
</CellData>
</Piece>
</UnstructuredGrid>
</VTKFile>
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
