Mike,
Your state file doesn't work without the data files that go along with it.
That said, here is how you can do it:
1. Load your .dat file and use the TableToPoints filter to create points from
the data table -- select your x, y, z appropriately
2. Load your CFD data file
3. Select your CFD data file and then do:
a. ResampleWithDataset -- select the CFD data as the Input and the
TableToPoints as the Source
4. This will give you the data interpolated to the points in the table, if you
want a plane from this data, apply the Delaunay2D filter and select
Best-Fitting Plane (if the points are not X-Y points only).
That should give you the data from your CFD simulation on the same plane as
your PIV data.
I see you are at GT -- let me know if you are still unclear on these steps and
would like to talk in person.
Tim
________________________________
From: ParaView <[email protected]> on behalf of Mike Tree
<[email protected]>
Sent: Tuesday, November 17, 2015 5:32 PM
To: [email protected]
Subject: [Paraview] Experimental Data Interpolate/Extrapolate to Custom Volume
Mesh
I have three planes of experimental PIV data with velocity point data in .dat
format loaded in Paraview. I am hoping to use these planes to
interpolate/extrapolate velocity values onto a custom volumetric mesh (i.e.
from a CFD simulation) to compare experimental results with simulation results
in hopes of validating the simulation. I have attached my Paraview state file.
Any help will be much appreciated.
Thanks,
-MT
--
Mike Tree, PhD Student
Cardiovascular Fluid Mechanics Laboratory
Georgia Institute of Technology
Atlanta, GA
[email protected]<mailto:[email protected]>
678-249-0922
[https://mailfoogae.appspot.com/t?sender=adHJlZW0yMkBnbWFpbC5jb20%3D&type=zerocontent&guid=82092feb-f151-4b75-8a88-41da2f2b684b]?
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
