i have launch from my Palmoscywing and this it's the result
(I have transcribed all )
$ ./configure --enable-palmos
loading cache ./config.cache
checking for m68k-palmos-gcc... /usr/bin/m68k-palmos-gcc
checking for m68k-palmos-gcc... /usr/bin/m68k-palmos-obj-res
checking for m68k-palmos-gcc... /usr/bin/m68k-palmos-as
checking for m68k-palmos-gcc... /usr/bin/multigen
checking for pilrc..no
configure: error: Unable to find pilrc
what it could be???
thanks
(I have transcribed all )
$ ./configure --enable-palmos
loading cache ./config.cache
checking for m68k-palmos-gcc... /usr/bin/m68k-palmos-gcc
checking for m68k-palmos-gcc... /usr/bin/m68k-palmos-obj-res
checking for m68k-palmos-gcc... /usr/bin/m68k-palmos-as
checking for m68k-palmos-gcc... /usr/bin/multigen
checking for pilrc..no
configure: error: Unable to find pilrc
what it could be???
thanks
2006/6/28, Ton van Overbeek <[EMAIL PROTECTED]>:
On 2006-06-28, marco roner <[EMAIL PROTECTED]> wrote:
> ------=_Part_13171_31388786.1151478044004
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline
>
> I don't know , it' an assembler messages
> this is what write the console when I make built
>
> m68k-palmos-gcc -c -D__PALMOS__=0x05000000 -I"C:/Programmi/PalmSource/Palm
> OS Developer Suite/PalmOSTools/include/stlport" -O0 -g -fexceptions -UNDEBUG
> -Wall -palmos5r4 -o src/Strip/Strip.o ../src/Strip/Strip.c
> /cygdrive/c/DOCUME~1/marco/IMPOST~1/Temp/ccLJYs9F.s: Assembler messages:
> /cygdrive/c/DOCUME~1/marco/IMPOST~1/Temp/ccLJYs9F.s:3469: Error: Signed
> .word overflow; switch may be too large; 37784 at 0xfa
> /cygdrive/c/DOCUME~1/marco/IMPOST~1/Temp/ccLJYs9F.s:3632: Error: Signed
> .word overflow; switch may be too large; 37784 at 0x224
Source file is ../src/Strip/Strip.c. As far as I can tell there are no
large switch statements in that file.
I have not tried to import it in PODS.
I have my own Cygwin installation including prc-tools and used the PODS
custom install to point it to my own Cygwin installation.
My advice is to try to compile it with the command line tools outside PODS
using configure and make. As far as I know the PalmOSCygwintools should
contain everything you need.
Good luck.
Ton van Overbeek
--
For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
-- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
