Thanx Steve... That's exactly what I wanted to hear...
Steve Sabram wrote: > Unfortunately, there isn't a reliable way to handle this in software on the > current PalmOS. There are several well documented by > third party tricks to do this but I highly advice against it if this is > production code. > > My timing rule of thumb has been if you want to do anything with a precision > below 10ms, you need to break out the soldering iron. > I have seen devices like a custom microcontroller configuration or a custom > Springboard module developed to handle just this > situation. You may want to consider getting a hold of the modem plastic > cases and developing a microcontroller board that can read > the modem button at a very reliable rate for this. > > Steve > > Patrick Ouellet wrote: > > > Ok Still on my Serial comm problem > > > > Ok tell me if im wrong but... > > On palm device delay are calculated in ticks per second... > > And again tell me if Im wrong, > > but 1 ticks is around 6ms for my palm 3e > > > > Now is it possible to make a delay of 0.33 ticks > > or 2ms > > > > Thanx > > > > -- > > For information on using the Palm Developer Forums, or to unsubscribe, > > please see http://www.palmos.com/dev/tech/support/forums/ -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
