https://bugzilla.redhat.com/show_bug.cgi?id=2258110
--- Comment #8 from Stephen John Smoogen <[email protected]> --- So phytool does not have a -h or --help but it outputs the following when run with no arguments. ``` Usage: phytool read IFACE/ADDR/REG phytool write IFACE/ADDR/REG <0-0xffff> phytool print IFACE/ADDR[/REG] Clause 22: ADDR := <0-0x1f> REG := <0-0x1f> Clause 45 (not supported by all MDIO drivers): ADDR := PORT:DEV PORT := <0-0x1f> DEV := <0-0x1f> REG := <0-0xffff> Examples: phytool read eth0/0:4/0x1000 phytool write eth0/0xa/0 0x1140 phytool print eth0/0x1c The `read` and `write` commands are simple register level accessors. The `print` command will pretty-print a register. When using the `print` command, the register is optional. If left out, the most common registers will be shown. ``` which matches what is in the README.md. I would be interested in how a man page could be made from this. -- You are receiving this mail because: You are always notified about changes to this product and component You are on the CC list for the bug. https://bugzilla.redhat.com/show_bug.cgi?id=2258110 Report this comment as SPAM: https://bugzilla.redhat.com/enter_bug.cgi?product=Bugzilla&format=report-spam&short_desc=Report%20of%20Bug%202258110%23c8 -- _______________________________________________ package-review mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected] Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
