Hi Keith
> When I set the master_ip as the Cluster IP, Postgres does not come up because
> it is looking for the virtual IP that is dependant of Postgres master. Kind
> of a catch 22?
Slave's PostgreSQL ?
Slave connects to Virtual IP which is started on Master,
so it's normal.
Please check pg_hba.conf if Slave can't connect to Master through ClusterIP.
Pacemaker and PostgreSQL work as follows.
== You start Pacemaker on test-db1 ==
1. Pacemkaer starts　PostgreSQL as Slave on test-db1
2. Pacemaker promotes PostgreSQL on test-db1
Note: If pgsql-data-status is not "LATEST" or "STREAMING|SYNC", RA
can't promote it.
3. Pacemaker starts ClusterIP on test-db1
== You sync data (from test-db1 to test-db2) ==
== You start Pacemaker on test-db2 ==
4. Pacemaker start PostgreSQL as Slave on test-db2
5. PostgreSQL connects to test-db1's ClusterIP
crm_mon shows as follows.
# crm_mon -Af
-----------
Online: [ test-db1 test-db2 ]
ClusterIP (ocf::heartbeat:IPaddr2): Started test-db1
Master/Slave Set: msPostgresql
Masters: [ test-db1 ]
Slaves: [ test-db2 ]
Node Attributes:
* Node test-db1:
+ master-pgsql:0 : 1000
+ pgsql-data-status : LATEST
+ pgsql-master-baseline : 0000000024028270
+ pgsql-status : PRI
* Node test-db2:
+ master-pgsql:1 : 100
+ pgsql-data-status : STREAMING|SYNC
+ pgsql-status : HS:sync
Migration summary:
* Node test-db1:
* Node test-db2:
-----------
Regards,
Takatoshi MATSUO
2013/1/12 Keith Ouellette <keith.ouelle...@airgas.com>:
> When I set the master_ip as the Cluster IP, Postgres does not come up because
> it is looking for the virtual IP that is dependant of Postgres master. Kind
> of a catch 22?
>
> When I configure the master_ip as the IP of one of the servers, Postgres only
> comes up if that one is available. I will try the repuser.
>
> Thanks,
> Keith
>
>
> ________________________________________
> From: Takatoshi MATSUO [matsuo....@gmail.com]
> Sent: Friday, January 11, 2013 6:41 PM
> To: The Pacemaker cluster resource manager
> Subject: Re: [Pacemaker] Postresql streaming replication support
>
> Hi Keith
>
> Can Slave access ClusterIP ?
> And can Master receive it ?
>
> You can change "user=postgres" using repuser parameter.
> Please use .pgpass file to change password.
>
> Thanks,
> Takatoshi MATSUO
>
> 2013/1/12 Keith Ouellette <keith.ouelle...@airgas.com>:
>> Thank you again. It looks like it is trying now, but when I use the virtual
>> IP I get the following in the postgres log (../pg_log/):
>>
>> cp: cannot stat '/opt/PostgreSQL/9.2/data/archive/000000010000000100000021':
>> No such file or directory
>> cp: cannot stat '/opt/PostgreSQL/9.2/data/archive/000000010000000100000021':
>> No such file or directory
>> cp: cannot stat '/opt/PostgreSQL/9.2/data/archive/00000002.history': No such
>> file or directory
>> 2013-01-11 10:22:06 EST FATAL: could not connect to the primary server:
>> could not connect to server: No route to host
>> Is the server running on host "172.16.0.110" and accepting
>> TCP/IP connections on port 5432?
>>
>> If I put the IP of one fo the servers (former master before pacemaker), I
>> get the following:
>>
>> cp: cannot stat '/opt/PostgreSQL/9.2/data/archive/000000010000000100000021':
>> No such file or directory
>> cp: cannot stat '/opt/PostgreSQL/9.2/data/archive/000000010000000100000021':
>> No such file or directory
>> cp: cannot stat '/opt/PostgreSQL/9.2/data/archive/00000002.history': No such
>> file or directory
>> 2013-01-11 10:22:06 EST FATAL: could not connect to the primary server:
>> could not connect to server: No route to host
>> Is the server running on host "172.16.0.110" and accepting
>> TCP/IP connections on port 5432?
>>
>> So I gues there are two issues, one is it appears that postgres will not
>> come up unless the IP is in place?? Second is where do you define the
>> user=postgres and password=<password>. Shold that be in the
>> primary_conninfo_opt along with the keepalives?
>>
>> Thanks again for your help. it is greatly appreciated.
>>
>> Keith
>> ________________________________________
>> From: Takatoshi MATSUO [matsuo....@gmail.com]
>> Sent: Thursday, January 10, 2013 7:20 PM
>> To: The Pacemaker cluster resource manager
>> Subject: Re: [Pacemaker] Postresql streaming replication support
>>
>> Hi Keith
>>
>>> So the master-ip is the virtual IP?
>>
>> Yes.
>> If Master is switched, static IP is changed.
>> So it needs virtual IP or multiple instance_attributes.
>> http://clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Pacemaker_Explained/_using_rules_to_control_resource_options.html
>>
>> Regards,
>> Takatoshi MATSUO
>>
>> 2013/1/10 Keith Ouellette <keith.ouelle...@airgas.com>:
>>> Thank you again, So the master-ip is the virtual IP? I was thinking that
>>> was the IP address of the master database server. Thank you for this. I am
>>> going to try this and see if I can get it to function.
>>>
>>> Thanks,
>>> Keith
>>>
>>>
>>> ________________________________________
>>> From: Takatoshi MATSUO [matsuo....@gmail.com]
>>> Sent: Wednesday, January 09, 2013 11:50 PM
>>> To: The Pacemaker cluster resource manager
>>> Subject: Re: [Pacemaker] Postresql streaming replication support
>>>
>>> Hi Keith
>>>
>>> Do you want to start "ClusterIP" on Slave ?
>>> It seems that ClusterIP is based on vip-slave of my sample configuration.
>>>
>>> If you would like to start it on Master, you need to customize "vip-master".
>>> And pgsql's master-ip parameter needs the IP of vip-master which
>>> combines with vip-rep.
>>>
>>> like this
>>> ----------------------------------------------------
>>> property \
>>> no-quorum-policy="ignore" \
>>> stonith-enabled="false" \
>>> crmd-transition-delay="0s"
>>>
>>> rsc_defaults \
>>> resource-stickiness="INFINITY" \
>>> migration-threshold="1"
>>>
>>> ms msPostgresql pgsql \
>>> meta \
>>> master-max="1" \
>>> master-node-max="1" \
>>> clone-max="2" \
>>> clone-node-max="1" \
>>> notify="true"
>>>
>>> primitive ClusterIP ocf:heartbeat:IPaddr2 \
>>> params \
>>> ip="172.16.0.110" \
>>> cidr_netmask="24" \
>>> op start timeout="60s" interval="0s" on-fail="stop" \
>>> op monitor timeout="60s" interval="10s" on-fail="restart" \
>>> op stop timeout="60s" interval="0s" on-fail="block"
>>>
>>> primitive pgsql ocf:heartbeat:pgsql \
>>> params \
>>> pgctl="/opt/PostgreSQL/9.2/bin/pg_ctl" \
>>> psql="/opt/PostgreSQL/9.2/bin/psql" \
>>> pgdata="/opt/PostgreSQL/9.2/data/" \
>>> start_opt="-p 5432" \
>>> rep_mode="sync" \
>>> node_list="test-db1 test-db2" \
>>> restore_command="cp /opt/PostgreSQL/9.2/data/archive/%f %p" \
>>> primary_conninfo_opt="keepalives_idle=60 keepalives_interval=5
>>> keepalives_count=5" \
>>> master_ip="172.16.0.110" \
>>> stop_escalate="0" \
>>> op start timeout="60s" interval="0s" on-fail="restart" \
>>> op monitor timeout="60s" interval="11s" on-fail="restart" \
>>> op monitor timeout="60s" interval="10s" on-fail="restart"
>>> role="Master" \
>>> op promote timeout="60s" interval="0s" on-fail="restart" \
>>> op demote timeout="60s" interval="0s" on-fail="block" \
>>> op stop timeout="60s" interval="0s" on-fail="block" \
>>> op notify timeout="60s" interval="0s"
>>>
>>> colocation rsc_colocation-1 inf: ClusterIP msPostgresql:Master
>>>
>>> order rsc_order-1 0: msPostgresql:promote ClusterIP:start
>>> symmetrical=false
>>> order rsc_order-2 0: msPostgresql:demote ClusterIP:stop
>>> symmetrical=false
>>> ----------------------------------------------------
>>>
>>> Please see this to operate it.
>>> https://github.com/t-matsuo/resource-agents/wiki/Operation-examples-for-none-shared-wal-archives-environment
>>>
>>> --
>>> Takatoshi
>>>
>>> 2013/1/10 Keith Ouellette <keith.ouelle...@airgas.com>:
>>>> Thank you. I wish I could have seen the presentation. In my case, the two
>>>> nodes are in two different US cities connected by a bridged VPN. I do not
>>>> have the ability to have separate connection for pacemaker, replication
>>>> and access.
>>>>
>>>>
>>>>
>>>> I tried to scale the configuration back to support one VIP, Here is the
>>>> XML output of what I tried, but the service does not even come up.
>>>>
>>>> <resources>
>>>> <primitive class="ocf" id="ClusterIP" provider="heartbeat"
>>>> type="IPaddr2">
>>>> <meta_attributes id="ClusterIP-meta_attributes">
>>>> <nvpair id="ClusterIP-meta_attributes-target-role"
>>>> name="target-role" value="Started"/>
>>>> </meta_attributes>
>>>> <operations id="ClusterIP-operations">
>>>> <op id="ClusterIP-op-monitor-10s" interval="10s" name="monitor"
>>>> timeout="20s"/>
>>>> </operations>
>>>> <instance_attributes id="ClusterIP-instance_attributes">
>>>> <nvpair id="ClusterIP-instance_attributes-ip" name="ip"
>>>> value="172.16.0.110"/>
>>>> <nvpair id="ClusterIP-instance_attributes-cidr_netmask"
>>>> name="cidr_netmask" value="24"/>
>>>> </instance_attributes>
>>>> </primitive>
>>>> <primitive class="ocf" id="pgsql" provider="heartbeat" type="pgsql">
>>>> <meta_attributes id="pgsql-meta_attributes">
>>>> <nvpair id="pgsql-meta_attributes-target-role"
>>>> name="target-role" value="Started"/>
>>>> </meta_attributes>
>>>> <operations id="pgsql-operations">
>>>> <op id="pgsql-op-start-0" interval="0" name="start"
>>>> on-fail="restart" timeout="120"/>
>>>> <op id="pgsql-op-monitor-7" interval="7" name="monitor"
>>>> on-fail="restart" timeout="60"/>
>>>> <op id="pgsql-op-monitor-Master-60" interval="60" name="monitor"
>>>> on-fail="restart" role="Master" timeout="30"/>
>>>> <op id="pgsql-op-promote-0" interval="0" name="promote"
>>>> on-fail="restart" timeout="60"/>
>>>> <op id="pgsql-op-stop-0" interval="0" name="stop"
>>>> on-fail="block" timeout="60"/>
>>>> <op id="pgsql-op-demote-0" interval="0" name="demote"
>>>> on-fail="block" timeout="60"/>
>>>> <op id="pgsql-op-notify-0" interval="0" name="notify"
>>>> timeout="60"/>
>>>> </operations>
>>>> <instance_attributes id="pgsql-instance_attributes">
>>>> <nvpair id="pgsql-instance_attributes-pgctl" name="pgctl"
>>>> value="/opt/PostgreSQL/9.2/bin/pg_ctl"/>
>>>> <nvpair id="pgsql-instance_attributes-psql" name="psql"
>>>> value="/opt/PostgreSQL/9.2/bin/psql"/>
>>>> <nvpair id="pgsql-instance_attributes-pgdata" name="pgdata"
>>>> value="/opt/PostgreSQL/9.2/data/"/>
>>>> <nvpair id="pgsql-instance_attributes-start_opt"
>>>> name="start_opt" value="-p 5432"/>
>>>> <nvpair id="pgsql-instance_attributes-rep_mode" name="rep_mode"
>>>> value="sync"/>
>>>> <nvpair id="pgsql-instance_attributes-node_list"
>>>> name="node_list" value="test-db1 test-db2"/>
>>>> <nvpair id="pgsql-instance_attributes-restore_command"
>>>> name="restore_command" value="cp /opt/PostgreSQL/9.2/data/archive/%f %p"/>
>>>> <nvpair id="pgsql-instance_attributes-primary_conninfo_opt"
>>>> name="primary_conninfo_opt" value="keepalives_idle=60
>>>> keepalives_interval=5 keepalives_count=5"/>
>>>> <nvpair id="pgsql-instance_attributes-master_ip"
>>>> name="master_ip" value="172.16.0.111"/>
>>>> <nvpair id="pgsql-instance_attributes-stop_escalate"
>>>> name="stop_escalate" value="0"/>
>>>> </instance_attributes>
>>>> </primitive>
>>>> </resources>
>>>> <constraints>
>>>> <rsc_location id="rsc-location-1" rsc="ClusterIP">
>>>> <rule id="rsc-location-1-rule" score="200">
>>>> <expression attribute="pgsql-status"
>>>> id="rsc-location-1-rule-pgsql-status" operation="eq" value="HS:sync"/>
>>>> </rule>
>>>> <rule id="rsc-location-1-rule-0" score="100">
>>>> <expression attribute="pgsql-status"
>>>> id="rsc-location-1-rule-0-pgsql-status" operation="eq" value="PRI"/>
>>>> </rule>
>>>> <rule id="rsc-location-1-rule-1" score="-INFINITY">
>>>> <expression attribute="pgsql-status"
>>>> id="rsc-location-1-rule-1-pgsql-status" operation="not_defined"/>
>>>> </rule>
>>>> <rule boolean-op="and" id="rsc-location-1-rule-2"
>>>> score="-INFINITY">
>>>> <expression attribute="pgsql-status"
>>>> id="rsc-location-1-rule-2-pgsql-status" operation="ne" value="HS:sync"/>
>>>> <expression attribute="pgsql-status"
>>>> id="rsc-location-1-rule-2-pgsql-status-0" operation="ne" value="PRI"/>
>>>> </rule>
>>>> </rsc_location>
>>>> <rsc_location id="rsc-location-2" rsc="pgsql">
>>>> <rule id="rsc-location-2-rule" role="Master" score="200">
>>>> <expression attribute="#uname" id="rsc-location-2-rule-.uname"
>>>> operation="eq" value="test-db1"/>
>>>> </rule>
>>>> <rule id="rsc-location-2-rule-0" role="Master" score="100">
>>>> <expression attribute="#uname" id="rsc-location-2-rule-0-.uname"
>>>> operation="eq" value="test-db2"/>
>>>> </rule>
>>>> <rule id="rsc-location-2-rule-1" role="Master" score="-INFINITY">
>>>> <expression attribute="fail-count-ClusterIP"
>>>> id="rsc-location-2-rule-1-fail-count-ClusterIP" operation="defined"/>
>>>> </rule>
>>>> <rule boolean-op="or" id="rsc-location-2-rule-2" score="-INFINITY">
>>>> <expression attribute="default_ping_set"
>>>> id="rsc-location-2-rule-2-default_ping_set" operation="not_defined"/>
>>>> <expression attribute="default_ping_set"
>>>> id="rsc-location-2-rule-2-default_ping_set-0" operation="lt" value="100"/>
>>>> </rule>
>>>> </rsc_location>
>>>> <rsc_colocation id="rsc_colo-1" rsc="pgsql" score="INFINITY"
>>>> with-rsc="ClusterIP"/>
>>>> <rsc_order first="ClusterIP" first-action="start" id="rsc_order_1"
>>>> symmetrical="false" then="pgsql" then-action="promote"/>
>>>> </constraints>
>>>> Any ideas?
>>>>
>>>> Thanks,
>>>> Keith
>>>>
>>>>
>>>> ________________________________________
>>>> From: Takatoshi MATSUO [matsuo....@gmail.com]
>>>> Sent: Wednesday, January 09, 2013 8:23 PM
>>>> To: The Pacemaker cluster resource manager
>>>> Subject: Re: [Pacemaker] Postresql streaming replication support
>>>>
>>>> Hi Keith
>>>>
>>>> I don't write detailed documentation.
>>>> But I spoke about it using this slide.
>>>>
>>>> http://linux-ha.sourceforge.jp/wp/archives/3404
>>>>
>>>> Did you read it?
>>>>
>>>> I translated it into English.
>>>> Please click "English version is here : PG-study" to download it.
>>>> (Sorry for bad translation)
>>>>
>>>>
>>>> Regards,
>>>> Takatoshi MATSUO
>>>>
>>>>
>>>> 2013/1/10 Keith Ouellette <keith.ouelle...@airgas.com>
>>>>>
>>>>> Jesse,
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Thank you for the quick response. Actually yes, the example given at
>>>>> the link below shows several connections between the two (cross-overs).
>>>>> We only have one connection between the two nodes with a bridged VPN.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> The example has an S-LAN, D-LAN and an IC-LAN. I only have one LAN
>>>>> available to me with a bridge VPN between the two routers. I tried to
>>>>> skinny the configuration to a single virtual IP primitive called
>>>>> "ClusterIP", but I think there are some other dependancies in the example
>>>>> that I am not seeing as it did not work, meaning the resources did not
>>>>> start. Is there another place I can go that may provide more detailed
>>>>> documentation that may help me with my configuration?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Keith
>>>>>
>>>>> ________________________________
>>>>> From: Jesse Hathaway [jesse.hatha...@getbraintree.com]
>>>>> Sent: Wednesday, January 09, 2013 2:09 PM
>>>>> To: The Pacemaker cluster resource manager; Jesse Hathaway
>>>>> Subject: Re: [Pacemaker] Postresql streaming replication support
>>>>>
>>>>> On Wed, Jan 9, 2013 at 12:56 PM, Keith Ouellette
>>>>> <keith.ouelle...@airgas.com> wrote:
>>>>>>
>>>>>> Now I am trying to get that integrated with pacemaker. In my searches,
>>>>>> I see that pacemaker with DRBD seems to be the prevelant implementation
>>>>>> an most documentation was written around that. However, due to our
>>>>>> network conditions, I am looking for information on doing this with WAL.
>>>>>> I did find a resource agent that was wirtten for what I am doing
>>>>>> (https://github.com/t-matsuo/resource-agents/wiki/Resource-Agent-for-PostgreSQL-9.1-streaming-replication).
>>>>>> The issue is the example if complex with the explanation written only
>>>>>> toward that example. Is there another place that I can get documentation
>>>>>> on this resource agent? Is there another way that this could be
>>>>>> accmoplished that someone has tried?
>>>>>
>>>>> Keith we are using the above resource agent in production with streaming
>>>>> replication. Do you have any specific questions about its usage?
>>>>>
>>>>> --
>>>>> Jesse Hathaway, Systems Engineer
>>>>> Braintree
>>>>> 917-418-8423
>>>>>
>>>>> _______________________________________________
>>>>> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
>>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>>
>>>>> Project Home: http://www.clusterlabs.org
>>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>>> Bugs: http://bugs.clusterlabs.org
>>>>>
>>>>
>>>> _______________________________________________
>>>> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>
>>>> Project Home: http://www.clusterlabs.org
>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>> Bugs: http://bugs.clusterlabs.org
>>>> _______________________________________________
>>>> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>
>>>> Project Home: http://www.clusterlabs.org
>>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>> Bugs: http://bugs.clusterlabs.org
>>>
>>> _______________________________________________
>>> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>
>>> Project Home: http://www.clusterlabs.org
>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://bugs.clusterlabs.org
>>> _______________________________________________
>>> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>
>>> Project Home: http://www.clusterlabs.org
>>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>> Bugs: http://bugs.clusterlabs.org
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
> _______________________________________________
> Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
_______________________________________________
Pacemaker mailing list: Pacemaker@oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker
Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://bugs.clusterlabs.org
