On 3/10/2010 at 09:48 AM, Werner <wkuba...@co.sanmateo.ca.us> wrote:
> I have a problem with setting up a simple two node cluster with an IP address
> that should fail over.
>
> The two systems run SLES 11 with HAE. I have done this configuration with
> two
> virtual machines and it works just fine in this environment. However, when
> I do
> the exact same configuration on the real (physical) systems it fails. This
> is
> what I get:
>
> r...@imsrcdbdgrid2:~# crm configure show
> node imsrcdbdgrid1
> node imsrcdbdgrid2
> primitive ClusterIP ocf:heartbeat:IPadd2 \
^IPaddr2
Looks like a typo - if your configuration is missing that 'r' character,
that'll be the source of your problem (although, if the crm shell let you
create a primitive using an RA that doesn't exist, that sounds like a bug).
> r...@imsrcdbdgrid2:~# crm_verify -L -V
> crm_verify[26812]: 2010/03/09_14:42:44 ERROR: unpack_rsc_op: Hard error -
> ClusterIP_monitor_0 failed with rc=5: Preventing ClusterIP from re-starting
> on
> imsrcdbdgrid1
rc=5 means "not installed", which you'll get if the RA explicitly returns
that error code, or if the RA itself doesn't exist.
Regards,
Tim
--
Tim Serong <tser...@novell.com>
Senior Clustering Engineer, OPS Engineering, Novell Inc.
_______________________________________________
Pacemaker mailing list
Pacemaker@oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker
