On 10/15/2009 02:48 PM, Johan Verrept wrote: > > Hello, > > I don't understand why heartbeat/pacemaker does not want to start. > This is all logs there are... > > 14:37:46 heartbeat [3010]: info: Version 2 support: yes > 14:37:46 heartbeat [3010]: WARN: File /ub/etc/ha.d//haresources exists. do you want to use v1 or v2?
> 14:37:46 heartbeat [3010]: WARN: This file is not used because crm is > enabled > 14:37:46 heartbeat [3010]: WARN: Core dumps could be lost if multiple > dumps occur. > 14:37:46 heartbeat [3010]: WARN: Consider setting non-default value > in /proc/sys/kernel/core_pattern (or equivalent) for maximum > supportability > 14:37:46 heartbeat [3010]: WARN: Consider > setting /proc/sys/kernel/core_uses_pid (or equivalent) to 1 for maximum > supportability > 14:37:46 heartbeat [3010]: WARN: Logging daemon is disabled --enabling > logging daemon is recommended > 14:37:46 heartbeat [3010]: info: ************************** > 14:37:46 heartbeat [3010]: info: Configuration validated. Starting > heartbeat 3.0.0 > 14:37:46 heartbeat [3011]: info: heartbeat: version 3.0.0 > 14:37:46 heartbeat [3011]: info: Heartbeat generation: 1255609327 > 14:37:46 heartbeat [3011]: info: glib: ucast: write socket priority set > to IPTOS_LOWDELAY on eth0 > 14:37:46 heartbeat [3011]: info: glib: ucast: bound send socket to > device: eth0 > 14:37:46 heartbeat [3011]: info: glib: ucast: bound receive socket to > device: eth0 > 14:37:46 heartbeat [3011]: info: glib: ucast: started on port 694 > interface eth0 to 192.168.250.233 > 14:37:46 heartbeat [3011]: info: glib: ucast: write socket priority set > to IPTOS_LOWDELAY on eth2 > 14:37:46 heartbeat [3011]: info: glib: ucast: bound send socket to > device: eth2 > 14:37:46 heartbeat [3011]: info: glib: ucast: bound receive socket to > device: eth2 > 14:37:46 heartbeat [3011]: info: glib: ucast: started on port 694 > interface eth2 to 192.168.167.2 > 14:37:46 heartbeat [3011]: ERROR: glib: cannot lock line /dev/ttyS0 > 14:37:46 heartbeat [3011]: ERROR: make_io_childpair: cannot open > serial /dev/ttyS0 please fix this ERROR and retry. cheers, raoul -- ____________________________________________________________________ DI (FH) Raoul Bhatia M.Sc. email. [email protected] Technischer Leiter IPAX - Aloy Bhatia Hava OEG web. http://www.ipax.at Barawitzkagasse 10/2/2/11 email. [email protected] 1190 Wien tel. +43 1 3670030 FN 277995t HG Wien fax. +43 1 3670030 15 ____________________________________________________________________ _______________________________________________ Pacemaker mailing list [email protected] http://oss.clusterlabs.org/mailman/listinfo/pacemaker
