Am Donnerstag, 1. Oktober 2009 16:49:59 schrieb Michael Schwartzkopff: > Hi, > > I am experimenting a little bit with the iSCSITarget RA, but without > success. My resource is defined like: > > primitive resIET ocf:heartbeat:iSCSITarget \ > params additional_parameters="Path=/dev/drbd0" iqn="iqn.1.2" > > The problem ist that the resource fails at start. > > Looking through the RA I found the follwing commands beeing executed: > ietadm --op new --tid=1 --params Name=iqn.1.2 > > This is OK. > > the next command is: > ietadm --op update --tid=1 --params Path=/dev/drbd0 > > Here the log file says: > Command output: Unknown parameter "Path" > > When I enter the command manually I get the same error.
The command ietadm --op new --tid=1 --lun=0 --parameters Path=/dev/drbd0 does the trick. @Florian: Howto include this into the RA? Basically: Where do I get the "lun" from? -- Dr. Michael Schwartzkopff MultiNET Services GmbH Addresse: Bretonischer Ring 7; 85630 Grasbrunn; Germany Tel: +49 - 89 - 45 69 11 0 Fax: +49 - 89 - 45 69 11 21 mob: +49 - 174 - 343 28 75 mail: [email protected] web: www.multinet.de Sitz der Gesellschaft: 85630 Grasbrunn Registergericht: Amtsgericht München HRB 114375 Geschäftsführer: Günter Jurgeneit, Hubert Martens --- PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B Skype: misch42 _______________________________________________ Pacemaker mailing list [email protected] http://oss.clusterlabs.org/mailman/listinfo/pacemaker
