Hello, I try to increase the fence timeouts, but I as much as I try, I don't figure out how that works.
I see this thread http://osdir.com/ml/linux.highavailability.devel/2008-09/msg00128.html but also miss the outcome how to set timeouts. ##### Stonith ##### # very long on_time due to shared onboard NIC / IPMI primitive st-ipmi-1 stonith:external/ipmi \ params hostname=mds1 ipaddr=192.168.0.11 \ userid=root passwd=calvin interface=lanplus \ min_off_time=60 off_time=60 on_time=120 \ op start timeout=240 \ op stop timeout=240 \ op monitor interval=600 timeout=240 primitive st-ipmi-2 stonith:external/ipmi \ params hostname=mds2 ipaddr=192.168.0.12 \ userid=root passwd=calvin interface=lanplus \ min_off_time=60 off_time=60 on_time=120 \ op start timeout=240 \ op stop timeout=240 \ op monitor interval=600 timeout=240 location l-st-mds1 st-ipmi-1 -inf: mds1 location l-st-mds2 st-ipmi-2 -inf: mds2 ##### Stonith end ##### (This is with a rewritten external/ipmi, once I have tested it I'm going to send the patch. It has the advantage to check resets, but also needs a long reset time ...). I think according the thread above, somewhere there was written the start timeout is used. But then this value is gracefully ignored and the timeout is still 60s. So I tried crm_attribute --type op_defaults --attr-name timeout --attr-value 300s but this is also not used as default stonith timeout. I really would be glad if someone could tell me which value has the default stonith timeout and how to set timeouts per stonith resource. Thanks in advance, Bernd -- Bernd Schubert DataDirect Networks _______________________________________________ Pacemaker mailing list Pacemaker@oss.clusterlabs.org http://oss.clusterlabs.org/mailman/listinfo/pacemaker
