Hi,
I am running into this RSTP issue when running OSV 3.1.90 in the sandbox.
The following commands are used to create the bridges and the interfaces to
link them:
-----------------------------------------------------------------
ovs-appctl vlog/set dbg
ovs-vsctl add-br br0
ovs-vsctl add-br br1
ovs-vsctl \
-- add-port br0 p0-0 \
-- set interface p0-0 type=patch options:peer=p5-1 \
-- add-port br0 p0-1 \
-- set interface p0-1 type=patch options:peer=p1-0 \
\
-- add-port br1 p1-0 \
-- set interface p1-0 type=patch options:peer=p0-1 \
-- add-port br1 p1-1 \
-- set interface p1-1 type=patch options:peer=p2-0
---------------------------------------------------------------------------
When I try to enable the rstp with the following commands, the second
command on br0 will not return and I have to use control-C to kill the
process. From the log file, I can see the polling stopped after I enabled
rstp on br0. Here are the rstp enable commands used for this test:
--------------------------------------------------------------------------
ovs-vsctl -- set bridge br1 rstp_enable=true
ovs-vsctl -- set bridge br0 rstp_enable=true
---------------------------------------------------------------------------
It looks like this issue only shows with the rstp. The following stp
enable commands worked without the same issue.
--------------------------------------------------------------------------
ovs-vsctl -- set bridge br1 stp_enable=true
ovs-vsctl -- set bridge br0 stp_enable=true
---------------------------------------------------------------------------
Regards,
Heng
_______________________________________________
discuss mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
