Hi Greg,
Thanks for getting back to me.
ip link show:
~~~
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
team1 state UP mode DEFAULT group default qlen 1000
link/ether ac:1f:6b:3c:cc:e8 brd ff:ff:ff:ff:ff:ff
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
team1 state UP mode DEFAULT group default qlen 1000
link/ether ac:1f:6b:3c:cc:e8 brd ff:ff:ff:ff:ff:ff
4: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
mode DEFAULT group default qlen 1000
link/ether 00:1b:21:e4:a6:f4 brd ff:ff:ff:ff:ff:ff
5: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether 6a:e9:90:3b:d0:47 brd ff:ff:ff:ff:ff:ff
6: ovs1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UNKNOWN mode DEFAULT group default qlen 1000
link/ether ac:1f:6b:3c:cc:e8 brd ff:ff:ff:ff:ff:ff
7: team1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master ovs-system state UP mode DEFAULT group default qlen 1000
link/ether ac:1f:6b:3c:cc:e8 brd ff:ff:ff:ff:ff:ff
~~~
ip addr show:
~~~
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
team1 state UP group default qlen 1000
link/ether ac:1f:6b:3c:cc:e8 brd ff:ff:ff:ff:ff:ff
3: eno2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
team1 state UP group default qlen 1000
link/ether ac:1f:6b:3c:cc:e8 brd ff:ff:ff:ff:ff:ff
4: eno3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP
group default qlen 1000
link/ether 00:1b:21:e4:a6:f4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.16/24 brd 192.168.0.255 scope global noprefixroute eno3
valid_lft forever preferred_lft forever
inet6 fe80::21b:21ff:fee4:a6f4/64 scope link
valid_lft forever preferred_lft forever
5: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group default qlen 1000
link/ether 6a:e9:90:3b:d0:47 brd ff:ff:ff:ff:ff:ff
6: ovs1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UNKNOWN group default qlen 1000
link/ether ac:1f:6b:3c:cc:e8 brd ff:ff:ff:ff:ff:ff
7: team1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master ovs-system state UP group default qlen 1000
link/ether ac:1f:6b:3c:cc:e8 brd ff:ff:ff:ff:ff:ff
inet6 fe80::ae1f:6bff:fe3c:cce8/64 scope link
valid_lft forever preferred_lft forever
~~~
ovs-vsctl show
~~~
49b8d126-5e44-4ebc-8daa-8a73683d08a5
Bridge "ovs1"
Port "ovs1"
Interface "ovs1"
type: internal
Port "team1"
Interface "team1"
ovs_version: "2.12.0"
~~~
Cheers
Dulux-Oz
On 31/03/2021 03:21, Gregory Rose wrote:
On 3/29/2021 12:00 AM, duluxoz wrote:
Hi All,
Sorry if this is the wrong place to post this and/or I missed the
answer in the doco.
I'm new to OVS and have been struggling for days with this issue - I
hope someone can help.
I have a Centos 8 box loaded with kvm/qemu/libvert,
NetworkManager-ovs, and ovs (v12.2). The box has three nics in it
(en01, en02, en03). I am using eno3 as a management-nic (with an ip
address of 192.168.0.16) for the box itself, and the other two nics
set up as a lacp team (team1, no ip address, with team1-slave1 (eno1)
and team1-slave2 (eno2)).
Everything is working correctly, and my physical switch has the two
team nics both active and load-balanced.
I created an ovs (ovs1) and set it up with a static ipv4 address
(192.168.0.17). I also modified the ifcfg-team1 file to include the
references to ovs1.
But I can't ping ovs1 and nmcli says that ovs1 is down - and yes, I
have tried bringing it up (nmcli c up ovs1) - which gives an error.
What is the output of 'ip link show', 'ip addr show' and 'ovs-vsctl
show'?
- Greg
I have include the relevant ifcfg-* files below.
Can someone please tell/show me what I'm doing wrong - thanks.
ifcfg-ovs1:
~~~
DEVICE=ovs1
ONBOOT=yes
DEVICETYPE=ovs
TYPE=OVSBridge
BOOTPROTO=none
IPADDR=192.168.0.17
PREFIX=24
DEFROUTE=yes
GATEWAY=192.168.0.1
DNS1=192.168.0.2
DNS2=192.168.0.3
IPV6INIT=no
HOTPLUG=no
~~~
ifcfg-team1:
~~~
TEAM_CONFIG=$'{\"runner\": {\"name\": \"lacp\", \"active\": true,
\"fast_rate\": false, \"agg_select_policy\": \"lacp_prio\"},
\"link_watch\": {\"name\": \"ethtool\"}}'
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=no
NAME=team1
DEVICE=team1
ONBOOT=yes
DEVICETYPE=ovs
TYPE=OVSPort
OVS_BRIDGE=ovs1
~~~
ifcfg-team1-slave1:
~~~
ETHTOOL_OPTS="autoneg off speed 1000 duplex full"
NAME=team1-slave1
DEVICE=eno1
ONBOOT=yes
TEAM_MASTER=team1
DEVICETYPE=TeamPort
~~~
ifcfg-team1-slave2:
~~~
ETHTOOL_OPTS="autoneg off speed 1000 duplex full"
NAME=team1-slave2
DEVICE=eno2
ONBOOT=yes
TEAM_MASTER=team1
DEVICETYPE=TeamPort
~~~
Finally, nmcli d status give:
~~~
DEVICE TYPE STATE CONNECTION
eno1 ethernet connected team1-slave1
eno2 ethernet connected team1-slave2
eno3 ethernet connected eno3
team1 team connected team1
ovs1 ovs-interface disconnected --
lo loopback unmanaged --
ovs1 ovs-bridge unmanaged --
team1 ovs-port unmanaged --
ovs1 ovs-port unmanaged --
~~~
Cheers
Dulux-Oz
_______________________________________________
discuss mailing list
disc...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss
--
Peregrine IT Signature
*Matthew J BLACK*
M.Inf.Tech.(Data Comms)
MBA
B.Sc.
MACS (Snr), CP, IP3P
When you want it done /right/ ‒ the first time!
Phone: +61 4 0411 0089
Email: matt...@peregrineit.net <mailto:matt...@peregrineit.net>
Web: www.peregrineit.net <http://www.peregrineit.net>
View Matthew J BLACK's profile on LinkedIn
<http://au.linkedin.com/in/mjblack>
This Email is intended only for the addressee. Its use is limited to
that intended by the author at the time and it is not to be distributed
without the author’s consent. You must not use or disclose the contents
of this Email, or add the sender’s Email address to any database, list
or mailing list unless you are expressly authorised to do so. Unless
otherwise stated, Peregrine I.T. Pty Ltd accepts no liability for the
contents of this Email except where subsequently confirmed in
writing. The opinions expressed in this Email are those of the author
and do not necessarily represent the views of Peregrine I.T. Pty
Ltd. This Email is confidential and may be subject to a claim of legal
privilege.
If you have received this Email in error, please notify the author and
delete this message immediately.
_______________________________________________
discuss mailing list
disc...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-discuss