Hello all, I've just created a PR on Github to add a new platform, EN75xx MIPS. https://github.com/openwrt/openwrt/pull/17928
I made my best effort to explain the design decisions in the commit message itself, so I'll use this message to explain on a higher level the platform and my objectives for it. As I noted in the commit message, this is my first contribution so I would most appreciate any help I can get in moving it down the road toward being merge-able. The SmartFiber XP8421-B is a sub-$20 device available from Alibaba and it has a 900Mhz 34Kc Big Endian MIPS processor, 512M memory, 256M SPI NAND flash, 2x USB 2.0, 4x Gb Ethernet, Wifi MT7603 + MT7662E, XPON, and VoIP DSP. EcoNet used to be a subsidiary of MediaTek which produced telecom focused products before merging with Airoha, another subsidiary with-whom EcoNet shared a lot of IP. While they share a number of drivers, Airoha focused on the ARM(el) architecture while EcoNet focused on MIPS(eb). The airoha target on OpenWRT is an ARM target which is supporting their current flagship AN7581, my goal with introducing the en75 target is to support the EcoNet MIPS devices which will allow up-cycling of telecom e-waste and the use of bargain-bin devices based on EOL'd silicon. There are two sub-targets of the en75 target, those are en751221 and _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
