The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
JG928A has an rtl8231 on the alt mdio bus.
Add it to device tree.
Add fan gpio and alarm to device tree.
Add hwmon kernel module to image.
Known issues:
Due to
3810e897295cb66bc45a62bc2c0b70a01004fe3b
"realtek: ensure output drivers are enabled in RTL8231"
This will change the default fan speed from what
bootloader has set.
Signed-off-by: Evan Jobling <evan.jobl...@mslsc.com.au>
---
.../realtek/dts/rtl8393_hpe_1920-48g-poe.dts | 20 +++++++++++++++++++
target/linux/realtek/image/rtl839x.mk | 4 +++-
2 files changed, 23 insertions(+), 1 deletion(-)
diff --git a/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts
b/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts
index e242775434..297db96266 100644
--- a/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts
+++ b/target/linux/realtek/dts/rtl8393_hpe_1920-48g-poe.dts
@@ -5,8 +5,28 @@
/ {
compatible = "hpe,1920-48g-poe", "realtek,rtl8393-soc";
model = "HPE 1920-48G-PoE (JG928A)";
+
+ gpio1: rtl8231-gpio {
+ compatible = "realtek,rtl8231-gpio";
+ #gpio-cells = <2>;
+ gpio-controller;
+ indirect-access-bus-id = <0>;
+ };
+
+ gpio_fan_array {
+ compatible = "gpio-fan";
+ target-rpm = <10000>;
+
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <5000 0>,
+ <8200 1>;
+
+ alarm-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ #cooling-cells = <2>;
+ };
};
+
&uart1 {
status = "okay";
};
diff --git a/target/linux/realtek/image/rtl839x.mk
b/target/linux/realtek/image/rtl839x.mk
index 14d23ff371..806ed5e70d 100644
--- a/target/linux/realtek/image/rtl839x.mk
+++ b/target/linux/realtek/image/rtl839x.mk
@@ -21,7 +21,9 @@ define Device/hpe_1920-48g-poe
$(Device/hpe_1920)
SOC := rtl8393
DEVICE_MODEL := 1920-48G-PoE (JG928A)
- DEVICE_PACKAGES += realtek-poe
+ DEVICE_PACKAGES += \
+ realtek-poe \
+ kmod-hwmon-gpiofan
H3C_DEVICE_ID := 0x0001002b
endef
TARGET_DEVICES += hpe_1920-48g-poe
--
2.39.5
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
