The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
before mac addresses were out of order.
Now order is correct.
Known issues:
conduit 0 and conduit 1 have the same MAC as some of the
switchports.
Signed-off-by: Evan Jobling <evan.jobl...@mslsc.com.au>
---
target/linux/qoriq/base-files/etc/board.d/02_network | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/target/linux/qoriq/base-files/etc/board.d/02_network
b/target/linux/qoriq/base-files/etc/board.d/02_network
index 5e2780ea53..d4e534ecbb 100644
--- a/target/linux/qoriq/base-files/etc/board.d/02_network
+++ b/target/linux/qoriq/base-files/etc/board.d/02_network
@@ -43,12 +43,11 @@ watchguard,firebox-m300)
eth_mac_offset=0x186d
- for eth in $(find /sys/class/net/ -name 'eth[3-7]' -print); do
- device="$(basename "$eth")"
+ for eth in "eth3" "eth4" "eth5" "eth6" "eth7"; do
mac="$(mtd_get_mac_text wg_cfg0 "$eth_mac_offset")"
- switchports="$switchports $device"
- ucidef_set_network_device_mac "$device" "$mac"
- wg_set_opt_interface "$device" "${device#eth}"
+ switchports="$switchports $eth"
+ ucidef_set_network_device_mac "$eth" "$mac"
+ wg_set_opt_interface "$eth" "${eth#eth}"
eth_mac_offset=$(printf "0x%X\n" $(( $eth_mac_offset + 0x14)))
done
--
2.39.5
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
