From: Arınç ÜNAL <arinc.u...@arinc9.com> ASUS RT-AC3200 and ASUS RT-AC5300 are AC3200 and AC5300 routers, respectively, featuring 5 Ethernet ports over the integrated Broadcom switch.
ASUS RT-AC3200 hardware info: * Processor: Broadcom BCM4709A0 dual-core @ 1.0 GHz * Switch: BCM53012 in BCM4709A0 * DDR3 RAM: 256 MB * Flash: 128 MB * 2.4GHz: BCM43602 3x3 single chip 802.11b/g/n SoC * 5GHz: BCM43602 3x3 two chips 802.11a/n/ac SoC * Ports: 4 LAN Ports, 1 WAN Port ASUS RT-AC5300 hardware info: * Processor: Broadcom BCM4709C0 dual-core @ 1.4 GHz * Switch: BCM53012 in BCM4709C0 * DDR3 RAM: 512 MB * Flash: 128 MB * 2.4GHz: BCM4366 4x4 single chip 802.11b/g/n SoC * 5GHz: BCM4366 4x4 two chips 802.11a/n/ac SoC * Ports: 4 LAN Ports, 1 WAN Port Flashing instructions: * Boot to CFE Recovery Mode by holding the reset button while power-on. * Connect to the router with an ethernet cable. * Set IPv4 address of the computer to 192.168.1.2 subnet 255.255.255.0. * Head to http://192.168.1.1. * Reset NVRAM. * Upload the OpenWrt image. CFE bootloader may reject flashing the image due to image integrity check. In that case, follow the instructions below. * Rename the OpenWrt image as firmware.trx. * Run a TFTP server and make it serve the firmware.trx file. * Run the URL below on a browser or curl. http://192.168.1.1/do.htm?cmd=flash+-noheader+192.168.1.2:firmware.trx+flash0.trx Signed-off-by: Arınç ÜNAL <arinc.u...@arinc9.com> --- target/linux/bcm53xx/image/Makefile | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile index 88590c3755..a263e2caed 100644 --- a/target/linux/bcm53xx/image/Makefile +++ b/target/linux/bcm53xx/image/Makefile @@ -180,6 +180,22 @@ define Device/asus_rt-ac3100 endef TARGET_DEVICES += asus_rt-ac3100 +define Device/asus_rt-ac3200 + $(call Device/asus) + DEVICE_MODEL := RT-AC3200 + DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB3_PACKAGES) + ASUS_PRODUCTID := RT-AC3200 +endef +TARGET_DEVICES += asus_rt-ac3200 + +define Device/asus_rt-ac5300 + $(call Device/asus) + DEVICE_MODEL := RT-AC5300 + DEVICE_PACKAGES := $(BRCMFMAC_4366B1) $(BRCMFMAC_4366C0) $(USB3_PACKAGES) + ASUS_PRODUCTID := RT-AC5300 +endef +TARGET_DEVICES += asus_rt-ac5300 + define Device/asus_rt-ac56u $(call Device/asus) DEVICE_MODEL := RT-AC56U -- 2.40.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
