On Thu, 16 Nov 2023 at 10:53, Luca Olivetti <l...@ventoso.org> wrote: > > El 17/12/19 a les 12:52, David Bauer ha escrit: > > > 3. Configure the bootargs and bootcmd for OpenWrt. > > $ setenv bootargs_openwrt "setenv bootargs console=ttyMSM1,9600n8" > > $ setenv nandboot_openwrt "run bootargs_openwrt; ubi part aos1; > > ubi read 0x85000000 kernel; bootm 0x85000000" > > $ setenv ramboot_openwrt "run bootargs_openwrt; > > setenv ipaddr 192.168.1.105; setenv serverip 192.168.1.75; > > netget; set fdt_high 0x87000000; bootm" > > $ setenv bootcmd "run nandboot_openwrt" > > $ saveenv > > > Hello, > > as explained here > > https://forum.openwrt.org/t/aruba-iap-11-apboot-downgrade-invalid-instant-small-business-image/120921 > > > it is no longer possible to install openwrt because they have removed > the bootm command from apboot. > > I asked here > https://forum.openwrt.org/t/apboot-dump-for-aruba-iap11-ap303-or-compatible-u-boot/177595/2
I have shared a dump from my AP11 that worked with OpenWrt. But please make sure they did not enable secure boot in the mean time. Regards, Robert > > for the old apboot image (it's possible to flash the spi from the new > apboot) but I'm wondering if it would be possible to compile a > compatible u-boot for this AP? > > > Bye > -- > Luca > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
