I guess the theme of this batch is cleanup of x86 kernels. Along the way some of this stretches onto other platforms. Appears several years ago x86 had been rather more build targets. Since then they've been merged somewhat haphazardly.
A few of these were previously reviewed by Philip Prindeville. Since then they've been rebased and some time has gone by. I don't believe this invalidates the review, but I feel I should mention this. Changing the default of CONFIG_HW_RANDOM is a 10-15 line reduction right now. There is a pattern of recent target being more likely to set CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM=n being older targets. Given this, right now this is a small win, but I expect it to increase in value over time. I'm wondering how CONFIG_FB_NOTIFY=y snuck into the common configuration and CONFIG_FS_MBCACHE=y got into so many target configurations. The explicit setting matches the defaults, so pull these from the configurations. Hopefully no one has used ext2 in the past decade. Yet one configuration value was still being set. Also pulling ext2 via ext4. Simply cleaning out remnants of this historic Linux filesystem. Some bits of Geode configuration had leaked into x86 common area. Push them strictly onto the Geode builds. Similarly CONFIG_M686=y had been set in the x86 common files. Yet every build overrode this. Simply set the common setting the correct way. The Intel i915 pairs with the Intel Pentium 4. The "legacy" target doesn't match this, so remove it from there. Several packages were checking for TARGET_x86_64. This is incorrect as this would need to match both sides if the target was split. As such match the architecture, not the specific target. Brought up previously. The x32 (AMD64 with ILP32) setting seems an excellent match for OpenWRT's goals. Notably if OpenWRT is being used on a system (or VM) with less than 4GB of memory, the address space is less valuable, but the extra registers are valuable. Since OpenWRT is nominally focussed on embedded targets, this fits. Could be a while before enough bugs have been squeezed out of x32 for it to be release-worthy. Yet it seems appropriate to try to get an experimental build operational. The patch merely enables kernel support, I expect userspace to take some time. Elliott Mitchell (10): kernel: change CONFIG_HW_RANDOM default to y kernel/generic: remove CONFIG_FB_NOTIFY kernel: purge CONFIG_FS_MBCACHE kernel: remove ext2 support from kernel kernel/x86: move Geode HW random from generic to geode kernel/x86: move SCx200 support from generic to geode kernel/x86: remove CONFIG_M686 from common configuration kernel/x86: remove i915 from x86/legacy kernels packages/x86: detect architecture, not x86/64 target kernel/x86: enable x32 support for amd64 package/firmware/intel-microcode/Makefile | 2 +- package/kernel/linux/modules/crypto.mk | 2 +- package/kernel/linux/modules/virt.mk | 4 +-- package/libs/wolfssl/Makefile | 2 +- target/linux/airoha/config-5.15 | 1 - target/linux/apm821xx/config-5.15 | 1 + target/linux/apm821xx/config-6.1 | 1 + target/linux/archs38/config-5.15 | 2 +- target/linux/armsr/armv7/config-6.1 | 1 + target/linux/armsr/armv8/config-6.1 | 1 - target/linux/armsr/config-6.1 | 1 - target/linux/at91/sam9x/config-5.15 | 2 -- target/linux/at91/sama5/config-5.15 | 2 -- target/linux/at91/sama7/config-5.15 | 2 -- target/linux/ath25/config-5.15 | 1 - target/linux/ath79/config-5.15 | 1 + target/linux/ath79/config-6.1 | 1 + target/linux/bcm27xx/bcm2708/config-6.1 | 2 -- target/linux/bcm27xx/bcm2709/config-6.1 | 2 -- target/linux/bcm27xx/bcm2710/config-6.1 | 2 -- target/linux/bcm27xx/bcm2711/config-6.1 | 2 -- target/linux/bcm47xx/config-5.15 | 1 - target/linux/bcm4908/config-5.15 | 1 + target/linux/bcm4908/config-6.1 | 1 + target/linux/bcm53xx/config-5.15 | 1 - target/linux/bcm53xx/config-6.1 | 1 - target/linux/bcm63xx/config-5.15 | 1 - target/linux/bmips/bcm6318/config-5.15 | 1 + target/linux/bmips/bcm6318/config-6.1 | 1 + target/linux/bmips/bcm63268/config-5.15 | 1 - target/linux/bmips/bcm63268/config-6.1 | 1 - target/linux/bmips/bcm6328/config-5.15 | 1 + target/linux/bmips/bcm6328/config-6.1 | 1 + target/linux/bmips/bcm6358/config-5.15 | 1 + target/linux/bmips/bcm6358/config-6.1 | 1 + target/linux/bmips/bcm6362/config-5.15 | 1 - target/linux/bmips/bcm6362/config-6.1 | 1 - target/linux/bmips/bcm6368/config-5.15 | 1 - target/linux/bmips/bcm6368/config-6.1 | 1 - target/linux/gemini/config-6.1 | 2 -- target/linux/generic/config-5.15 | 6 ++--- target/linux/generic/config-6.1 | 6 ++--- target/linux/imx/config-5.15 | 2 -- target/linux/ipq40xx/config-6.1 | 1 - target/linux/ipq806x/config-6.1 | 1 - target/linux/ixp4xx/config-6.1 | 2 -- target/linux/kirkwood/config-5.15 | 1 - target/linux/lantiq/ase/config-5.15 | 1 - target/linux/lantiq/falcon/config-5.15 | 1 + target/linux/lantiq/xrx200/config-5.15 | 1 - target/linux/lantiq/xway/config-5.15 | 1 - target/linux/lantiq/xway_legacy/config-5.15 | 1 + target/linux/layerscape/armv7/config-5.15 | 2 -- target/linux/layerscape/armv7/config-6.1 | 2 -- target/linux/layerscape/armv8_64b/config-5.15 | 2 -- target/linux/layerscape/armv8_64b/config-6.1 | 2 -- target/linux/malta/config-5.15 | 2 +- target/linux/malta/config-6.1 | 2 +- target/linux/mediatek/filogic/config-5.15 | 2 -- target/linux/mediatek/filogic/config-6.1 | 2 -- target/linux/mediatek/mt7622/config-5.15 | 2 -- target/linux/mediatek/mt7622/config-6.1 | 2 -- target/linux/mediatek/mt7623/config-5.15 | 2 -- target/linux/mediatek/mt7623/config-6.1 | 2 -- target/linux/mediatek/mt7629/config-5.15 | 1 - target/linux/mediatek/mt7629/config-6.1 | 1 - target/linux/mpc85xx/config-5.15 | 1 - target/linux/mvebu/config-5.15 | 2 -- target/linux/mvebu/config-6.1 | 2 -- target/linux/mxs/config-5.15 | 2 +- target/linux/mxs/config-6.1 | 2 +- target/linux/octeon/config-5.15 | 2 -- target/linux/octeontx/config-5.15 | 1 - target/linux/omap/config-5.15 | 2 -- target/linux/oxnas/config-5.15 | 1 + target/linux/oxnas/ox810se/config-default | 1 - target/linux/pistachio/config-5.15 | 2 +- target/linux/qoriq/config-5.15 | 2 -- target/linux/qualcommax/config-6.1 | 1 + target/linux/ramips/mt7620/config-5.15 | 1 + target/linux/ramips/mt7621/config-5.15 | 1 + target/linux/ramips/mt76x8/config-5.15 | 1 + target/linux/ramips/rt288x/config-5.15 | 1 + target/linux/ramips/rt305x/config-5.15 | 1 + target/linux/ramips/rt3883/config-5.15 | 1 + target/linux/realtek/rtl838x/config-5.15 | 1 + target/linux/realtek/rtl839x/config-5.15 | 1 + target/linux/realtek/rtl930x/config-5.15 | 1 + target/linux/realtek/rtl931x/config-5.15 | 1 + target/linux/rockchip/armv8/config-5.15 | 2 +- target/linux/rockchip/armv8/config-6.1 | 2 +- target/linux/sifiveu/config-6.1 | 2 +- target/linux/sunxi/config-5.15 | 2 -- target/linux/sunxi/config-6.1 | 2 -- target/linux/tegra/config-5.15 | 2 +- target/linux/uml/config-5.15 | 2 -- target/linux/uml/config-6.1 | 2 -- target/linux/x86/64/config-5.15 | 1 - target/linux/x86/64/config-6.1 | 2 -- target/linux/x86/config-5.15 | 12 +++------ target/linux/x86/config-6.1 | 13 ++++------ target/linux/x86/generic/config-5.15 | 1 - target/linux/x86/generic/config-6.1 | 1 - target/linux/x86/geode/config-5.15 | 6 ++++- target/linux/x86/geode/config-6.1 | 6 ++++- target/linux/x86/legacy/config-5.15 | 26 +------------------ target/linux/x86/legacy/config-6.1 | 26 +------------------ target/linux/x86/modules.mk | 2 +- target/linux/zynq/config-5.15 | 2 +- 109 files changed, 69 insertions(+), 181 deletions(-) -- (\___(\___(\______ --=> 8-) EHM <=-- ______/)___/)___/) \BS ( | ehem+open...@m5p.com PGP 87145445 | ) / \_CS\ | _____ -O #include <stddisclaimer.h> O- _____ | / _/ 8A19\___\_|_/58D2 7E3D DDF4 7BA6 <-PGP-> 41D1 B375 37D0 8714\_|_/___/5445 -- (\___(\___(\______ --=> 8-) EHM <=-- ______/)___/)___/) \BS ( | ehem+sig...@m5p.com PGP 87145445 | ) / \_CS\ | _____ -O #include <stddisclaimer.h> O- _____ | / _/ 8A19\___\_|_/58D2 7E3D DDF4 7BA6 <-PGP-> 41D1 B375 37D0 8714\_|_/___/5445 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
