From: Shiji Yang <yangshij...@qq.com>

The mtd partition node name should be "partition@${offset}".
However, the offsets of the PSG1208 don't match the partition
'reg' properties. This patch correct the wrong offsets.

Signed-off-by: Shiji Yang <yangshij...@qq.com>
---
 target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts 
b/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts
index 4e123c32bd..fc4f1d6258 100644
--- a/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts
+++ b/target/linux/ramips/dts/mt7620a_phicomm_psg1208.dts
@@ -67,19 +67,19 @@
                                read-only;
                        };
 
-                       partition@20000 {
+                       partition@30000 {
                                label = "u-boot-env";
                                reg = <0x30000 0x10000>;
                                read-only;
                        };
 
-                       factory: partition@30000 {
+                       factory: partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
                        };
 
-                       partition@40000 {
+                       partition@50000 {
                                compatible = "denx,uimage";
                                label = "firmware";
                                reg = <0x50000 0x7b0000>;
-- 
2.39.2


_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to