The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
From: Shiji Yang <yangshij...@qq.com>
The 'KERNEL' is not referenced by other objects, so double '$$' will
cause shell unable to parse the variable 'BLOCKSIZE':
dd ... bs=$(BLOCKSIZE) conv=sync
bash: line 1: BLOCKSIZE: command not found
fixes: 09a0efbe83(ramips: set default BLOCKSIZE to 64k for nor flash devices)
Signed-off-by: Shiji Yang <yangshij...@qq.com>
---
target/linux/ramips/image/rt288x.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ramips/image/rt288x.mk
b/target/linux/ramips/image/rt288x.mk
index 3d2d0c7ae0..c93d7d78e5 100644
--- a/target/linux/ramips/image/rt288x.mk
+++ b/target/linux/ramips/image/rt288x.mk
@@ -15,7 +15,7 @@ define Device/airlink101_ar670w
DEVICE_VENDOR := Airlink
DEVICE_MODEL := AR670W
IMAGE_SIZE := 3840k
- KERNEL := $(KERNEL_DTB) | pad-to $$$$(BLOCKSIZE)
+ KERNEL := $(KERNEL_DTB) | pad-to $$(BLOCKSIZE)
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size | \
wrg-header wrgn16a_airlink_ar670w
--
2.30.2
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
