W dniu 03.05.2023 o 20:30, Nick pisze:
On 5/3/23 19:23, Aleksander Bajkowski wrote:
W dniu 03.05.2023 o 19:11, Nick pisze:
On 5/3/23 11:07, Nick wrote:
I will also try to fetch me some lantiq device from somewhere to
support fixing the fdb issues and re-adding it back to 23.X or
fixing it before the branch.
I organized myself now a **FRITZ!Box 7320** and **TP Link
TD-W8970**. So if anyone wants me to test anything just write me.
Meanwhile I will also have a look at this issue.
This issue only affects the xrx200 target (gswip driver). AVM 7320 is
supported by the xway subtarget and has built-in tantos switch.
The TP Link TD-W8970 is a xrx200 target. :)
So we just could have disabled the xrx200 target instead of setting
the whole target to source only?
Yes, I think it's a good idea.
I made a mistake, I have a 7330. However, I have also some network
issues with this device (no connectity to device but a link).
This is a known limitation on the AVM 7320/7330. The DSA driver for this
switch is missing. Only the first ethernet port works only if the cable
is connected at boot. Some time ago I acquired an AVM 7330 and started
writing a driver to replace the patch carried downstream.
Bests
Nick
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
