It was found this device uses a single tri-color power/status LED
rather than individual red/orange LEDs, which also supports green.
Add GPIO for green color and use with `boot` and `running` aliases.
Signed-off-by: Sebastian Schaper <open...@sebastianschaper.net>
---
.../linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
index 1aa3f7c91b..818d2d8c41 100644
--- a/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
+++ b/target/linux/ramips/dts/mt7621_dlink_dap-x1860-a1.dts
@@ -15,9 +15,9 @@
aliases {
label-mac-device = &gmac0;
- led-boot = &led_power_orange;
+ led-boot = &led_power_green;
led-failsafe = &led_power_red;
- led-running = &led_power_orange;
+ led-running = &led_power_green;
led-upgrade = &led_power_red;
};
@@ -40,15 +40,20 @@
leds {
compatible = "gpio-leds";
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
led_power_red: power_red {
label = "red:power";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
- led_power_orange: power_orange {
+ power_orange {
label = "orange:power";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- default-state = "on";
};
rssihigh {
--
2.34.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
