Use <mdio>:<addr>:<speed> trigger instead of netdev(link) trigger for
Fortinet FortiGate 50E, to indicate link speed on the each phys.
1000 Mbps: Green
100 Mbps : Amber
10 Mbps : (turn off)
Fixes: 102dc5a62506 ("mvebu: add support for Fortinet FortiGate 50E")
Signed-off-by: INAGAKI Hiroshi <musashino.o...@gmail.com>
---
.../mvebu/cortexa9/base-files/etc/board.d/01_leds | 9 ---------
.../arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts | 12 ++++++++++++
2 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
index bfc589e6c0..2b045d0945 100644
--- a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
+++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds
@@ -15,15 +15,6 @@ ctera,c200-v2)
ucidef_set_led_usbport "usb2" "USB2" "green:usb-2" "usb1-port1"
"usb2-port1"
ucidef_set_led_usbport "usb3" "USB3" "green:usb-1" "usb1-port2"
"usb2-port2"
;;
-fortinet,fg-50e)
- ucidef_set_led_netdev "wan1_link" "WAN1 Link" "green:speed_wan1" "eth1"
"link"
- ucidef_set_led_netdev "wan2_link" "WAN2 Link" "green:speed_wan2" "eth2"
"link"
- ucidef_set_led_netdev "lan1_link" "LAN1 Link" "green:speed_lan1" "lan1"
"link"
- ucidef_set_led_netdev "lan2_link" "LAN2 Link" "green:speed_lan2" "lan2"
"link"
- ucidef_set_led_netdev "lan3_link" "LAN3 Link" "green:speed_lan3" "lan3"
"link"
- ucidef_set_led_netdev "lan4_link" "LAN4 Link" "green:speed_lan4" "lan4"
"link"
- ucidef_set_led_netdev "lan5_link" "LAN5 Link" "green:speed_lan5" "lan5"
"link"
- ;;
kobol,helios4)
ucidef_set_led_usbport "USB" "USB" "helios4:green:usb" "usb1-port1"
"usb2-port1" "usb3-port1" "usb4-port1" "usb5-port1"
;;
diff --git
a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts
b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts
index 506e01f0ff..61d2da1755 100644
--- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts
+++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts
@@ -97,72 +97,84 @@
label = "green:speed_wan1";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
};
led-7 {
label = "green:speed_wan2";
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
};
led-8 {
label = "amber:speed_lan5";
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
};
led-9 {
label = "green:speed_lan5";
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
};
led-10 {
label = "green:speed_lan4";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:01:1Gbps";
};
led-11 {
label = "amber:speed_lan4";
gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:01:100Mbps";
};
led-12 {
label = "amber:speed_lan3";
gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:02:100Mbps";
};
led-13 {
label = "green:speed_lan3";
gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:02:1Gbps";
};
led-14 {
label = "green:speed_lan1";
gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:04:1Gbps";
};
led-15 {
label = "amber:speed_lan1";
gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:04:100Mbps";
};
led-16 {
label = "green:speed_lan2";
gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
+ linux,default-trigger = "mv88e6xxx-1:03:1Gbps";
};
led-17 {
label = "amber:speed_lan2";
gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_AMBER>;
+ linux,default-trigger = "mv88e6xxx-1:03:100Mbps";
};
};
--
2.39.1.windows.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
