On 2/13/23 15:01, Peter Naulls wrote:
ich might be the misreporting.
In our driver, it comes out as:
[ 16.091826] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB
size: 128
[ 16.107083] mt7621-nand 1e003000.nand: ECC strength adjusted to 12 bits
I tried adjusting in nand_onfi.c ecc_bits = 12 and spare_bytes_per_page to 112,
to no avail.
I set that back, and then in mt7621_nfc_calc_ecc_strength tried setting the
strength to 1, with no obvious difference.
I found this:
https://forum.openwrt.org/t/fritz-repeater-3000-ubirmvol/119513/26?page=2
And the Fritz!Box 7520 V2 uses the exact same part. I haven't yet tried
to track down any patches, etc for this.
https://boxmatrix.info/wiki/FRITZ!Box_7520_v2
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
