Wifi LED did not work using phy0radio, which somehow slipped through in
the previous testing
Signed-off-by: Florian Maurer <f.mau...@outlook.de>
(cherry picked from commit 2e3d1edf59109d6329a00d90b1e953261d602af5)
---
.../arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi | 1 +
target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds | 1 -
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git
a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
index 1158aa371e..1a7a11db42 100644
---
a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
+++
b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi
@@ -80,6 +80,7 @@
wifi: wifi {
label = "green:wlan";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
};
power_red: power2 {
diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
index 8f59538b83..0c80aaa3b8 100644
--- a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
+++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
@@ -30,7 +30,6 @@ arcadyan,arv7519rw22)
arcadyan,vgv7510kw22-nor|\
arcadyan,vgv7510kw22-brn)
ucidef_set_led_netdev "internet" "internet" "$led_internet" "wan"
- ucidef_set_led_wlan "wifi" "wifi" "green:wlan" "phy0radio"
;;
zyxel,p-2812hnu-f1|\
zyxel,p-2812hnu-f3)
--
2.34.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
