This function currently prints three messages for every switch port at
KERN_INFO level. This takes a considerable amount of time during bootup
and can even trigger an external watchdog.
Replace these log messages by a single one at KERN_DEBUG level.
Signed-off-by: Jan Hoffmann <j...@3e8.eu>
---
.../realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c | 8 +-------
.../realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c | 8 +-------
2 files changed, 2 insertions(+), 14 deletions(-)
diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
index e86ff9ccdfed..63c024c81e82 100644
--- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
+++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c
@@ -323,7 +323,6 @@ static int __init rtl83xx_mdio_probe(struct
rtl838x_switch_priv *priv)
if (of_property_read_u32(dn, "reg", &pn))
continue;
- pr_info("%s found port %d\n", __func__, pn);
phy_node = of_parse_phandle(dn, "phy-handle", 0);
if (!phy_node) {
if (pn != priv->cpu_port)
@@ -331,14 +330,9 @@ static int __init rtl83xx_mdio_probe(struct
rtl838x_switch_priv *priv)
continue;
}
- pr_info("%s port %d has phandle\n", __func__, pn);
if (of_property_read_u32(phy_node, "sds",
&priv->ports[pn].sds_num))
priv->ports[pn].sds_num = -1;
- else {
- pr_info("%s sds port %d is %d\n", __func__, pn,
- priv->ports[pn].sds_num);
- }
- pr_info("%s port %d has SDS\n", __func__,
priv->ports[pn].sds_num);
+ pr_debug("%s port %d has SDS %d\n", __func__, pn,
priv->ports[pn].sds_num);
if (of_get_phy_mode(dn, &interface))
interface = PHY_INTERFACE_MODE_NA;
diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c
b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c
index b5afed0ef553..8b0b55d89199 100644
--- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c
+++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c
@@ -323,7 +323,6 @@ static int __init rtl83xx_mdio_probe(struct
rtl838x_switch_priv *priv)
if (of_property_read_u32(dn, "reg", &pn))
continue;
- pr_info("%s found port %d\n", __func__, pn);
phy_node = of_parse_phandle(dn, "phy-handle", 0);
if (!phy_node) {
if (pn != priv->cpu_port)
@@ -331,14 +330,9 @@ static int __init rtl83xx_mdio_probe(struct
rtl838x_switch_priv *priv)
continue;
}
- pr_info("%s port %d has phandle\n", __func__, pn);
if (of_property_read_u32(phy_node, "sds",
&priv->ports[pn].sds_num))
priv->ports[pn].sds_num = -1;
- else {
- pr_info("%s sds port %d is %d\n", __func__, pn,
- priv->ports[pn].sds_num);
- }
- pr_info("%s port %d has SDS\n", __func__,
priv->ports[pn].sds_num);
+ pr_debug("%s port %d has SDS %d\n", __func__, pn,
priv->ports[pn].sds_num);
if (of_get_phy_mode(dn, &interface))
interface = PHY_INTERFACE_MODE_NA;
--
2.38.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
