The frequency appears as unlisted initial frequency. Removed it as Hauke suggested.
Signed-off-by: Jan-Niklas Burfeind <g...@aiyionpri.me> --- This resolves part of the problem in #11104 on GitHub [1]. The "Waiting for root device /dev/mmcblk0p2..."-issue still remains and leaves the device unbootable about half the time. Without this the device boots less often. [1] https://github.com/openwrt/openwrt/issues/11104 .../patches/252-sunxi-h3-add-support-for-nanopi-r1.patch | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch b/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch index 0db7be5421..058b29d95b 100644 --- a/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch +++ b/package/boot/uboot-sunxi/patches/252-sunxi-h3-add-support-for-nanopi-r1.patch @@ -173,7 +173,7 @@ Signed-off-by: Jayantajit Gogoi <jayanta.gogoi...@gmail.com> +}; --- /dev/null +++ b/configs/nanopi_r1_defconfig -@@ -0,0 +1,22 @@ +@@ -0,0 +1,21 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y @@ -186,7 +186,6 @@ Signed-off-by: Jayantajit Gogoi <jayanta.gogoi...@gmail.com> +CONFIG_NR_DRAM_BANKS=1 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_CONSOLE_MUX=y -+CONFIG_SYS_CLK_FREQ=480000000 +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set -- 2.38.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
