On Wed, Nov 23, 2022 at 12:24:09PM +0900, INAGAKI Hiroshi wrote: > Use ARTIFACTS to generate initramfs-based factory image of I-O DATA > WN-AX1167GR instead of redundant recipe which generate on > KERNEL_INITRAMFS. > > Note: > > WN-AX1167GR has 2x OS images on stock firmware. > > stock log: > > flash manufacture id: c2, device id 20 18 > MX25L12805D(c2 2018c220) (16384 Kbytes) > mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) > .numeraseregions = 0 > Creating 10 MTD partitions on "raspi": > 0x000000000000-0x000001000000 : "ALL" > 0x000000000000-0x000000030000 : "Bootloader" > 0x000000030000-0x000000040000 : "Config " > 0x000000040000-0x000000050000 : "Factory" > 0x000000050000-0x000000060000 : "iNIC_rf" > 0x000000060000-0x0000007e0000 : "Kernel" > 0x000000800000-0x000000f80000 : "app" > 0x000000f90000-0x000000fa0000 : "Key" > 0x000000fa0000-0x000000fb0000 : "backup" > 0x000000fb0000-0x000001000000 : "storage" > > 1st image is "Kernel" and 2nd is "app" when booted from 1st image. > In OpenWrt, those 2x partitions are combined to "firmware" with > undefined (empty) areas (0x7e0000-0x7fffff, 0xf80000-0xf8ffff). > > The size of an OS image partition is 0x780000 (7680 KiB = 7.5 MiB), so > check-size for initramfs-factory image needs to be called with the size. > > Signed-off-by: INAGAKI Hiroshi <musashino.o...@gmail.com> > --- > target/linux/ramips/image/mt7621.mk | 24 +++++------------------- > 1 file changed, 5 insertions(+), 19 deletions(-) > > diff --git a/target/linux/ramips/image/mt7621.mk > b/target/linux/ramips/image/mt7621.mk > index 943fc62ecd..0e3f1cf0f5 100644 > --- a/target/linux/ramips/image/mt7621.mk > +++ b/target/linux/ramips/image/mt7621.mk > @@ -49,23 +49,6 @@ define Build/haier-sim_wr1800k-factory > $(CP) $(1) $(BIN_DIR)/ > endef > > -define Build/iodata-factory > - $(eval fw_size=$(word 1,$(1))) > - $(eval fw_type=$(word 2,$(1))) > - $(eval product=$(word 3,$(1))) > - $(eval factory_bin=$(word 4,$(1))) > - if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt > "$(fw_size)" ]; then \ > - $(CP) $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) $(factory_bin); \ > - $(STAGING_DIR_HOST)/bin/mksenaofw \ > - -r 0x30a -p $(product) -t $(fw_type) \ > - -e $(factory_bin) -o $(factory_bin).new; \ > - mv $(factory_bin).new $(factory_bin); \ > - $(CP) $(factory_bin) $(BIN_DIR)/; \ > - else \ > - echo "WARNING: initramfs kernel image too big, cannot generate > factory image (actual $$(stat -c%s $@); max $(fw_size))" >&2; \ > - fi > -endef > - > define Build/iodata-mstc-header > ( \ > data_size_crc="$$(dd if=$@ ibs=64 skip=1 2>/dev/null | gzip -c > | \ > @@ -972,10 +955,13 @@ define Device/iodata_wn-ax1167gr > $(Device/dsa-migration) > $(Device/uimage-lzma-loader) > IMAGE_SIZE := 15552k > - KERNEL_INITRAMFS := $$(KERNEL) | \ > - iodata-factory 7864320 4 0x1055 > $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.bin > DEVICE_VENDOR := I-O DATA > DEVICE_MODEL := WN-AX1167GR > +ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) > + ARTIFACTS := initramfs-factory.bin > + ARTIFACT/initramfs-factory.bin := append-image initramfs-kernel.bin | \
Please use 'append-image-stage' so this will work also with the ImageBuilder where initramfs is not being generated/present. > + check-size 7680k | senao-header -r 0x30a -p 0x1055 -t 4 > +endif > DEVICE_PACKAGES := kmod-mt7603 kmod-mt76x2 > endef > TARGET_DEVICES += iodata_wn-ax1167gr > -- > 2.36.1.windows.1 > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
